On Tue, 09 Nov 2021, William Tseng <william.ts...@intel.com> wrote: > In Video Mode, if DSI transcoder is set to transmit packets > in LP Escape mode, screen flickering would be obseved when > brightness commands are continuously and quickly transmitted > to a panel. > > The problem may be resolved by changing the mode to transmit > packets from Low Power to HS. > > Cc: Ville Syrjala <ville.syrj...@linux.intel.com> > Cc: Jani Nikula <jani.nik...@linux.intel.com> > Cc: Vandita Kulkarni <vandita.kulka...@intel.com> > Cc: Lee Shawn C <shawn.c....@intel.com> > Cc: Cooper Chiou <cooper.ch...@intel.com> > Signed-off-by: William Tseng <william.ts...@intel.com> > --- > drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c > b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c > index f61ed82e8867..a71ef1eb598c 100644 > --- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c > +++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c > @@ -81,6 +81,7 @@ static void dcs_set_backlight(const struct > drm_connector_state *conn_state, u32 > > for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) { > dsi_device = intel_dsi->dsi_hosts[port]->device; > + dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
Frankly I forget how this is intended to be used, but feels like you should maybe restore the flags afterwards. BR, Jani. > mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, > &data, len); > } -- Jani Nikula, Intel Open Source Graphics Center