Recent improvements to the kernel kunit framework allow us to obtain a list of test cases provided by a kunit test module without actually running them. Use that feature to get a list of expected test cases before we enter a loop around igt_dynamic(). Once done, enter the igt_dynamic() section for each consecutive test case immediately, even before first line of a related KTAP report appears, then look for a result from that test case. That should make our IGT results output still better synchronized with related kernel messages.
The list of test cases provided by a kunit test module can be obtained by loading the kunit base module with specific options, then loading the test module. For that to be possible, take care of unloading the kunit base module before each kunit subtest (I was wrong when in one of my previous commit messages I suggested that on final unload of a kunit test module the kunit base module is unloaded automatically as its dependency, however, that didn't matter before, then no separate fix was required). Since that module can then be left loaded with non-default options if an error occurs, unload it explicitly before returning from igt_kunit(). There are two possible ways of getting a list of test cases: by loading the base kunit module with action=list module option, or by filtering out all test cases from being executed while asking for SKIP results from those filtered out. Since the latter provides regular KTAP report that we can already parse perfectly, use it instead of trying to identify an unstructured list of test cases of unknown length submitted by the former. If an IGT test that calls igt_kunit() provides a subtest name then use that name to filter out potential test cases that don't belong to the named test suite from the list. To avoid loading any modules if no subtest is going to be executed (e.g., if a nonexistent subtest has been requested), load the kunit modules in list mode from inside the igt_subtest_with_dynamic() section. In order to be free to skip the whole subtest on unmet requirements that need to be verified after that list has been already populated, clean it up from a follow up igt_fixture section. Since we may now finish processing of all test cases / dynamic sub- subtests before KTAP parsing completes, don't fail if we exit the loop of dynamic sub-subtests with -EINPROGRESS error code returned by the parser. v2: Split out changes in handling of modprobe errors and kernel taints to separate patches (Kamil), - fix some string duplicates referenced from filtered out test cases not freed, - don't check if next result is needed before fetching one, obviously true in first dynamic sub-subtest, and we always free last result before looping to next sub-subtest, - still break the loop of test cases on unexpected return codes from kunit_kmsg_get_result(), - use kunit_results_free() helper, - fix typos (Kamil), - update commit description. Signed-off-by: Janusz Krzysztofik <janusz.krzyszto...@linux.intel.com> --- lib/igt_kmod.c | 169 ++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 132 insertions(+), 37 deletions(-) diff --git a/lib/igt_kmod.c b/lib/igt_kmod.c index ed41aa1235..150fe49803 100644 --- a/lib/igt_kmod.c +++ b/lib/igt_kmod.c @@ -899,17 +899,15 @@ static void kunit_results_free(struct igt_list_head *results, free(*suite_name); } -static void -__igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) +static void kunit_get_tests(struct igt_list_head *tests, + struct igt_ktest *tst, + const char *filter, + const char *opts) { - struct modprobe_data modprobe = { pthread_self(), tst->kmod, opts, 0, }; char *suite_name = NULL, *case_name = NULL; + struct igt_ktap_result *r, *rn; struct igt_ktap_results *ktap; - struct igt_ktap_result *r; - pthread_mutexattr_t attr; - IGT_LIST_HEAD(results); - unsigned long taints; - int flags, ret; + int flags, err; igt_skip_on_f(tst->kmsg < 0, "Could not open /dev/kmsg\n"); @@ -919,6 +917,70 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) igt_skip_on(lseek(tst->kmsg, 0, SEEK_END) < 0); + /* + * To get a list of test cases provided by a kunit test module, ask the + * generic kunit module to respond with SKIP result for each test found. + * We could also use action=list kunit parameter to get the listing, + * however, parsing a KTAP report -- something that we already can do + * perfectly -- seems to be more safe than extracting a test case list + * of unknown length from /dev/kmsg. + */ + igt_skip_on(igt_kmod_load("kunit", "filter=module=none filter_action=skip")); + igt_skip_on(modprobe(tst->kmod, opts)); + + ktap = igt_ktap_alloc(tests); + igt_require(ktap); + + do + err = kunit_kmsg_result_get(tests, NULL, tst->kmsg, ktap); + while (err == -EINPROGRESS); + + igt_ktap_free(ktap); + + if (!err) + igt_list_for_each_entry_safe(r, rn, tests, link) { + if (igt_debug_on(r->code != IGT_EXIT_SKIP)) { + err = r->code ?: -EPROTO; + break; + } + + if (!filter) + continue; + + if (strcmp(r->suite_name, filter)) + kunit_result_free(&r, &case_name, &suite_name); + } + + if (err) { + kunit_results_free(tests, &case_name, &suite_name); + } else { + free(suite_name); + free(case_name); + } + + igt_skip_on(kmod_module_remove_module(tst->kmod, KMOD_REMOVE_FORCE)); + igt_skip_on(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE)); + + igt_skip_on_f(err, + "KTAP parser failed while getting a list of test cases\n"); +} + +static void __igt_kunit(struct igt_ktest *tst, + const char *name, + const char *opts, + struct igt_list_head *tests) +{ + struct modprobe_data modprobe = { pthread_self(), tst->kmod, opts, 0, }; + char *suite_name = NULL, *case_name = NULL; + struct igt_ktap_result *t, *r = NULL; + struct igt_ktap_results *ktap; + pthread_mutexattr_t attr; + IGT_LIST_HEAD(results); + int ret = -EINPROGRESS; + unsigned long taints; + + igt_skip_on(lseek(tst->kmsg, 0, SEEK_END) < 0); + igt_skip_on(pthread_mutexattr_init(&attr)); igt_skip_on(pthread_mutexattr_setrobust(&attr, PTHREAD_MUTEX_ROBUST)); igt_skip_on(pthread_mutex_init(&modprobe.lock, &attr)); @@ -932,37 +994,47 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) igt_skip("Failed to create a modprobe thread\n"); } - do { - ret = kunit_kmsg_result_get(&results, &modprobe, - tst->kmsg, ktap); - if (igt_debug_on(ret && ret != -EINPROGRESS)) - break; - - if (igt_debug_on(igt_list_empty(&results))) - break; - - r = igt_list_first_entry(&results, r, link); - + igt_list_for_each_entry(t, tests, link) { igt_dynamic_f("%s%s%s", - strcmp(r->suite_name, name) ? r->suite_name : "", - strcmp(r->suite_name, name) ? "-" : "", - r->case_name) { - - if (r->code == IGT_EXIT_INVALID) { - /* parametrized test case, get actual result */ - kunit_result_free(&r, &suite_name, &case_name); - - igt_assert(igt_list_empty(&results)); + strcmp(t->suite_name, name) ? t->suite_name : "", + strcmp(t->suite_name, name) ? "-" : "", + t->case_name) { + if (igt_list_empty(&results)) { + igt_assert_eq(ret, -EINPROGRESS); ret = kunit_kmsg_result_get(&results, &modprobe, tst->kmsg, ktap); - if (ret != -EINPROGRESS) - igt_fail_on(ret); - igt_fail_on(igt_list_empty(&results)); + } + + r = igt_list_first_entry(&results, r, link); + + while (igt_debug_on_f(strcmp(r->suite_name, t->suite_name), + "suite_name expected: %s, got: %s\n", + t->suite_name, r->suite_name) || + igt_debug_on_f(strcmp(r->case_name, t->case_name), + "case_name expected: %s, got: %s\n", + t->case_name, r->case_name) || + r->code == IGT_EXIT_INVALID) { + + int code = r->code; + + kunit_result_free(&r, &suite_name, &case_name); + if (igt_list_empty(&results)) { + igt_assert_eq(ret, -EINPROGRESS); + ret = kunit_kmsg_result_get(&results, + &modprobe, + tst->kmsg, + ktap); + igt_fail_on(igt_list_empty(&results)); + } r = igt_list_first_entry(&results, r, link); + if (code != IGT_EXIT_INVALID) + continue; + + /* result from parametrized test case */ igt_fail_on_f(strcmp(r->suite_name, suite_name), "suite_name expected: %s, got: %s\n", suite_name, r->suite_name); @@ -1009,7 +1081,9 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) kunit_result_free(&r, &suite_name, &case_name); - } while (ret == -EINPROGRESS); + if (igt_debug_on(ret != -EINPROGRESS)) + break; + } kunit_results_free(&results, &suite_name, &case_name); @@ -1035,7 +1109,8 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) igt_skip_on(modprobe.err); igt_skip_on(igt_kernel_tainted(&taints)); - igt_skip_on_f(ret, "KTAP parser failed\n"); + if (ret != -EINPROGRESS) + igt_skip_on_f(ret, "KTAP parser failed\n"); } /** @@ -1049,7 +1124,8 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts) void igt_kunit(const char *module_name, const char *name, const char *opts) { struct igt_ktest tst = { .kmsg = -1, }; - + const char *filter = name; + IGT_LIST_HEAD(tests); /* * If the caller (an IGT test) provides no subtest name then we @@ -1074,6 +1150,15 @@ void igt_kunit(const char *module_name, const char *name, const char *opts) igt_skip_on(igt_ktest_init(&tst, module_name)); igt_skip_on(igt_ktest_begin(&tst)); + + /* + * Since we need to load kunit base module with specific + * options in order to get a list of test cases, make + * sure that the module is not loaded. However, since + * unload may fail if kunit base module is not loaded, + * ignore any failures, we'll fail later if still loaded. + */ + igt_ignore_warn(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE)); } /* @@ -1083,11 +1168,21 @@ void igt_kunit(const char *module_name, const char *name, const char *opts) * proper namespace for dynamic subtests, with is required for CI * and for documentation. */ - igt_subtest_with_dynamic(name) - __igt_kunit(&tst, name, opts); + igt_subtest_with_dynamic(name) { + kunit_get_tests(&tests, &tst, filter, opts); + igt_skip_on(igt_list_empty(&tests)); + + __igt_kunit(&tst, name, opts, &tests); + } + + igt_fixture { + char *suite_name = NULL, *case_name = NULL; + + kunit_results_free(&tests, &suite_name, &case_name); - igt_fixture igt_ktest_end(&tst); + igt_debug_on(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE)); + } igt_ktest_fini(&tst); } -- 2.42.0