On VLV, the Punit doesn't automatically drop the GPU to it's minimum voltage level when entering RC6, so we arm a timer to do it for us from the RPS interrupt handler. It'll generally only fire when we go idle (or if for some reason there's a long delay between RPS interrupts), but won't be re-armed again until the next RPS event, so shouldn't affect power consumption after we go idle and it triggers.
v2: use delayed work instead of timer + work queue combo (Ville) Signed-off-by: Jesse Barnes <[email protected]> --- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_irq.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_pm.c | 23 +++++++++++++++++++++++ 3 files changed, 36 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2557fc7..f563f25 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -660,6 +660,7 @@ struct i915_suspend_saved_registers { struct intel_gen6_power_mgmt { struct work_struct work; + struct delayed_work vlv_work; u32 pm_iir; /* lock - irqsave spinlock that protectects the work_struct and * pm_iir. */ @@ -670,6 +671,7 @@ struct intel_gen6_power_mgmt { u8 cur_delay; u8 min_delay; u8 max_delay; + u8 rpe_delay; u8 hw_max; struct delayed_work delayed_resume_work; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 932e7f8..af385e2 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -488,6 +488,17 @@ static void gen6_pm_rps_work(struct work_struct *work) gen6_set_rps(dev_priv->dev, new_delay); } + if (IS_VALLEYVIEW(dev_priv->dev)) { + /* + * On VLV, when we enter RC6 we may not be at the minimum + * voltage level, so arm a timer to check. It should only + * fire when there's activity or once after we've entered + * RC6, and then won't be re-armed until the next RPS interrupt. + */ + mod_delayed_work(dev_priv->wq, &dev_priv->rps.vlv_work, + jiffies + msecs_to_jiffies(100)); + } + mutex_unlock(&dev_priv->rps.hw_lock); } diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 2557926..4669d8c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2545,6 +2545,9 @@ static void gen6_disable_rps(struct drm_device *dev) spin_unlock_irq(&dev_priv->rps.lock); I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR)); + + if (IS_VALLEYVIEW(dev)) + cancel_delayed_work_sync(&dev_priv->rps.vlv_work); } int intel_enable_rc6(const struct drm_device *dev) @@ -2822,6 +2825,23 @@ int valleyview_rps_min_freq(struct drm_i915_private *dev_priv) return val & 0xff; } +static void vlv_rps_timer_work(struct delayed_work *work) +{ + drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, + rps.vlv_work); + + /* + * Timer fired, we must be idle. Drop to min voltage state. + * Note: we use RPe here since it should match the + * Vmin we were shooting for. That should give us better + * perf when we come back out of RC6 than if we used the + * min freq available. + */ + mutex_lock(&dev_priv->rps.hw_lock); + valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay); + mutex_unlock(&dev_priv->rps.hw_lock); +} + static void valleyview_enable_rps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2886,6 +2906,7 @@ static void valleyview_enable_rps(struct drm_device *dev) rpe = valleyview_rps_rpe_freq(dev_priv); DRM_DEBUG_DRIVER("RPe GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq, rpe)); + dev_priv->rps.rpe_delay = rpe; val = valleyview_rps_min_freq(dev_priv); DRM_DEBUG_DRIVER("min GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq, @@ -2895,6 +2916,8 @@ static void valleyview_enable_rps(struct drm_device *dev) DRM_DEBUG_DRIVER("setting GPU freq to %d\n", vlv_gpu_freq(dev_priv->mem_freq, rpe)); + INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); + valleyview_set_rps(dev_priv->dev, rpe); /* requires MSI enabled */ -- 1.7.10.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
