Since GPIOs are optional we don't need to repeat checks that are done
in the GPIO API. Remove them for good.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Acked-by: Linus Walleij <linus.wall...@linaro.org>
---
 drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c 
b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
index 7d012db6352b..3dab94463656 100644
--- a/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
+++ b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c
@@ -518,11 +518,9 @@ void tc35876x_toshiba_bridge_panel_off(struct drm_device 
*dev)
 
        dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
 
-       if (bridge_bl_enable)
-               gpiod_set_value_cansleep(bridge_bl_enable, 0);
+       gpiod_set_value_cansleep(bridge_bl_enable, 0);
 
-       if (backlight_voltage)
-               gpiod_set_value_cansleep(backlight_voltage, 0);
+       gpiod_set_value_cansleep(backlight_voltage, 0);
 }
 
 void tc35876x_toshiba_bridge_panel_on(struct drm_device *dev)
@@ -567,8 +565,7 @@ void tc35876x_toshiba_bridge_panel_on(struct drm_device 
*dev)
                                "i2c write failed (%d)\n", ret);
        }
 
-       if (bridge_bl_enable)
-               gpiod_set_value_cansleep(bridge_bl_enable, 1);
+       gpiod_set_value_cansleep(bridge_bl_enable, 1);
 
        tc35876x_brightness_control(dev, dev_priv->brightness_adjusted);
 }
@@ -642,20 +639,17 @@ static int tc35876x_bridge_probe(struct i2c_client 
*client,
        bridge_reset = devm_gpiod_get_optional(&client->dev, "bridge-reset", 
GPIOD_OUT_LOW);
        if (IS_ERR(bridge_reset))
                return PTR_ERR(bridge_reset);
-       if (bridge_reset)
-               gpiod_set_consumer_name(bridge_reset, "tc35876x bridge reset");
+       gpiod_set_consumer_name(bridge_reset, "tc35876x bridge reset");
 
        bridge_bl_enable = devm_gpiod_get_optional(&client->dev, "bl-en", 
GPIOD_OUT_LOW);
        if (IS_ERR(bridge_bl_enable))
                return PTR_ERR(bridge_bl_enable);
-       if (bridge_bl_enable)
-               gpiod_set_consumer_name(bridge_bl_enable, "tc35876x panel bl 
en");
+       gpiod_set_consumer_name(bridge_bl_enable, "tc35876x panel bl en");
 
        backlight_voltage = devm_gpiod_get_optional(&client->dev, "vadd", 
GPIOD_OUT_LOW);
        if (IS_ERR(backlight_voltage))
                return PTR_ERR(backlight_voltage);
-       if (backlight_voltage)
-               gpiod_set_consumer_name(backlight_voltage, "tc35876x panel 
vadd");
+       gpiod_set_consumer_name(backlight_voltage, "tc35876x panel vadd");
 
        tc35876x_client = client;
 
-- 
2.29.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to