> -----Original Message-----
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Sent: Tuesday, September 14, 2021 12:59 PM
> To: Kulkarni, Vandita <vandita.kulka...@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nik...@intel.com>;
> Navare, Manasi D <manasi.d.nav...@intel.com>
> Subject: Re: [Intel-gfx] [PATCH] drm/i915/display: Enable second VDSC
> engine for higher moderates
>
> On Mon, Sep 13, 2021 at 08:09:23PM +0530, Vandita Kulkarni wrote:
> > Each VDSC operates with 1ppc throughput, hence enable the second VDSC
> > engine when moderate is higher that the current cdclk.
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulka...@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++++++--
> > 1 file changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 161c33b2c869..55878f65f724 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -70,6 +70,7 @@
> > #include "intel_tc.h"
> > #include "intel_vdsc.h"
> > #include "intel_vrr.h"
> > +#include "intel_cdclk.h"
> >
> > #define DP_DPRX_ESI_LEN 14
> >
> > @@ -1291,10 +1292,13 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> > struct drm_connector_state *conn_state,
> > struct link_config_limits *limits) {
> > + struct intel_cdclk_state *cdclk_state;
> > struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> > const struct drm_display_mode *adjusted_mode =
> > &pipe_config->hw.adjusted_mode;
> > + struct intel_atomic_state *state =
> > + to_intel_atomic_state(pipe_config-
> >uapi.state);
> > int pipe_bpp;
> > int ret;
> >
> > @@ -1373,12 +1377,16 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> > }
> > }
> >
> > + cdclk_state = intel_atomic_get_cdclk_state(state);
> > + if (IS_ERR(cdclk_state))
> > + return PTR_ERR(cdclk_state);
> > +
> > /*
> > * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
> > - * is greater than the maximum Cdclock and if slice count is even
> > + * is greater than the current Cdclock and if slice count is even
> > * then we need to use 2 VDSC instances.
> > */
> > - if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq ||
> > + if (adjusted_mode->crtc_clock > cdclk_state->actual.cdclk ||
>
> This is wrong. We compute the cdclk based on the requirements of the
> mode/etc., not the other way around.
Okay , So you suggest that we set the cd clock to max when we have such
requirement, than enabling the second engine?
>
> > pipe_config->bigjoiner) {
> > if (pipe_config->dsc.slice_count < 2) {
> > drm_dbg_kms(&dev_priv->drm,
> > --
> > 2.32.0
>
> --
> Ville Syrjälä
> Intel
