After the state is committed, we readout the HW registers and compare
the HW state with the SW state that we just committed.
For Transcdoer port sync, we add master_transcoder and the
salves bitmask to the crtc_state, hence we need to read those during
the HW state readout to avoid pipe state mismatch.
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Cc: Matt Roper <matthew.d.ro...@intel.com>
Cc: Jani Nikula <jani.nik...@intel.com>
Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 44 ++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index f359a6212574..7156b1b4c6c5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -10271,6 +10271,47 @@ static void haswell_get_ddi_port_state(struct
intel_crtc *crtc,
}
}
+static void icelake_get_trans_port_sync_config(struct intel_crtc *crtc,
+ struct intel_crtc_state
*pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ u32 trans_port_sync, transcoders, master_select;
+ enum transcoder cpu_transcoder;
+
+ trans_port_sync =
I915_READ(TRANS_DDI_FUNC_CTL2(pipe_config->cpu_transcoder));
+ if (trans_port_sync & PORT_SYNC_MODE_ENABLE) {
+ master_select = trans_port_sync &
+ PORT_SYNC_MODE_MASTER_SELECT_MASK;
+ switch (master_select) {
+ case 1:
+ pipe_config->master_transcoder = TRANSCODER_A;
+ break;
+ case 2:
+ pipe_config->master_transcoder = TRANSCODER_B;
+ break;
+ case 3:
+ pipe_config->master_transcoder = TRANSCODER_C;
+ break;
+ default:
+ pipe_config->master_transcoder = TRANSCODER_EDP;
+ break;
+ }
+ } else
+ pipe_config->master_transcoder = INVALID_TRANSCODER;
+
+ transcoders = BIT(TRANSCODER_EDP) |
+ BIT(TRANSCODER_A) |
+ BIT(TRANSCODER_B) |
+ BIT(TRANSCODER_C);
+ for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
+ trans_port_sync =
I915_READ(TRANS_DDI_FUNC_CTL2(cpu_transcoder));
+
+ if (trans_port_sync & PORT_SYNC_MODE_ENABLE)
+ pipe_config->sync_mode_slaves_mask |=
BIT(cpu_transcoder);
+ }
+}
+
static bool haswell_get_pipe_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
@@ -10367,6 +10408,9 @@ static bool haswell_get_pipe_config(struct intel_crtc
*crtc,
pipe_config->pixel_multiplier = 1;
}
+ if (INTEL_GEN(dev_priv) >= 11)
+ icelake_get_trans_port_sync_config(crtc, pipe_config);
+
out:
for_each_power_domain(power_domain, power_domain_mask)
intel_display_power_put(dev_priv,
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
