> -----Original Message-----
> From: Nikula, Jani <jani.nik...@intel.com>
> Sent: Thursday, June 2, 2022 8:41 PM
> To: Manna, Animesh <animesh.ma...@intel.com>; intel-
> g...@lists.freedesktop.org
> Cc: ville.syrj...@linux.intel.com; Shankar, Uma <uma.shan...@intel.com>;
> Manna, Animesh <animesh.ma...@intel.com>
> Subject: Re: [RFC PATCH 1/5] drm/i915/bios: calculate drrs mode using panel
> index for dual LFP
>
> On Thu, 02 Jun 2022, Jani Nikula <jani.nik...@intel.com> wrote:
> > On Thu, 02 Jun 2022, Animesh Manna <animesh.ma...@intel.com> wrote:
> >> Dual LFP may have different panel and based on panel index respective
> >> 2 bits store the drrs mode info for each panel. So panel index is
> >> used for deriving drrs mode of the rspective panel.
> >>
> >> Signed-off-by: Animesh Manna <animesh.ma...@intel.com>
> >> ---
> >> drivers/gpu/drm/i915/display/icl_dsi.c | 2 +-
> >> drivers/gpu/drm/i915/display/intel_bios.c | 45 +++++++++++++++++--
> >> drivers/gpu/drm/i915/display/intel_bios.h | 3 +-
> >> drivers/gpu/drm/i915/display/intel_dp.c | 3 +-
> >> drivers/gpu/drm/i915/display/intel_lvds.c | 3 +-
> >> drivers/gpu/drm/i915/display/intel_sdvo.c | 2 +-
> >> drivers/gpu/drm/i915/display/intel_vbt_defs.h | 4 ++
> >> drivers/gpu/drm/i915/display/vlv_dsi.c | 2 +-
> >> 8 files changed, 52 insertions(+), 12 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> >> b/drivers/gpu/drm/i915/display/icl_dsi.c
> >> index 3b5305c219ba..b3aa430abd03 100644
> >> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> >> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> >> @@ -2050,7 +2050,7 @@ void icl_dsi_init(struct drm_i915_private
> *dev_priv)
> >> /* attach connector to encoder */
> >> intel_connector_attach_encoder(intel_connector, encoder);
> >>
> >> - intel_bios_init_panel(dev_priv, &intel_connector->panel, NULL);
> >> + intel_bios_init_panel(dev_priv, intel_connector, NULL);
> >>
> >> mutex_lock(&dev->mode_config.mutex);
> >> intel_panel_add_vbt_lfp_fixed_mode(intel_connector);
> >> diff --git a/drivers/gpu/drm/i915/display/intel_bios.c
> >> b/drivers/gpu/drm/i915/display/intel_bios.c
> >> index 337277ae3dae..78eaf6255599 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_bios.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> >> @@ -747,7 +747,8 @@ static int get_panel_type(struct drm_i915_private
> >> *i915, static void parse_panel_options(struct drm_i915_private
> >> *i915,
> >> struct intel_panel *panel,
> >> - const struct edid *edid)
> >> + const struct edid *edid,
> >> + int panel_index)
> >> {
> >> const struct bdb_lvds_options *lvds_options;
> >> int panel_type;
> >> @@ -764,7 +765,7 @@ parse_panel_options(struct drm_i915_private *i915,
> >> panel->vbt.panel_type = panel_type;
> >>
> >> drrs_mode = (lvds_options->dps_panel_type_bits
> >> - >> (panel_type * 2)) & MODE_MASK;
> >> + >> (panel_index * 2)) & MODE_MASK;
> >
> > It's the get_panel_type() call that needs to take the panel number
> > into account, and return the panel specific panel_type from there.
> > After that, it's stored in panel->vbt.panel_type and it'll be used
> > everywere. DRRS is not a special case.
> >
> >> /*
> >> * VBT has static DRRS = 0 and seamless DRRS = 2.
> >> * The below piece of code is required to adjust vbt.drrs_type @@
> >> -3069,13 +3070,49 @@ void intel_bios_init(struct drm_i915_private *i915)
> >> kfree(oprom_vbt);
> >> }
> >>
> >> +static int
> >> +get_lfp_panel_index(struct drm_i915_private *i915, int
> >> +lfp_panel_instance) {
> >> + const struct bdb_lvds_options *lvds_options;
> >> +
> >> + lvds_options = find_section(i915, BDB_LVDS_OPTIONS);
> >> + if (!lvds_options)
> >> + return -1;
> >> +
> >> + switch (lfp_panel_instance) {
> >> + case 1:
> >> + return lvds_options->panel_type;
> >> + case 2:
> >> + return lvds_options->panel_type2;
> >> + default:
> >> + break;
> >> + }
> >> +
> >> + return -1;
> >> +}
> >
> > Nah, it's not this simple. See get_panel_type(). Either of the
> > panel_type fields could be 0xff to indicate PNPID based lookup.
> >
> >> +
> >> void intel_bios_init_panel(struct drm_i915_private *i915,
> >> - struct intel_panel *panel,
> >> + struct intel_connector *intel_connector,
> >> const struct edid *edid)
> >> {
> >> + struct intel_panel *panel = &intel_connector->panel;
> >> + struct intel_encoder *encoder = intel_connector->encoder;
> >> + const struct intel_bios_encoder_data *devdata =
> >> +i915->vbt.ports[encoder->port];
> >
> > This might be NULL, we don't initialize ports for all platforms.
> >
> >
> >> + int lfp_inst = 0, panel_index;
> >> +
> >> init_vbt_panel_defaults(panel);
> >>
> >> - parse_panel_options(i915, panel, edid);
> >> + if (devdata->child.handle == HANDLE_LFP_1)
> >> + lfp_inst = 1;
> >> + else if (devdata->child.handle == HANDLE_LFP_2)
> >> + lfp_inst = 2;
> >> +
> >> + if (lfp_inst == 0)
> >> + return;
> >> +
> >> + panel_index = get_lfp_panel_index(i915, lfp_inst);
> >> +
> >> + parse_panel_options(i915, panel, edid, panel_index);
>
> Also, none of this handling should happen here. Just pass devdata on to
> parse_panel_options(), and pass it on further to get_panel_type(), which
> should
> be the single point of truth for figuring out the panel type.
Ok, will do in next version.
Thank Jani for review.
Regards,
Animesh
>
> >> parse_generic_dtd(i915, panel);
> >> parse_lfp_data(i915, panel);
> >> parse_lfp_backlight(i915, panel);
> >> diff --git a/drivers/gpu/drm/i915/display/intel_bios.h
> >> b/drivers/gpu/drm/i915/display/intel_bios.h
> >> index b112200ae0a0..e4c268495547 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_bios.h
> >> +++ b/drivers/gpu/drm/i915/display/intel_bios.h
> >> @@ -37,6 +37,7 @@ struct edid;
> >> struct intel_bios_encoder_data;
> >> struct intel_crtc_state;
> >> struct intel_encoder;
> >> +struct intel_connector;
> >> struct intel_panel;
> >> enum port;
> >>
> >> @@ -233,7 +234,7 @@ struct mipi_pps_data {
> >>
> >> void intel_bios_init(struct drm_i915_private *dev_priv); void
> >> intel_bios_init_panel(struct drm_i915_private *dev_priv,
> >> - struct intel_panel *panel,
> >> + struct intel_connector *intel_connector,
> >> const struct edid *edid);
> >> void intel_bios_fini_panel(struct intel_panel *panel); void
> >> intel_bios_driver_remove(struct drm_i915_private *dev_priv); diff
> >> --git a/drivers/gpu/drm/i915/display/intel_dp.c
> >> b/drivers/gpu/drm/i915/display/intel_dp.c
> >> index 1bc1f6458e81..3e9b4263e1bc 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> >> @@ -5213,8 +5213,7 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
> >> }
> >> intel_connector->edid = edid;
> >>
> >> - intel_bios_init_panel(dev_priv, &intel_connector->panel,
> >> - IS_ERR(edid) ? NULL : edid);
> >> + intel_bios_init_panel(dev_priv, intel_connector, IS_ERR(edid) ?
> >> +NULL : edid);
> >>
> >> intel_panel_add_edid_fixed_modes(intel_connector,
> >> intel_connector->panel.vbt.drrs_type
> != DRRS_TYPE_NONE); diff
> >> --git a/drivers/gpu/drm/i915/display/intel_lvds.c
> >> b/drivers/gpu/drm/i915/display/intel_lvds.c
> >> index 595f03343939..2c60267f9d37 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_lvds.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_lvds.c
> >> @@ -967,8 +967,7 @@ void intel_lvds_init(struct drm_i915_private
> *dev_priv)
> >> }
> >> intel_connector->edid = edid;
> >>
> >> - intel_bios_init_panel(dev_priv, &intel_connector->panel,
> >> - IS_ERR(edid) ? NULL : edid);
> >> + intel_bios_init_panel(dev_priv, intel_connector, IS_ERR(edid) ?
> >> +NULL : edid);
> >>
> >> /* Try EDID first */
> >> intel_panel_add_edid_fixed_modes(intel_connector,
> >> diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c
> >> b/drivers/gpu/drm/i915/display/intel_sdvo.c
> >> index d9de2c4d67a7..3b7fe117bc5b 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_sdvo.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
> >> @@ -2901,7 +2901,7 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo,
> int device)
> >> if (!intel_sdvo_create_enhance_property(intel_sdvo,
> intel_sdvo_connector))
> >> goto err;
> >>
> >> - intel_bios_init_panel(i915, &intel_connector->panel, NULL);
> >> + intel_bios_init_panel(i915, intel_connector, NULL);
> >>
> >> /*
> >> * Fetch modes from VBT. For SDVO prefer the VBT mode since some
> >> diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> >> b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> >> index 4b98bab3b890..fbda64e3a34d 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> >> +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> >> @@ -349,6 +349,10 @@ enum vbt_gmbus_ddi {
> >> #define BDB_230_VBT_DP_MAX_LINK_RATE_UHBR13P5 6
> >> #define BDB_230_VBT_DP_MAX_LINK_RATE_UHBR20 7
> >>
> >> +/* VBT info for DUAL LFP */
> >> +#define HANDLE_LFP_1 0x0008
> >> +#define HANDLE_LFP_2 0x0080
> >
> > Please move these before the DEVICE_TYPE_* macros, and name
> > DEVICE_HANDLE_*. The comment should refer to device handles, and
> > there's no need to mention VBT or dual LFP.
> >
> > BR,
> > Jani.
> >
> >> +
> >> /*
> >> * The child device config, aka the display device data structure,
> >> provides a
> >> * description of a port and its configuration on the platform.
> >> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c
> >> b/drivers/gpu/drm/i915/display/vlv_dsi.c
> >> index abda0888c8d4..114e4f89f198 100644
> >> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> >> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> >> @@ -1926,7 +1926,7 @@ void vlv_dsi_init(struct drm_i915_private
> >> *dev_priv)
> >>
> >> intel_dsi->panel_power_off_time = ktime_get_boottime();
> >>
> >> - intel_bios_init_panel(dev_priv, &intel_connector->panel, NULL);
> >> + intel_bios_init_panel(dev_priv, intel_connector, NULL);
> >>
> >> if (intel_connector->panel.vbt.dsi.config->dual_link)
> >> intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
>
> --
> Jani Nikula, Intel Open Source Graphics Center