On Thu, Jul 11, 2019 at 01:38:41PM +0300, Ville Syrjälä wrote:
> On Wed, Jul 10, 2019 at 02:39:50PM -0700, Manasi Navare wrote:
> > On ICL+, the vertical limits for the transcoders are increased to 8192 so
> > bump up
> > limits in intel_mode_valid()
> >
> > v3:
> > * Supported starting ICL (Ville)
> > * Use the higher limits from TRANS_VTOTAL register (Ville)
> > v2:
> > * Checkpatch warning (Manasi)
> >
> > Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
> > 1 file changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index f07081815b80..9883f607bb88 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
> > DRM_MODE_FLAG_CLKDIV2))
> > return MODE_BAD;
> >
> > - if (INTEL_GEN(dev_priv) >= 9 ||
> > - IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > + if (INTEL_GEN(dev_priv) >= 11) {
> > + hdisplay_max = 8192;
> > + vdisplay_max = 8192;
>
> The horiz limits should be 16k.
Oh yes didnt look at the TRANS_HTOTAL so yes thats 14 bits so 16384, will make
that change
Manasi
>
> > + htotal_max = 8192;
> > + vtotal_max = 8192;
> > + } else if (INTEL_GEN(dev_priv) >= 9 ||
> > + IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
> > vdisplay_max = 4096;
> > htotal_max = 8192;
> > --
> > 2.19.1
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
