On Thu, 02 Sep 2021, Lee Shawn C <shawn.c....@intel.com> wrote:
> Driver has to swap the endian before send brightness level value
> to tcon.
>
> v2: Use __be16 instead of u16 to fix sparse warning.
> v3: Send one or two bytes brightness value depend on the precision.
> v4: get data length of brightness value more easily.
>
> Reported-by: kernel test robot <l...@intel.com>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulka...@intel.com>
> Cc: Cooper Chiou <cooper.ch...@intel.com>
> Cc: William Tseng <william.ts...@intel.com>
> Signed-off-by: Lee Shawn C <shawn.c....@intel.com>
Reviewed-by: Jani Nikula <jani.nik...@intel.com>
> ---
> .../i915/display/intel_dsi_dcs_backlight.c | 23 +++++++++++++------
> 1 file changed, 16 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> index 21ab9e1acb57..d2bf2bc9ae46 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> @@ -47,33 +47,42 @@ static u32 dcs_get_backlight(struct intel_connector
> *connector, enum pipe unused
> {
> struct intel_encoder *encoder = intel_attached_encoder(connector);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
> + struct intel_panel *panel = &connector->panel;
> struct mipi_dsi_device *dsi_device;
> - u8 data = 0;
> + u8 data[2] = {};
> enum port port;
> + size_t len = panel->backlight.max > U8_MAX ? 2 : 1;
>
> - /* FIXME: Need to take care of 16 bit brightness level */
> for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
> dsi_device = intel_dsi->dsi_hosts[port]->device;
> mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
> - &data, sizeof(data));
> + &data, len);
> break;
> }
>
> - return data;
> + return (data[1] << 8) | data[0];
> }
>
> static void dcs_set_backlight(const struct drm_connector_state *conn_state,
> u32 level)
> {
> struct intel_dsi *intel_dsi =
> enc_to_intel_dsi(to_intel_encoder(conn_state->best_encoder));
> + struct intel_panel *panel =
> &to_intel_connector(conn_state->connector)->panel;
> struct mipi_dsi_device *dsi_device;
> - u8 data = level;
> + u8 data[2] = {};
> enum port port;
> + size_t len = panel->backlight.max > U8_MAX ? 2 : 1;
> +
> + if (len == 1) {
> + data[0] = level;
> + } else {
> + data[0] = level >> 8;
> + data[1] = level;
> + }
>
> - /* FIXME: Need to take care of 16 bit brightness level */
> for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
> dsi_device = intel_dsi->dsi_hosts[port]->device;
> mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
> - &data, sizeof(data));
> + &data, len);
> }
> }
--
Jani Nikula, Intel Open Source Graphics Center
