On 5/31/2023 16:54, Daniele Ceraolo Spurio wrote:
In the previous patch we extracted the offset of the legacy-style HuC
binary located within the GSC-enabled blob, so now we can use that to
load the HuC via DMA if the fuse is set that way.
Note that we now need to differentiate between "GSC-enabled binary" and
"loaded by GSC", so the former case has been renamed to "has GSC headers"
for clarity, while the latter is now based on the fuse instead of the
binary format. This way, all the legacy load paths are automatically
taken (including the auth by GuC) without having to implement further
code changes.
v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John)
v3: split check for GSC access, better comments (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospu...@intel.com>
Cc: Alan Previn <alan.previn.teres.ale...@intel.com>
Cc: John Harrison <john.c.harri...@intel.com>
---
drivers/gpu/drm/i915/gt/uc/intel_huc.c | 49 +++++++++++++++++------
drivers/gpu/drm/i915/gt/uc/intel_huc.h | 4 +-
drivers/gpu/drm/i915/gt/uc/intel_huc_fw.c | 2 +-
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c | 12 +++---
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h | 2 +-
5 files changed, 47 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_huc.c
b/drivers/gpu/drm/i915/gt/uc/intel_huc.c
index 6d795438b3e4..27c5e41fa84c 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_huc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_huc.c
@@ -298,31 +298,54 @@ void intel_huc_init_early(struct intel_huc *huc)
static int check_huc_loading_mode(struct intel_huc *huc)
{
struct intel_gt *gt = huc_to_gt(huc);
- bool fw_needs_gsc = intel_huc_is_loaded_by_gsc(huc);
- bool hw_uses_gsc = false;
+ bool gsc_enabled = huc->fw.has_gsc_headers;
/*
* The fuse for HuC load via GSC is only valid on platforms that have
* GuC deprivilege.
*/
if (HAS_GUC_DEPRIVILEGE(gt->i915))
- hw_uses_gsc = intel_uncore_read(gt->uncore, GUC_SHIM_CONTROL2) &
- GSC_LOADS_HUC;
+ huc->loaded_via_gsc = intel_uncore_read(gt->uncore,
GUC_SHIM_CONTROL2) &
+ GSC_LOADS_HUC;
- if (fw_needs_gsc != hw_uses_gsc) {
- huc_err(huc, "mismatch between FW (%s) and HW (%s) load
modes\n",
- HUC_LOAD_MODE_STRING(fw_needs_gsc),
HUC_LOAD_MODE_STRING(hw_uses_gsc));
+ if (huc->loaded_via_gsc && !gsc_enabled) {
+ huc_err(huc, "HW requires a GSC-enabled blob, but we found a legacy
one\n");
return -ENOEXEC;
}
- /* make sure we can access the GSC via the mei driver if we need it */
- if (!(IS_ENABLED(CONFIG_INTEL_MEI_PXP) && IS_ENABLED(CONFIG_INTEL_MEI_GSC))
&&
- fw_needs_gsc) {
- huc_info(huc, "can't load due to missing MEI modules\n");
- return -EIO;
+ /*
+ * On newer platforms we have GSC-enabled binaries but we load the HuC
+ * via DMA. To do so we need to find the location of the legacy-style
+ * binary inside the GSC-enabled one, which we do at fetch time. Make
+ * sure that we were able to do so if the fuse says we need to load via
+ * DMA and the binary is GSC-enabled.
+ */
+ if (!huc->loaded_via_gsc && gsc_enabled && !huc->fw.dma_start_offset) {
+ huc_err(huc, "HW in DMA mode, but we have an incompatible
GSC-enabled blob\n");
+ return -ENOEXEC;
+ }
+
+ /*
+ * If the HuC is loaded via GSC, we need to be able to access the GSC.
+ * On DG2 this is done via the mei components, while on newer platforms
+ * it is done via the GSCCS,
+ */
+ if (huc->loaded_via_gsc) {
+ if (IS_DG2(gt->i915)) {
+ if (!IS_ENABLED(CONFIG_INTEL_MEI_PXP) ||
+ !IS_ENABLED(CONFIG_INTEL_MEI_GSC)) {
+ huc_info(huc, "can't load due to missing mei
modules\n");
+ return -EIO;
+ }
+ } else {
+ if (!HAS_ENGINE(gt, GSC0)){
Checkpatch is complaining about lack of a space here. Maybe fix on merge
rather than repost if that is the only issue?
John.
