A follow-up patch simplifies the tc_cold_block()/unblock() functions,
dropping the power domain parameter. For this it must be ensured that
the power domain - which depends on the actual TC mode and so the VBT
legacy port flag - can't change while the PHY is in a connected state
and accordingly TC-cold is blocked. Make this so, by fixing up the VBT
legacy flag only in the disconnected TC mode, instead of whenever the
HPD state is retrieved.

Signed-off-by: Imre Deak <imre.d...@intel.com>
---
 drivers/gpu/drm/i915/display/intel_tc.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_tc.c 
b/drivers/gpu/drm/i915/display/intel_tc.c
index e63e9c57e5627..e61daa40356b5 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -298,6 +298,11 @@ static void tc_port_fixup_legacy_flag(struct intel_tc_port 
*tc,
        struct drm_i915_private *i915 = tc_to_i915(tc);
        u32 valid_hpd_mask;
 
+       drm_WARN_ON(&i915->drm, tc->mode != TC_PORT_DISCONNECTED);
+
+       if (hweight32(live_status_mask) != 1)
+               return;
+
        if (tc->legacy_port)
                valid_hpd_mask = BIT(TC_PORT_LEGACY);
        else
@@ -625,8 +630,7 @@ static u32 tc_phy_hpd_live_status(struct intel_tc_port *tc)
        mask = tc->phy_ops->hpd_live_status(tc);
 
        /* The sink can be connected only in a single mode. */
-       if (!drm_WARN_ON_ONCE(&i915->drm, hweight32(mask) > 1))
-               tc_port_fixup_legacy_flag(tc, mask);
+       drm_WARN_ON_ONCE(&i915->drm, hweight32(mask) > 1);
 
        return mask;
 }
@@ -826,9 +830,12 @@ tc_phy_get_target_mode(struct intel_tc_port *tc)
 static void tc_phy_connect(struct intel_tc_port *tc, int required_lanes)
 {
        struct drm_i915_private *i915 = tc_to_i915(tc);
+       u32 live_status_mask = tc_phy_hpd_live_status(tc);
        bool connected;
 
-       tc->mode = tc_phy_get_target_mode(tc);
+       tc_port_fixup_legacy_flag(tc, live_status_mask);
+
+       tc->mode = hpd_mask_to_target_mode(tc, live_status_mask);
 
        connected = tc->phy_ops->connect(tc, required_lanes);
        if (!connected && tc->mode != default_tc_mode(tc)) {
-- 
2.37.1

Reply via email to