On Thu, 28 Oct 2021, "Kulkarni, Vandita" <vandita.kulka...@intel.com> wrote:
>> -----Original Message-----
>> From: Nikula, Jani <jani.nik...@intel.com>
>> Sent: Thursday, October 28, 2021 5:13 PM
>> To: Kulkarni, Vandita <vandita.kulka...@intel.com>; intel-
>> g...@lists.freedesktop.org
>> Cc: Deak, Imre <imre.d...@intel.com>; Roper, Matthew D
>> <matthew.d.ro...@intel.com>; ville.syrj...@linux.intel.com; Kulkarni,
>> Vandita <vandita.kulka...@intel.com>
>> Subject: Re: [V2 4/4] drm/i915/dsi: Ungate clock before enabling the phy
>>
>> On Tue, 19 Oct 2021, Vandita Kulkarni <vandita.kulka...@intel.com> wrote:
>> > For the PHY enable/disable signalling to propagate between Dispaly and
>> > PHY, DDI clocks need to be running when enabling the PHY.
>> >
>> > Bspec: 49188 says gate the clocks after enabling the
>> > DDI Buffer.
>> > We also have a commit 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi
>> > clocks after pll mapping") which gates the clocks much before,
>> > as per the older spec. This commit nullifies its effect and makes
>> > sure that the clocks are not gated while we enable the DDI
>> > buffer.
>> > v2: Bspec ref, add a comment wrt earlier clock gating sequence (Jani)
>> >
>> > Signed-off-by: Vandita Kulkarni <vandita.kulka...@intel.com>
>> > ---
>> > drivers/gpu/drm/i915/display/icl_dsi.c | 8 +++-----
>> > 1 file changed, 3 insertions(+), 5 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
>> > b/drivers/gpu/drm/i915/display/icl_dsi.c
>> > index 63dd75c6448a..e5ef5c4a32d7 100644
>> > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
>> > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
>> > @@ -1135,8 +1135,6 @@ static void
>> > gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
>> > const struct intel_crtc_state *crtc_state) {
>> > - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> > -
>> > /* step 4a: power up all lanes of the DDI used by DSI */
>> > gen11_dsi_power_up_lanes(encoder);
>> >
>> > @@ -1146,6 +1144,8 @@ gen11_dsi_enable_port_and_phy(struct
>> intel_encoder *encoder,
>> > /* step 4c: configure voltage swing and skew */
>> > gen11_dsi_voltage_swing_program_seq(encoder);
>> >
>> > + gen11_dsi_ungate_clocks(encoder);
>> > +
>>
>> What about the changes to gen11_dsi_map_pll() in commit 991d9557b0c4
>> ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")? It starts off
>> with
>> clocks gated for gen12+, ungated otherwise.
>
> Now the same spec is updated with the gate step after ddi buffer enable.
> And the one before is marked with remove tag.
> That makes all gen12+ align with gen 11.
> You suggested to update the same in the commit message on v1.
> Should I still consider just reverting that commit?
I'm just royally confused about the sequence myself, so I'm asking
you. ;)
It doesn't help that the code has step references to gen 11 mode set
that are completely different from the steps in gen 12 sequence.
BR,
Jani.
>
> Thanks,
> Vandita
>
>>
>> BR,
>> Jani.
>>
>>
>> > /* enable DDI buffer */
>> > gen11_dsi_enable_ddi_buffer(encoder);
>> >
>> > @@ -1161,9 +1161,7 @@ gen11_dsi_enable_port_and_phy(struct
>> intel_encoder *encoder,
>> > /* Step (4h, 4i, 4j, 4k): Configure transcoder */
>> > gen11_dsi_configure_transcoder(encoder, crtc_state);
>> >
>> > - /* Step 4l: Gate DDI clocks */
>> > - if (DISPLAY_VER(dev_priv) == 11)
>> > - gen11_dsi_gate_clocks(encoder);
>> > + gen11_dsi_gate_clocks(encoder);
>> > }
>> >
>> > static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
>>
>> --
>> Jani Nikula, Intel Open Source Graphics Center
--
Jani Nikula, Intel Open Source Graphics Center
