Converts various instances of the printk based drm logging macros to use the struct drm_device logging macros. This also involves extracting the drm_i915_private device from intel types in some cases.
Note that this converts DRM_DEBUG_DRIVER() to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karu...@gmail.com> --- drivers/gpu/drm/i915/gt/intel_rc6.c | 35 ++++++++++++++++------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_rc6.c b/drivers/gpu/drm/i915/gt/intel_rc6.c index 66c07c32745c..50aa63270cdc 100644 --- a/drivers/gpu/drm/i915/gt/intel_rc6.c +++ b/drivers/gpu/drm/i915/gt/intel_rc6.c @@ -246,16 +246,18 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6) ret = sandybridge_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL); if (IS_GEN(i915, 6) && ret) { - DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n"); + drm_dbg(&i915->drm, "Couldn't check for BIOS workaround\n"); } else if (IS_GEN(i915, 6) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) { - DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n", - GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450); + drm_dbg(&i915->drm, + "You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n", + GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450); rc6vids &= 0xffff00; rc6vids |= GEN6_ENCODE_RC6_VID(450); ret = sandybridge_pcode_write(i915, GEN6_PCODE_WRITE_RC6VIDS, rc6vids); if (ret) - DRM_ERROR("Couldn't fix incorrect rc6 voltage\n"); + drm_err(&i915->drm, + "Couldn't fix incorrect rc6 voltage\n"); } } @@ -263,14 +265,15 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6) static int chv_rc6_init(struct intel_rc6 *rc6) { struct intel_uncore *uncore = rc6_to_uncore(rc6); + struct drm_i915_private *i915 = rc6_to_i915(rc6); resource_size_t pctx_paddr, paddr; resource_size_t pctx_size = 32 * SZ_1K; u32 pcbr; pcbr = intel_uncore_read(uncore, VLV_PCBR); if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) { - DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); - paddr = rc6_to_i915(rc6)->dsm.end + 1 - pctx_size; + drm_dbg(&i915->drm, "BIOS didn't set up PCBR, fixing up\n"); + paddr = i915->dsm.end + 1 - pctx_size; GEM_BUG_ON(paddr > U32_MAX); pctx_paddr = (paddr & ~4095); @@ -304,7 +307,7 @@ static int vlv_rc6_init(struct intel_rc6 *rc6) goto out; } - DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n"); + drm_dbg(&i915->drm, "BIOS didn't set up PCBR, fixing up\n"); /* * From the Gunit register HAS: @@ -316,7 +319,8 @@ static int vlv_rc6_init(struct intel_rc6 *rc6) */ pctx = i915_gem_object_create_stolen(i915, pctx_size); if (IS_ERR(pctx)) { - DRM_DEBUG("not enough stolen space for PCTX, disabling\n"); + drm_dbg(&i915->drm, + "not enough stolen space for PCTX, disabling\n"); return PTR_ERR(pctx); } @@ -398,14 +402,14 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6) rc_sw_target = intel_uncore_read(uncore, GEN6_RC_STATE); rc_sw_target &= RC_SW_TARGET_STATE_MASK; rc_sw_target >>= RC_SW_TARGET_STATE_SHIFT; - DRM_DEBUG_DRIVER("BIOS enabled RC states: " + drm_dbg(&i915->drm, "BIOS enabled RC states: " "HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n", onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE), onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE), rc_sw_target); if (!(intel_uncore_read(uncore, RC6_LOCATION) & RC6_CTX_IN_DRAM)) { - DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n"); + drm_dbg(&i915->drm, "RC6 Base location not set properly.\n"); enable_rc6 = false; } @@ -417,7 +421,7 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6) intel_uncore_read(uncore, RC6_CTX_BASE) & RC6_CTX_BASE_MASK; if (!(rc6_ctx_base >= i915->dsm_reserved.start && rc6_ctx_base + PAGE_SIZE < i915->dsm_reserved.end)) { - DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n"); + drm_dbg(&i915->drm, "RC6 Base address not as expected.\n"); enable_rc6 = false; } @@ -425,24 +429,25 @@ static bool bxt_check_bios_rc6_setup(struct intel_rc6 *rc6) (intel_uncore_read(uncore, PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1 && (intel_uncore_read(uncore, PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1 && (intel_uncore_read(uncore, PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1)) { - DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n"); + drm_dbg(&i915->drm, + "Engine Idle wait time not set properly.\n"); enable_rc6 = false; } if (!intel_uncore_read(uncore, GEN8_PUSHBUS_CONTROL) || !intel_uncore_read(uncore, GEN8_PUSHBUS_ENABLE) || !intel_uncore_read(uncore, GEN8_PUSHBUS_SHIFT)) { - DRM_DEBUG_DRIVER("Pushbus not setup properly.\n"); + drm_dbg(&i915->drm, "Pushbus not setup properly.\n"); enable_rc6 = false; } if (!intel_uncore_read(uncore, GEN6_GFXPAUSE)) { - DRM_DEBUG_DRIVER("GFX pause not setup properly.\n"); + drm_dbg(&i915->drm, "GFX pause not setup properly.\n"); enable_rc6 = false; } if (!intel_uncore_read(uncore, GEN8_MISC_CTRL0)) { - DRM_DEBUG_DRIVER("GPM control not setup properly.\n"); + drm_dbg(&i915->drm, "GPM control not setup properly.\n"); enable_rc6 = false; } -- 2.25.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
