From: Ville Syrjälä <ville.syrj...@linux.intel.com>

While running "gem_exec_big --r single" from igt-gpu-tools on
Geminilake as soon as a 2M mapping is made I tend to get a DMAR
write fault. Strangely the faulting address is always a 4K page
and usually very far away from the 2M page that got mapped.
But if no 2M mappings get used I can't reproduce the fault.

I also tried to dump the PTE for the faulting address but it actually
looks correct to me (ie. definitely seems to have the write bit set):
 DMAR: DRHD: handling fault status reg 2
 DMAR: [DMA Write] Request device [00:02.0] PASID ffffffff fault addr 
7fa8a78000 [fault reason 05] PTE Write access is not set
 DMAR: fault 7fa8a78000 (level=1) PTE = 149efc003

So not really sure what's going on and this might just be full on duct
tape, but it seems to work here. The machine has now survived a whole day
running that test whereas with superpage enabled it fails in less than
a minute usually.

TODO: might be nice to disable superpage only for the igfx iommu
      instead of both iommus
TODO: would be nice to use the macros from include/drm/i915_pciids.h,
      but can't do that with DECLARE_PCI_FIXUP_HEADER()

Cc: David Woodhouse <dw...@infradead.org>
Cc: Lu Baolu <baolu...@linux.intel.com>
Cc: io...@lists.linux-foundation.org
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 19c7888cbb86..4fff2c9c86af 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5617,6 +5617,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, 
quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx);
 
+static void quirk_iommu_nosp(struct pci_dev *dev)
+{
+       pci_info(dev, "Disabling IOMMU superpage for graphics on this 
chipset\n");
+       intel_iommu_superpage = 0;
+}
+
+/* Geminilake igfx appears to have issues with superpage */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3184, quirk_iommu_nosp);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3185, quirk_iommu_nosp);
+
 static void quirk_iommu_rwbf(struct pci_dev *dev)
 {
        if (risky_device(dev))
-- 
2.31.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to