On Tue, Nov 03, 2020 at 08:58:28PM +0530, Uma Shankar wrote:
> Enable Colorspace as BT2020 if driving HDR content.Sending Colorimetry
> data for HDR using AVI infoframe. LSPCON firmware expects this and though
> SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
> which transfers the same to HDMI sink.
>
> v2: Dropped state managed in drm core as per Jani Nikula's suggestion.
>
> v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
> as suggested by Ville.
>
> Signed-off-by: Uma Shankar <uma.shan...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_lspcon.c | 31 +++++++++++++++++----
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c
> b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 336494b60d11..19831f5e51bf 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -524,12 +524,31 @@ void lspcon_set_infoframes(struct intel_encoder
> *encoder,
> else
> frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>
> - drm_hdmi_avi_infoframe_quant_range(&frame.avi,
> - conn_state->connector,
> - adjusted_mode,
> - crtc_state->limited_color_range ?
> - HDMI_QUANTIZATION_RANGE_LIMITED :
> - HDMI_QUANTIZATION_RANGE_FULL);
> + /*
> + * Set the HDMI Colorspace which are supported by DP as well.
> + * For all others (3 combinations which are exclusive for DP),
> + * Let the colorspace be set to default i.e No Data.
> + * Fixme: Expose HDMI colorspaces for instead of DP counterparts
> + */
> + drm_hdmi_avi_infoframe_colorspace(&frame.avi, conn_state);
I would suggest taking care of that FIXME + adding this in the same
patch.
> +
> + /* nonsense combination */
> + drm_WARN_ON(encoder->base.dev, crtc_state->limited_color_range &&
> + crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB);
> +
> + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB) {
> + drm_hdmi_avi_infoframe_quant_range(&frame.avi,
> + conn_state->connector,
> + adjusted_mode,
> +
> crtc_state->limited_color_range ?
> +
> HDMI_QUANTIZATION_RANGE_LIMITED :
> +
> HDMI_QUANTIZATION_RANGE_FULL);
> + } else {
> + frame.avi.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
> + frame.avi.ycc_quantization_range =
> HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
> + }
This part looks like it should be a separate patch.
> +
> + drm_hdmi_avi_infoframe_content_type(&frame.avi, conn_state);
And that one looks like it should be part of the patch that adds the
corresponding property.
>
> ret = hdmi_infoframe_pack(&frame, buf, sizeof(buf));
> if (ret < 0) {
> --
> 2.26.2
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
