From: Ville Syrjälä <ville.syrj...@linux.intel.com>
The DP spec says:
"If the receiver keeps the same value in the ADJUST_REQUEST_LANEx_y
register(s) while the LANEx_CR_DONE bits remain unset, the transmitter
must loop four times with the same voltage swing. On the fifth time,
the transmitter must down-shift to the lower bit rate and must repeat
the CR-lock training sequence as described below."
Lets fix the code to follow that instead of terminating after five
times of transmitting the same signal levels. The text in spec feels
a little bit ambiguous still, but this is my best guess at its meaning.
As a bonus this also gets rid of the train_set[0] stuff which
would not work for per-lane drive settings anyway.
Cc: Imre Deak <imre.d...@intel.com>
CC: Jani Nikula <jani.nik...@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
.../drm/i915/display/intel_dp_link_training.c | 29 +++++++++++++++----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index 053ed9302cda..73a823f1ec22 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -511,6 +511,25 @@ static void
intel_dp_link_training_clock_recovery_delay(struct intel_dp *intel_d
drm_dp_lttpr_link_train_clock_recovery_delay();
}
+static bool intel_dp_adjust_request_changed(int lane_count,
+ const u8
old_link_status[DP_LINK_STATUS_SIZE],
+ const u8
new_link_status[DP_LINK_STATUS_SIZE])
+{
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ u8 old = drm_dp_get_adjust_request_voltage(old_link_status,
lane) |
+ drm_dp_get_adjust_request_pre_emphasis(old_link_status,
lane);
+ u8 new = drm_dp_get_adjust_request_voltage(new_link_status,
lane) |
+ drm_dp_get_adjust_request_pre_emphasis(new_link_status,
lane);
+
+ if (old != new)
+ return true;
+ }
+
+ return false;
+}
+
/*
* Perform the link training clock recovery phase on the given DP PHY using
* training pattern 1.
@@ -521,7 +540,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp
*intel_dp,
enum drm_dp_phy dp_phy)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
- u8 voltage;
+ u8 old_link_status[DP_LINK_STATUS_SIZE] = {};
int voltage_tries, cr_tries, max_cr_tries;
bool max_vswing_reached = false;
@@ -574,8 +593,6 @@ intel_dp_link_training_clock_recovery(struct intel_dp
*intel_dp,
return false;
}
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
-
/* Update training set as requested by target */
intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy,
link_status);
@@ -585,12 +602,14 @@ intel_dp_link_training_clock_recovery(struct intel_dp
*intel_dp,
return false;
}
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
- voltage)
+ if (!intel_dp_adjust_request_changed(crtc_state->lane_count,
+ old_link_status,
link_status))
++voltage_tries;
else
voltage_tries = 1;
+ memcpy(old_link_status, link_status, sizeof(link_status));
+
if (intel_dp_link_max_vswing_reached(intel_dp, crtc_state))
max_vswing_reached = true;
--
2.32.0
