On Thu, Jul 11, 2019 at 04:49:06PM +0000, Mun, Gwan-gyeong wrote:
> On Wed, 2019-07-10 at 15:58 +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > With 4:2:0 output the LS clock can be half of what it is with 4:4:4.
> > Make that happen.
> >
> > Cc: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_dp.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 0bdb7ecc5a81..1dfacf090fb8 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -1853,8 +1853,10 @@ intel_dp_compute_link_config_wide(struct
> > intel_dp *intel_dp,
> > int mode_rate, link_clock, link_avail;
> >
> > for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 *
> > 3) {
> > + int output_bpp = intel_dp_output_bpp(pipe_config, bpp);
> > +
> > mode_rate = intel_dp_link_required(adjusted_mode-
> > >crtc_clock,
> > - bpp);
> > + output_bpp);
> >
> > for (clock = limits->min_clock; clock <= limits-
> > >max_clock; clock++) {
> > for (lane_count = limits->min_lane_count;
> According to DP 1.4 spec section 1.7.1 [Makeup of the Main-Link],
> previous implementation worked by below explaination.
> After the stream data is packed and mapped to the Main-Link, the packed
> stream data rate shall be less than or equal to the Main-Link’s link
> symbol rate. When the packed stream data rate is less than the Main-
> Link’s link symbol rate, stuffing symbols are inserted.
>
> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
> Tested-by: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
Nice. Thanks for double checking. Pushed to dinq.
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
