On 08/01/2013 05:07 PM, Aaron Lu wrote: > On 08/01/2013 04:12 PM, Borislav Petkov wrote: >> On Thu, Aug 01, 2013 at 09:13:35AM +0800, Aaron Lu wrote: >>> Can you please run acpi_listen and then press the Fn-Fx key, see if the >>> events are correctly sent out? >> >> Like this? >> >> # acpi_listen >> video/brightnessdown BRTDN 00000087 00000000 >> video/brightnessup BRTUP 00000086 00000000 >> video/brightnessdown BRTDN 00000087 00000000 >> video/brightnessup BRTUP 00000086 00000000 >> video/brightnessdown BRTDN 00000087 00000000 >> video/brightnessup BRTUP 00000086 00000000 >> video/brightnessdown BRTDN 00000087 00000000 >> video/brightnessup BRTUP 00000086 00000000 >> video/brightnessdown BRTDN 00000087 00000000 >> ^C > > Yes, so the event is correctly sent out. > >> >>> From the bug page: >>> https://bugzilla.kernel.org/show_bug.cgi?id=51231#c80 >>> I got the impression that both the acpi_video interface and the vendor >>> interface thinkpad_screen are broken. So adding this cmdline here works >>> suggests that either thinkpad_screen works or thinkpad vendor driver >>> doesn't get loaded or doesn't create that interface for some reason. >>> >>> Alternatively, if the intel_backlight interface works(highly possible), >>> you can use xorg.conf to specify the that backlight interface for X. >>> >>> Section "Device" >>> Option "Backlight" "intel_backlight" >>> Identifier "Card0" >>> Driver "intel" >>> BusID "PCI:0:2:0" >>> EndSection >> >> Yeah, that didn't work *but* manually writing to both: >> >> /sys/class/backlight/acpi_video0/brightness >> >> and >> >> /sys/class/backlight/intel_backlight/brightness >> >> works. > > Err...we have the event sent out on hotkey press and the interface also > works, but still, using hotkey to adjust brightness level is broken... > > I just found an old acer laptop that has similar issue(or even worse: on > X starts, an almost black screen is shown and hotkey adjust doesn't > work), I'll look into this.
Hi Jani & Daniel, It turned out there is an integer overflow problem, and the below patch fixed this problem on Acer Aspire 4732Z and thinkpad R61i. From: Aaron Lu <aaron...@intel.com> Subject: [PATCH] drm/i915: avoid brightness overflow when doing scale Some card's max brightness level is pretty large, e.g. on Acer Aspire 4732Z, the max level is 989910. If user space set a large enough level then the current scale done in intel_panel_set_backlight will cause an integer overflow and the scaled level will be mistakenly small, leaving user with an almost black screen. This patch fixes this problem. Signed-off-by: Aaron Lu <aaron...@intel.com> --- Since the only external user of intel_panel_set_backlight is operation region code where the max will be a constant of 255, this patch fixes the problem by comparing freq and max and then do things accordingly instead of converting to 64 bits. drivers/gpu/drm/i915/intel_panel.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 67e2c1f..7c674f0 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -498,7 +498,10 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level, u32 max) } /* scale to hardware */ - level = level * freq / max; + if (freq < max) + level = level * freq / max; + else + level = freq / max * level; dev_priv->backlight.level = level; if (dev_priv->backlight.device) -- 1.8.3.1 Hi Boris, Since the sysfs interface works on your system, I think your problem should be different. Can you please file a bug for this? I can provide you with a debug patch and then see what happened. Please attach acpidump when filing the bug. https://bugzilla.kernel.org, ACPI/Power-Video. Thanks, Aaron > >> >> The ranges are different, though: >> >> intel_backlight/actual_brightness:1000 >> intel_backlight/bl_power:0 >> intel_backlight/brightness:1000 >> intel_backlight/max_brightness:4437 >> intel_backlight/type:raw >> >> acpi_video0/actual_brightness:41 >> acpi_video0/bl_power:0 >> acpi_video0/brightness:41 >> acpi_video0/max_brightness:100 >> acpi_video0/type:firmware > > Yes, different interface has different brightness ranges and a value in > one range may turn out to be the same actual brightness level of another > value in another range. > >> >> I guess I need to write me a dirty script for now ... :-) > > :-) > >> >> Thanks guys. >> > Thanks, > Aaron > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx