On Tue, 2020-05-19 at 11:56 +0800, Lee Shawn C wrote:
> So far, max dot clock rate for MST mode rely on physcial
> bandwidth limitation. It would caused compatibility issue
> if source display resolution exceed MST hub output ability.
>
> For example, source DUT had DP 1.2 output capability.
> And MST docking just support HDMI 1.4 spec. When a HDMI 2.0
> monitor connected. Source would retrieve EDID from external
> and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps
> because it did not surpass DP physical bandwidth limitation.
> Do modeset to 4k@60fps, source output display data but MST
> docking can't output HDMI properly due to this resolution
> already over HDMI 1.4 spec.
>
> Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn
> instead of available_pbn for bandwidth checks").
> Source driver should refer to full_pbn to evaluate sink
> output capability. And filter out the resolution surpass
> sink output limitation.
>
> v2: Using mgr->base.lock to protect full_pbn.
> v3: Add ctx lock.
>
> Cc: Manasi Navare <manasi.d.nav...@intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Cooper Chiou <cooper.ch...@intel.com>
> Cc: Lyude Paul <ly...@redhat.com>
> Signed-off-by: Lee Shawn C <shawn.c....@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 30 ++++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 74559379384a..6b6f7eef5b68 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -611,6 +611,32 @@ static int intel_dp_mst_get_modes(struct drm_connector
> *connector)
> return intel_dp_mst_get_ddc_modes(connector);
> }
>
> +static bool
> +intel_dp_mst_mode_clock_exceed_pbn_bandwidth(struct drm_connector *connector,
> int clock, int bpp)
> +{
> + struct intel_connector *intel_connector = to_intel_connector(connector);
> + struct intel_dp *intel_dp = intel_connector->mst_port;
> + struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr;
> + struct drm_dp_mst_port *port = (to_intel_connector(connector))->port;
> + struct drm_modeset_acquire_ctx ctx;
> + bool ret = false;
> +
> + if (!mgr)
> + return ret;
> +
> + drm_modeset_acquire_init(&ctx, 0);
> +
> + drm_modeset_lock(&mgr->base.lock, &ctx);
> + if (port->full_pbn)
> + ret = (drm_dp_calc_pbn_mode(clock, bpp, false) > port-
> >full_pbn);
> + drm_modeset_unlock(&mgr->base.lock);
> +
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> +
> + return ret;
> +}
Sorry to do this, but this still isn't right :s, and will likely end up
deadlocking. I'm going to write up a fixed version of this patch and add you in
the Co-developed-by: tag, shouldn't take too long for me to do so I can send it
out today
> +
> static enum drm_mode_status
> intel_dp_mst_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> @@ -633,7 +659,9 @@ intel_dp_mst_mode_valid(struct drm_connector *connector,
> max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
> mode_rate = intel_dp_link_required(mode->clock, 18);
>
> - /* TODO - validate mode against available PBN for link */
> + if (intel_dp_mst_mode_clock_exceed_pbn_bandwidth(connector,
> mode->clock,
> 24))
> + return MODE_CLOCK_HIGH;
> +
> if (mode->clock < 10000)
> return MODE_CLOCK_LOW;
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
