Commit f2db53f14d3d ("drm/i915: Replace "_load" with "_probe"
consequently") deliberately left the name of the module parameter
unchanged as that would require a corresponding change on IGT size.
Now as the IGT side change has been submitted, complete the switch to
the "probe" nomenclature.
Suggested-by: Joonas Lahtinen <joonas.lahti...@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzyszto...@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdec...@intel.com>
Cc: Michał Winiarski <michal.winiar...@intel.com>
Cc: Piotr Piórkowski <piotr.piorkow...@intel.com>
Cc: Tomasz Lis <tomasz....@intel.com>
Cc: Joonas Lahtinen <joonas.lahti...@linux.intel.com>
Reviewed-by: Chris Wilson <ch...@chris-wilson.co.uk>
---
drivers/gpu/drm/i915/i915_params.c | 2 +-
drivers/gpu/drm/i915/i915_params.h | 2 +-
drivers/gpu/drm/i915/i915_utils.c | 10 +++++-----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_params.c
b/drivers/gpu/drm/i915/i915_params.c
index 296452f9efe4..59a6586dae15 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -165,7 +165,7 @@ i915_param_named_unsafe(enable_dp_mst, bool, 0600,
"Enable multi-stream transport (MST) for new DisplayPort sinks.
(default: true)");
#if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
-i915_param_named_unsafe(inject_load_failure, uint, 0400,
+i915_param_named_unsafe(inject_probe_failure, uint, 0400,
"Force an error after a number of failure check points (0:disabled
(default), N:force failure at the Nth failure check point)");
#endif
diff --git a/drivers/gpu/drm/i915/i915_params.h
b/drivers/gpu/drm/i915/i915_params.h
index d29ade3b7de6..8c887413fc70 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -62,7 +62,7 @@ struct drm_printer;
param(int, mmio_debug, -IS_ENABLED(CONFIG_DRM_I915_DEBUG_MMIO)) \
param(int, edp_vswing, 0) \
param(int, reset, 2) \
- param(unsigned int, inject_load_failure, 0) \
+ param(unsigned int, inject_probe_failure, 0) \
param(int, fastboot, -1) \
param(int, enable_dpcd_backlight, 0) \
param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE) \
diff --git a/drivers/gpu/drm/i915/i915_utils.c
b/drivers/gpu/drm/i915/i915_utils.c
index e51bdb05da14..64affb87c284 100644
--- a/drivers/gpu/drm/i915/i915_utils.c
+++ b/drivers/gpu/drm/i915/i915_utils.c
@@ -57,22 +57,22 @@ static unsigned int i915_probe_fail_count;
int __i915_inject_probe_error(struct drm_i915_private *i915, int err,
const char *func, int line)
{
- if (i915_probe_fail_count >= i915_modparams.inject_load_failure)
+ if (i915_probe_fail_count >= i915_modparams.inject_probe_failure)
return 0;
- if (++i915_probe_fail_count < i915_modparams.inject_load_failure)
+ if (++i915_probe_fail_count < i915_modparams.inject_probe_failure)
return 0;
__i915_printk(i915, KERN_INFO,
"Injecting failure %d at checkpoint %u [%s:%d]\n",
- err, i915_modparams.inject_load_failure, func, line);
- i915_modparams.inject_load_failure = 0;
+ err, i915_modparams.inject_probe_failure, func, line);
+ i915_modparams.inject_probe_failure = 0;
return err;
}
bool i915_error_injected(void)
{
- return i915_probe_fail_count && !i915_modparams.inject_load_failure;
+ return i915_probe_fail_count && !i915_modparams.inject_probe_failure;
}
#endif
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
