> -----Original Message----- > From: Nautiyal, Ankit K <ankit.k.nauti...@intel.com> > Sent: Wednesday, December 23, 2020 11:27 AM > To: Jani Nikula <jani.nik...@linux.intel.com>; Sharma, Swati2 > <swati2.sha...@intel.com>; Shankar, Uma <uma.shan...@intel.com> > Cc: intel-gfx@lists.freedesktop.org > Subject: Re: [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Add support for DP- > HDMI2.1 PCON (rev9) > > Hi Jani, > > I apologize to miss these checkpatch errors. I mistakenly used some older > version > of checkpatch script and couldn't get these. > > Nevertheless I should have taken care of the warnings from the patchwork. I > fully > understand that onus is on the submitter of the series to fix all such > warnings > and checks, and I take full responsibility of this mistake. > > Thank you for fixing these issues this time, and I assure you that I will > take care > in future and make sure that the checkpatch warnings are addressed. > > Once again I apologize for the fault.
I also should have checked this, will be more careful to ensure this remains the top item in the checklist along with CI results. Regards, Uma Shankar > > Thanks & Regards, > > Ankit > > > On 12/22/2020 10:13 PM, Jani Nikula wrote: > > On Fri, 18 Dec 2020, Patchwork <patchw...@emeril.freedesktop.org> wrote: > >> == Series Details == > >> > >> Series: Add support for DP-HDMI2.1 PCON (rev9) > >> URL : https://patchwork.freedesktop.org/series/82098/ > >> State : warning > >> > >> == Summary == > >> > > All - > > > > I've fixed most of the checkpatch warnings (save for LONG_LINE and > > BIT_MACRO that we don't care so much about) while applying. It's not > > something I normally do, and I really don't want to find these when > > the series is at v7 and the same warnings have been there since > > September and I keep being pinged about merging. > > > > Keeping the driver nice and clean is your job too, not just mine. > > > > BR, > > Jani. > > > > > >> $ dim checkpatch origin/drm-tip > >> 26eb0c2f2ee1 drm/edid: Add additional HFVSDB fields for HDMI2.1 > >> -:61: WARNING:FROM_SIGN_OFF_MISMATCH: From:/Signed-off-by: email > name mismatch: 'From: Swati Sharma <swati2.sha...@intel.com>' != 'Signed-off- > by: Sharma, Swati2 <swati2.sha...@intel.com>' > >> > >> total: 0 errors, 1 warnings, 0 checks, 36 lines checked 13ffe829d77e > >> drm/edid: Parse MAX_FRL field from HFVSDB block > >> -:73: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #73: FILE: drivers/gpu/drm/drm_edid.c:4948: > >> + drm_get_max_frl_rate(max_frl_rate, &hdmi->max_lanes, > >> + &hdmi->max_frl_rate_per_lane); > >> > >> -:95: WARNING:FROM_SIGN_OFF_MISMATCH: From:/Signed-off-by: email > name mismatch: 'From: Swati Sharma <swati2.sha...@intel.com>' != 'Signed-off- > by: Sharma, Swati2 <swati2.sha...@intel.com>' > >> > >> total: 0 errors, 1 warnings, 1 checks, 68 lines checked > >> 89853c019e04 drm/edid: Parse DSC1.2 cap fields from HFVSDB block > >> -:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #51: FILE: drivers/gpu/drm/drm_edid.c:4969: > >> + drm_get_max_frl_rate(dsc_max_frl_rate, &hdmi_dsc- > >max_lanes, > >> + &hdmi_dsc->max_frl_rate_per_lane); > >> > >> -:52: WARNING:LONG_LINE: line length of 101 exceeds 100 columns > >> #52: FILE: drivers/gpu/drm/drm_edid.c:4970: > >> + hdmi_dsc->total_chunk_kbytes = hf_vsdb[13] & > >> +DRM_EDID_DSC_TOTAL_CHUNK_KBYTES; > >> > >> total: 0 errors, 1 warnings, 1 checks, 125 lines checked > >> 5120b1727391 drm/dp_helper: Add Helpers for FRL Link Training support > >> for DP-HDMI2.1 PCON > >> c68914ce7b67 drm/dp_helper: Add support for link failure detection > >> -:112: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #112: FILE: include/drm/drm_dp_helper.h:2055: > >> +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, > >> + struct drm_connector *connector); > >> > >> total: 0 errors, 0 warnings, 1 checks, 76 lines checked > >> 2f4d3c12ee27 drm/dp_helper: Add support for Configuring DSC for > >> HDMI2.1 Pcon > >> -:15: WARNING:TYPO_SPELLING: 'Convertor' may be misspelled - perhaps > 'Converter'? > >> #15: > >> v3: Only setting the DSC bits for the Protocol Convertor control > >> > >> -:165: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ > >> on a separate line > >> #165: FILE: drivers/gpu/drm/drm_dp_helper.c:3037: > >> + * */ > >> > >> -:185: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ > >> on a separate line > >> #185: FILE: drivers/gpu/drm/drm_dp_helper.c:3057: > >> + * */ > >> > >> -:210: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ > >> on a separate line > >> #210: FILE: drivers/gpu/drm/drm_dp_helper.c:3082: > >> + * */ > >> > >> total: 0 errors, 4 warnings, 0 checks, 343 lines checked > >> d1464a87a5a8 drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr > >> Conversion > >> -:18: WARNING:TYPO_SPELLING: 'accomodate' may be misspelled - perhaps > 'accommodate'? > >> #18: > >> -Modified the color-conversion cap helper function, to accomodate > >> > >> total: 0 errors, 1 warnings, 0 checks, 106 lines checked > >> 29e16a799211 drm/i915: Capture max frl rate for PCON in dfp cap > >> structure > >> -:13: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit > >> description (prefer a maximum 75 chars per line) > >> #13: > >> -tweaked the comparison of target bw and pcon frl bw to avoid roundup > errors. > >> > >> total: 0 errors, 1 warnings, 0 checks, 60 lines checked > >> 0f68d7283295 drm/i915: Add support for starting FRL training for > >> HDMI2.1 via PCON > >> -:86: CHECK:BRACES: Blank lines aren't necessary after an open brace '{' > >> #86: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4005: > >> +{ > >> + > >> > >> -:147: WARNING:LONG_LINE: line length of 101 exceeds 100 columns > >> #147: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4066: > >> + wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == > >> +true, TIMEOUT_FRL_READY_MS); > >> > >> -:166: WARNING:LONG_LINE: line length of 112 exceeds 100 columns > >> #166: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4085: > >> + wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) > >> +== true, TIMEOUT_HDMI_LINK_ACTIVE_MS); > >> > >> -:172: WARNING:LONG_LINE: line length of 101 exceeds 100 columns > >> #172: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4091: > >> + if (DP_PCON_HDMI_MODE_FRL != > >> +drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) { > >> > >> -:172: WARNING:CONSTANT_COMPARISON: Comparisons should place the > >> constant on the right side of the test > >> #172: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4091: > >> + if (DP_PCON_HDMI_MODE_FRL != > >> +drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) { > >> > >> -:176: WARNING:LONG_LINE: line length of 109 exceeds 100 columns > >> #176: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4095: > >> + drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK = > %u\n", > >> +max_frl_bw_mask, frl_trained_mask); > >> > >> total: 0 errors, 5 warnings, 1 checks, 194 lines checked > >> 3793f5252161 drm/i915: Check for FRL training before DP Link training > >> 126578f6fe39 drm/i915: Add support for enabling link status and > >> recovery > >> -:54: WARNING:LONG_LINE: line length of 107 exceeds 100 columns > >> #54: FILE: drivers/gpu/drm/i915/display/intel_dp.c:6031: > >> + drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, > >> +&intel_dp->attached_connector->base); > >> > >> total: 0 errors, 1 warnings, 0 checks, 83 lines checked ca5d8df43ceb > >> drm/i915: Read DSC capabilities of the HDMI2.1 PCON encoder > >> -:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #51: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4000: > >> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER, > >> + intel_dp->pcon_dsc_dpcd, > >> > >> -:57: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #57: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4006: > >> + drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n", > >> + (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp- > >pcon_dsc_dpcd); > >> > >> total: 0 errors, 0 warnings, 2 checks, 39 lines checked 35f69a655bad > >> drm/i915: Add helper functions for calculating DSC parameters for > >> HDMI2.1 > >> -:57: WARNING:TYPO_SPELLING: 'capabilites' may be misspelled - perhaps > 'capabilities'? > >> #57: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3458: > >> + * and dsc decoder capabilites > >> > >> -:143: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #143: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3544: > >> + if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices > >= 1) > >> + target_slices = 1; > >> > >> -:145: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #145: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3546: > >> + else if (min_slices <= 2 && src_max_slices >= 2 && > hdmi_max_slices >= 2) > >> + target_slices = 2; > >> > >> -:147: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #147: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3548: > >> + else if (min_slices <= 4 && src_max_slices >= 4 && > hdmi_max_slices >= 4) > >> + target_slices = 4; > >> > >> -:149: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #149: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3550: > >> + else if (min_slices <= 8 && src_max_slices >= 8 && > hdmi_max_slices >= 8) > >> + target_slices = 8; > >> > >> -:151: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #151: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3552: > >> + else if (min_slices <= 12 && src_max_slices >= 12 && > hdmi_max_slices >= 12) > >> + target_slices = 12; > >> > >> -:153: WARNING:SUSPECT_CODE_INDENT: suspect code indent for > >> conditional statements (16, 23) > >> #153: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3554: > >> + else if (min_slices <= 16 && src_max_slices >= 16 && > hdmi_max_slices >= 16) > >> + target_slices = 16; > >> > >> total: 0 errors, 7 warnings, 0 checks, 248 lines checked 34ee9dfdadfd > >> drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding > >> -:75: CHECK:BRACES: Blank lines aren't necessary after an open brace '{' > >> #75: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4171: > >> +{ > >> + > >> > >> -:92: CHECK:LINE_SPACING: Please don't use multiple blank lines > >> #92: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4188: > >> + > >> + > >> > >> -:155: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #155: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4251: > >> + bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, > >> + num_slices, slice_width); > >> > >> total: 0 errors, 0 warnings, 3 checks, 157 lines checked d739034947bb > >> drm/i915/display: Let PCON convert from RGB to YCbCr if it can > >> -:104: WARNING:LONG_LINE: line length of 101 exceeds 100 columns > >> #104: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4368: > >> + > DP_DS_HDMI_BT2020_RGB_YCBCR_CONV); > >> > >> -:156: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open > >> parenthesis > >> #156: FILE: drivers/gpu/drm/i915/display/intel_dp.c:6922: > >> + rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp- > >dpcd, > >> + intel_dp- > >downstream_ports, > >> > >> total: 0 errors, 1 warnings, 1 checks, 152 lines checked > >> > >> > >> _______________________________________________ > >> Intel-gfx mailing list > >> Intel-gfx@lists.freedesktop.org > >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
