From: Ville Syrjälä <ville.syrj...@linux.intel.com>

We normally use 10Khz units when describing DP link frequency.
Have intel_fdi_link_freq() return the same units. I always get confused
when the units start to be totally different.

Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c 
b/drivers/gpu/drm/i915/intel_display.c
index f19e6ea..a366e91 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -81,14 +81,14 @@ intel_pch_rawclk(struct drm_device *dev)
        return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
 }
 
-static inline u32 /* units of 100MHz */
+static inline int /* units of 10kHz */
 intel_fdi_link_freq(struct drm_device *dev)
 {
        if (IS_GEN5(dev)) {
                struct drm_i915_private *dev_priv = dev->dev_private;
-               return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+               return ((I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 
2) * 10000;
        } else
-               return 27;
+               return 270000;
 }
 
 static const intel_limit_t intel_limits_i8xx_dac = {
@@ -4521,14 +4521,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc 
*intel_crtc,
        bool setup_ok, needs_recompute = false;
 
 retry:
-       /* FDI is a binary signal running at ~2.7GHz, encoding
-        * each output octet as 10 bits. The actual frequency
-        * is stored as a divider into a 100MHz clock, and the
-        * mode pixel clock is stored in units of 1KHz.
-        * Hence the bw of each lane in terms of the mode signal
-        * is:
-        */
-       link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+       link_bw = intel_fdi_link_freq(dev);
 
        fdi_dotclock = adjusted_mode->crtc_clock;
 
@@ -8069,7 +8062,7 @@ static void ironlake_pch_clock_get(struct intel_crtc 
*crtc,
         * get_config() function.
         */
        pipe_config->adjusted_mode.crtc_clock =
-               intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
+               intel_dotclock_calculate(intel_fdi_link_freq(dev),
                                         &pipe_config->fdi_m_n);
 }
 
-- 
1.8.3.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to