From: Ville Syrjälä <[email protected]> Follow the modern style and use REG_BIT() & co. for the analog port register definitions.
Also throw out the ADPA_DPMS_... stuff as that's just an alias for the sync off bits. Signed-off-by: Ville Syrjälä <[email protected]> --- drivers/gpu/drm/i915/display/intel_crt.c | 4 +- drivers/gpu/drm/i915/i915_reg.h | 69 ++++++++++++------------ 2 files changed, 35 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c index 134a4e6a4ac0..73d5332cf103 100644 --- a/drivers/gpu/drm/i915/display/intel_crt.c +++ b/drivers/gpu/drm/i915/display/intel_crt.c @@ -91,9 +91,9 @@ bool intel_crt_port_enabled(struct intel_display *display, /* asserts want to know the pipe even if the port is disabled */ if (HAS_PCH_CPT(dev_priv)) - *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT; + *pipe = REG_FIELD_GET(ADPA_PIPE_SEL_MASK_CPT, val); else - *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT; + *pipe = REG_FIELD_GET(ADPA_PIPE_SEL_MASK, val); return val & ADPA_DAC_ENABLE; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f0757c4491f1..f233fc32e45c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1151,43 +1151,40 @@ #define ADPA _MMIO(0x61100) #define PCH_ADPA _MMIO(0xe1100) #define VLV_ADPA _MMIO(VLV_DISPLAY_BASE + 0x61100) -#define ADPA_DAC_ENABLE (1 << 31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SEL_SHIFT 30 -#define ADPA_PIPE_SEL_MASK (1 << 30) -#define ADPA_PIPE_SEL(pipe) ((pipe) << 30) -#define ADPA_PIPE_SEL_SHIFT_CPT 29 -#define ADPA_PIPE_SEL_MASK_CPT (3 << 29) -#define ADPA_PIPE_SEL_CPT(pipe) ((pipe) << 29) +#define ADPA_DAC_ENABLE REG_BIT(31) +#define ADPA_PIPE_SEL_MASK REG_BIT(30) +#define ADPA_PIPE_SEL(pipe) REG_FIELD_PREP(ADPA_PIPE_SEL_MASK, (pipe)) +#define ADPA_PIPE_SEL_MASK_CPT REG_GENMASK(30, 29) +#define ADPA_PIPE_SEL_CPT(pipe) REG_FIELD_PREP(ADPA_PIPE_SEL_MASK_CPT, (pipe)) #define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ -#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0 << 24) -#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3 << 24) -#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3 << 24) -#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2 << 24) -#define ADPA_CRT_HOTPLUG_ENABLE (1 << 23) -#define ADPA_CRT_HOTPLUG_PERIOD_64 (0 << 22) -#define ADPA_CRT_HOTPLUG_PERIOD_128 (1 << 22) -#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0 << 21) -#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1 << 21) -#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0 << 20) -#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1 << 20) -#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0 << 18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1 << 18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2 << 18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3 << 18) -#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0 << 17) -#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1 << 17) -#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1 << 16) -#define ADPA_USE_VGA_HVPOLARITY (1 << 15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1 << 10) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1 << 11) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3) -#define ADPA_HSYNC_ACTIVE_LOW 0 +#define ADPA_CRT_HOTPLUG_MONITOR_MASK REG_GENMASK(25, 24) +#define ADPA_CRT_HOTPLUG_MONITOR_NONE REG_FIELD_PREP(ADPA_CRT_HOTPLUG_MONITOR_MASK, 0) +#define ADPA_CRT_HOTPLUG_MONITOR_COLOR REG_FIELD_PREP(ADPA_CRT_HOTPLUG_MONITOR_MASK, 3) +#define ADPA_CRT_HOTPLUG_MONITOR_MONO REG_FIELD_PREP(ADPA_CRT_HOTPLUG_MONITOR_MASK, 2) +#define ADPA_CRT_HOTPLUG_ENABLE REG_BIT(23) +#define ADPA_CRT_HOTPLUG_PERIOD_MASK REG_BIT(22) +#define ADPA_CRT_HOTPLUG_PERIOD_64 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_PERIOD_MASK, 0) +#define ADPA_CRT_HOTPLUG_PERIOD_128 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_PERIOD_MASK, 1) +#define ADPA_CRT_HOTPLUG_WARMUP_MASK REG_BIT(21) +#define ADPA_CRT_HOTPLUG_WARMUP_5MS REG_FIELD_PREP(ADPA_CRT_HOTPLUG_WARMUP_MASK, 0) +#define ADPA_CRT_HOTPLUG_WARMUP_10MS REG_FIELD_PREP(ADPA_CRT_HOTPLUG_WARMUP_MASK, 1) +#define ADPA_CRT_HOTPLUG_SAMPLE_MASK REG_BIT(20) +#define ADPA_CRT_HOTPLUG_SAMPLE_2S REG_FIELD_PREP(ADPA_CRT_HOTPLUG_SAMPLE_MASK, 0) +#define ADPA_CRT_HOTPLUG_SAMPLE_4S REG_FIELD_PREP(ADPA_CRT_HOTPLUG_SAMPLE_MASK, 1) +#define ADPA_CRT_HOTPLUG_VOLTAGE_MASK REG_GENMASK(19, 18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_40 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLTAGE_MASK, 0) +#define ADPA_CRT_HOTPLUG_VOLTAGE_50 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLTAGE_MASK, 1) +#define ADPA_CRT_HOTPLUG_VOLTAGE_60 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLTAGE_MASK, 2) +#define ADPA_CRT_HOTPLUG_VOLTAGE_70 REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLTAGE_MASK, 3) +#define ADPA_CRT_HOTPLUG_VOLREF_MASK REG_BIT(17) +#define ADPA_CRT_HOTPLUG_VOLREF_325MV REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLREF_MASK, 0) +#define ADPA_CRT_HOTPLUG_VOLREF_475MV REG_FIELD_PREP(ADPA_CRT_HOTPLUG_VOLREF_MASK, 1) +#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER REG_BIT(16) +#define ADPA_USE_VGA_HVPOLARITY REG_BIT(15) +#define ADPA_HSYNC_CNTL_DISABLE REG_BIT(11) +#define ADPA_VSYNC_CNTL_DISABLE REG_BIT(10) +#define ADPA_VSYNC_ACTIVE_HIGH REG_BIT(4) +#define ADPA_HSYNC_ACTIVE_HIGH REG_BIT(3) /* Hotplug control (945+ only) */ #define PORT_HOTPLUG_EN(dev_priv) _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61110) -- 2.45.2
