On Fri, 11 Dec 2020, Dave Airlie <airl...@gmail.com> wrote:
> From: Dave Airlie <airl...@redhat.com>
>
> Daniel asked for this, but it's a bit messy and I'm not sure
> how best to clean it up yet.
Cleaned it up some locally by moving both hsw and bdw buf trans tables
to intel_fdi.c, and adding a function to get them.
Surely this could be improved further, but I think it's forward
progress.
BR,
Jani.
>
> Signed-off-by: Dave Airlie <airl...@redhat.com>
> ---
> drivers/gpu/drm/i915/display/intel_crt.c | 1 +
> drivers/gpu/drm/i915/display/intel_ddi.c | 151 +----------------------
> drivers/gpu/drm/i915/display/intel_ddi.h | 14 ++-
> drivers/gpu/drm/i915/display/intel_fdi.c | 147 ++++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_fdi.h | 3 +
> 5 files changed, 168 insertions(+), 148 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crt.c
> b/drivers/gpu/drm/i915/display/intel_crt.c
> index 4934edd51cb0..077ebc7e6396 100644
> --- a/drivers/gpu/drm/i915/display/intel_crt.c
> +++ b/drivers/gpu/drm/i915/display/intel_crt.c
> @@ -38,6 +38,7 @@
> #include "intel_crt.h"
> #include "intel_ddi.h"
> #include "intel_display_types.h"
> +#include "intel_fdi.h"
> #include "intel_fifo_underrun.h"
> #include "intel_gmbus.h"
> #include "intel_hotplug.h"
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 6863236df1d0..2d903962f9dd 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -51,12 +51,6 @@
> #include "intel_tc.h"
> #include "intel_vdsc.h"
>
> -struct ddi_buf_trans {
> - u32 trans1; /* balance leg enable, de-emph level */
> - u32 trans2; /* vref sel, vswing */
> - u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */
> -};
> -
> static const u8 index_to_dp_signal_levels[] = {
> [0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0,
> [1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1,
> @@ -1398,8 +1392,8 @@ static int intel_ddi_hdmi_level(struct intel_encoder
> *encoder,
> * values in advance. This function programs the correct values for
> * DP/eDP/FDI use cases.
> */
> -static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
> - const struct intel_crtc_state
> *crtc_state)
> +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> u32 iboost_bit = 0;
> @@ -1461,8 +1455,8 @@ static void intel_prepare_hdmi_ddi_buffers(struct
> intel_encoder *encoder,
> ddi_translations[level].trans2);
> }
>
> -static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> - enum port port)
> +void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> + enum port port)
> {
> if (IS_BROXTON(dev_priv)) {
> udelay(16);
> @@ -1490,7 +1484,7 @@ static void intel_wait_ddi_buf_active(struct
> drm_i915_private *dev_priv,
> port_name(port));
> }
>
> -static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> +u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> {
> switch (pll->info->id) {
> case DPLL_ID_WRPLL1:
> @@ -1550,141 +1544,6 @@ static u32 icl_pll_to_ddi_clk_sel(struct
> intel_encoder *encoder,
> }
> }
>
> -/* Starting with Haswell, different DDI ports can work in FDI mode for
> - * connection to the PCH-located connectors. For this, it is necessary to
> train
> - * both the DDI port and PCH receiver for the desired DDI buffer settings.
> - *
> - * The recommended port to work in FDI mode is DDI E, which we use here.
> Also,
> - * please note that when FDI mode is active on DDI E, it shares 2 lines with
> - * DDI A (which is used for eDP)
> - */
> -
> -void hsw_fdi_link_train(struct intel_encoder *encoder,
> - const struct intel_crtc_state *crtc_state)
> -{
> - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> - u32 temp, i, rx_ctl_val, ddi_pll_sel;
> -
> - intel_prepare_dp_ddi_buffers(encoder, crtc_state);
> -
> - /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
> - * mode set "sequence for CRT port" document:
> - * - TP1 to TP2 time with the default value
> - * - FDI delay to 90h
> - *
> - * WaFDIAutoLinkSetTimingOverrride:hsw
> - */
> - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A),
> - FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) |
> FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
> -
> - /* Enable the PCH Receiver FDI PLL */
> - rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
> - FDI_RX_PLL_ENABLE |
> - FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
> - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> - udelay(220);
> -
> - /* Switch from Rawclk to PCDclk */
> - rx_ctl_val |= FDI_PCDCLK;
> - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> -
> - /* Configure Port Clock Select */
> - ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
> - intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel);
> - drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL);
> -
> - /* Start the training iterating through available voltages and emphasis,
> - * testing each value twice. */
> - for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) {
> - /* Configure DP_TP_CTL with auto-training */
> - intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
> - DP_TP_CTL_FDI_AUTOTRAIN |
> - DP_TP_CTL_ENHANCED_FRAME_ENABLE |
> - DP_TP_CTL_LINK_TRAIN_PAT1 |
> - DP_TP_CTL_ENABLE);
> -
> - /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
> - * DDI E does not support port reversal, the functionality is
> - * achieved on the PCH side in FDI_RX_CTL, so no need to set the
> - * port reversal bit */
> - intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E),
> - DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes -
> 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2));
> - intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
> -
> - udelay(600);
> -
> - /* Program PCH FDI Receiver TU */
> - intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
> -
> - /* Enable PCH FDI Receiver with auto-training */
> - rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
> - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> -
> - /* Wait for FDI receiver lane calibration */
> - udelay(30);
> -
> - /* Unset FDI_RX_MISC pwrdn lanes */
> - temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
> - temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
> - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
> - intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
> -
> - /* Wait for FDI auto training time */
> - udelay(5);
> -
> - temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
> - if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
> - drm_dbg_kms(&dev_priv->drm,
> - "FDI link training done on step %d\n", i);
> - break;
> - }
> -
> - /*
> - * Leave things enabled even if we failed to train FDI.
> - * Results in less fireworks from the state checker.
> - */
> - if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
> - drm_err(&dev_priv->drm, "FDI link training failed!\n");
> - break;
> - }
> -
> - rx_ctl_val &= ~FDI_RX_ENABLE;
> - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> -
> - temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E));
> - temp &= ~DDI_BUF_CTL_ENABLE;
> - intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp);
> - intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
> -
> - /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
> - temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E));
> - temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> - temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
> - intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp);
> - intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
> -
> - intel_wait_ddi_buf_idle(dev_priv, PORT_E);
> -
> - /* Reset FDI_RX_MISC pwrdn lanes */
> - temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
> - temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
> - temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
> - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
> - intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
> - }
> -
> - /* Enable normal pixel sending for FDI */
> - intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
> - DP_TP_CTL_FDI_AUTOTRAIN |
> - DP_TP_CTL_LINK_TRAIN_NORMAL |
> - DP_TP_CTL_ENHANCED_FRAME_ENABLE |
> - DP_TP_CTL_ENABLE);
> -}
> -
> static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state)
> {
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.h
> b/drivers/gpu/drm/i915/display/intel_ddi.h
> index dcc711cfe4fe..e42b6bd05e01 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.h
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.h
> @@ -9,6 +9,12 @@
> #include "intel_display.h"
> #include "i915_reg.h"
>
> +struct ddi_buf_trans {
> + u32 trans1; /* balance leg enable, de-emph level */
> + u32 trans2; /* vref sel, vswing */
> + u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */
> +};
> +
> struct drm_connector_state;
> struct drm_i915_private;
> struct intel_connector;
> @@ -17,6 +23,7 @@ struct intel_crtc_state;
> struct intel_dp;
> struct intel_dpll_hw_state;
> struct intel_encoder;
> +struct intel_shared_dpll;
> enum transcoder;
>
> i915_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder,
> @@ -27,8 +34,11 @@ void intel_ddi_fdi_post_disable(struct intel_atomic_state
> *state,
> struct intel_encoder *intel_encoder,
> const struct intel_crtc_state *old_crtc_state,
> const struct drm_connector_state
> *old_conn_state);
> -void hsw_fdi_link_train(struct intel_encoder *encoder,
> - const struct intel_crtc_state *crtc_state);
> +u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll);
> +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state);
> +void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> + enum port port);
> void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
> bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
> void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
> diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c
> b/drivers/gpu/drm/i915/display/intel_fdi.c
> index b2eb96ae10a2..0a97f9864e1c 100644
> --- a/drivers/gpu/drm/i915/display/intel_fdi.c
> +++ b/drivers/gpu/drm/i915/display/intel_fdi.c
> @@ -5,6 +5,19 @@
> #include "intel_atomic.h"
> #include "intel_display_types.h"
> #include "intel_fdi.h"
> +#include "intel_ddi.h"
> +
> +static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = {
> + { 0x00FFFFFF, 0x0007000E, 0x0 },
> + { 0x00D75FFF, 0x000F000A, 0x0 },
> + { 0x00C30FFF, 0x00060006, 0x0 },
> + { 0x00AAAFFF, 0x001E0000, 0x0 },
> + { 0x00FFFFFF, 0x000F000A, 0x0 },
> + { 0x00D75FFF, 0x00160004, 0x0 },
> + { 0x00C30FFF, 0x001E0000, 0x0 },
> + { 0x00FFFFFF, 0x00060006, 0x0 },
> + { 0x00D75FFF, 0x001E0000, 0x0 },
> +};
>
> /* units of 100MHz */
> static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
> @@ -550,6 +563,140 @@ static void ivb_manual_fdi_link_train(struct intel_crtc
> *crtc,
> drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
> }
>
> +/* Starting with Haswell, different DDI ports can work in FDI mode for
> + * connection to the PCH-located connectors. For this, it is necessary to
> train
> + * both the DDI port and PCH receiver for the desired DDI buffer settings.
> + *
> + * The recommended port to work in FDI mode is DDI E, which we use here.
> Also,
> + * please note that when FDI mode is active on DDI E, it shares 2 lines with
> + * DDI A (which is used for eDP)
> + */
> +void hsw_fdi_link_train(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + u32 temp, i, rx_ctl_val, ddi_pll_sel;
> +
> + intel_prepare_dp_ddi_buffers(encoder, crtc_state);
> +
> + /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
> + * mode set "sequence for CRT port" document:
> + * - TP1 to TP2 time with the default value
> + * - FDI delay to 90h
> + *
> + * WaFDIAutoLinkSetTimingOverrride:hsw
> + */
> + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A),
> + FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) |
> FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
> +
> + /* Enable the PCH Receiver FDI PLL */
> + rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
> + FDI_RX_PLL_ENABLE |
> + FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
> + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> + udelay(220);
> +
> + /* Switch from Rawclk to PCDclk */
> + rx_ctl_val |= FDI_PCDCLK;
> + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> +
> + /* Configure Port Clock Select */
> + ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
> + intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel);
> + drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL);
> +
> + /* Start the training iterating through available voltages and emphasis,
> + * testing each value twice. */
> + for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) {
> + /* Configure DP_TP_CTL with auto-training */
> + intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
> + DP_TP_CTL_FDI_AUTOTRAIN |
> + DP_TP_CTL_ENHANCED_FRAME_ENABLE |
> + DP_TP_CTL_LINK_TRAIN_PAT1 |
> + DP_TP_CTL_ENABLE);
> +
> + /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
> + * DDI E does not support port reversal, the functionality is
> + * achieved on the PCH side in FDI_RX_CTL, so no need to set the
> + * port reversal bit */
> + intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E),
> + DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes -
> 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2));
> + intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
> +
> + udelay(600);
> +
> + /* Program PCH FDI Receiver TU */
> + intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
> +
> + /* Enable PCH FDI Receiver with auto-training */
> + rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
> + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> +
> + /* Wait for FDI receiver lane calibration */
> + udelay(30);
> +
> + /* Unset FDI_RX_MISC pwrdn lanes */
> + temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
> + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
> + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
> + intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
> +
> + /* Wait for FDI auto training time */
> + udelay(5);
> +
> + temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
> + if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
> + drm_dbg_kms(&dev_priv->drm,
> + "FDI link training done on step %d\n", i);
> + break;
> + }
> +
> + /*
> + * Leave things enabled even if we failed to train FDI.
> + * Results in less fireworks from the state checker.
> + */
> + if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
> + drm_err(&dev_priv->drm, "FDI link training failed!\n");
> + break;
> + }
> +
> + rx_ctl_val &= ~FDI_RX_ENABLE;
> + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
> + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
> +
> + temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E));
> + temp &= ~DDI_BUF_CTL_ENABLE;
> + intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp);
> + intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
> +
> + /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
> + temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E));
> + temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> + temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
> + intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp);
> + intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
> +
> + intel_wait_ddi_buf_idle(dev_priv, PORT_E);
> +
> + /* Reset FDI_RX_MISC pwrdn lanes */
> + temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A));
> + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
> + temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
> + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp);
> + intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
> + }
> +
> + /* Enable normal pixel sending for FDI */
> + intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
> + DP_TP_CTL_FDI_AUTOTRAIN |
> + DP_TP_CTL_LINK_TRAIN_NORMAL |
> + DP_TP_CTL_ENHANCED_FRAME_ENABLE |
> + DP_TP_CTL_ENABLE);
> +}
> +
> void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
> {
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
> diff --git a/drivers/gpu/drm/i915/display/intel_fdi.h
> b/drivers/gpu/drm/i915/display/intel_fdi.h
> index 7441fb1ce370..3b8bab236bd7 100644
> --- a/drivers/gpu/drm/i915/display/intel_fdi.h
> +++ b/drivers/gpu/drm/i915/display/intel_fdi.h
> @@ -8,6 +8,7 @@
>
> struct intel_crtc;
> struct intel_crtc_state;
> +struct intel_encoder;
>
> #define I915_DISPLAY_CONFIG_RETRY 1
> int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
> @@ -17,5 +18,7 @@ void ilk_fdi_disable(struct intel_crtc *crtc);
> void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc);
> void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state);
> void intel_fdi_init_hook(struct drm_i915_private *dev_priv);
> +void hsw_fdi_link_train(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state);
>
> #endif
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
