Apparently Bspec is wrong in this case here even for gm45. Note that Bspec is horribly misguided on i965g/gm, so we don't have any other data points besides that it seems to make machines work better.
With this changes all the bits in PORT_HOTPLUG_STAT for the digital ports are ordered the same way. This seems to agree with what register dumps from the hpd storm handling code shows, where the LIVE bit and the short/long pulse STATUS bits light up at the same time with this enumeration (but no with the one from Bspec). Also tested on my gm45 which has two DP+ ports, and everything seems to still work as expected. References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html Cc: Egbert Eich <e...@suse.com> Cc: Jan Niggemann <j...@hz6.de> Tested-by: Jan Niggemann <j...@hz6.de> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch> --- drivers/gpu/drm/i915/i915_reg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 6caa748..2d4c884 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1925,9 +1925,9 @@ #define PORT_HOTPLUG_STAT (dev_priv->info->display_mmio_offset + 0x61114) /* HDMI/DP bits are gen4+ */ -#define PORTB_HOTPLUG_LIVE_STATUS (1 << 29) +#define PORTD_HOTPLUG_LIVE_STATUS (1 << 29) #define PORTC_HOTPLUG_LIVE_STATUS (1 << 28) -#define PORTD_HOTPLUG_LIVE_STATUS (1 << 27) +#define PORTB_HOTPLUG_LIVE_STATUS (1 << 27) #define PORTD_HOTPLUG_INT_STATUS (3 << 21) #define PORTC_HOTPLUG_INT_STATUS (3 << 19) #define PORTB_HOTPLUG_INT_STATUS (3 << 17) -- 1.8.3.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
