When trying to determine whether RPS is working as intended, more
information is better. In particular, what interrupts are being
generated and the various thresholds for generating them.
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
---
drivers/gpu/drm/i915/i915_debugfs.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index e0c991122dd2..4a2bcadadaf8 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1095,6 +1095,7 @@ static int i915_cur_delayinfo(struct seq_file *m, void
*unused)
u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+ u32 rpmodectl, rpinclimit, rpdeclimit;
u32 rpstat, cagf, reqf;
u32 rpupei, rpcurup, rpprevup;
u32 rpdownei, rpcurdown, rpprevdown;
@@ -1115,6 +1116,10 @@ static int i915_cur_delayinfo(struct seq_file *m, void
*unused)
reqf >>= 25;
reqf *= GT_FREQUENCY_MULTIPLIER;
+ rpmodectl = I915_READ(GEN6_RP_CONTROL);
+ rpinclimit = I915_READ(GEN6_RP_UP_THRESHOLD);
+ rpdeclimit = I915_READ(GEN6_RP_DOWN_THRESHOLD);
+
rpstat = I915_READ(GEN6_RPSTAT1);
rpupei = I915_READ(GEN6_RP_CUR_UP_EI);
rpcurup = I915_READ(GEN6_RP_CUR_UP);
@@ -1131,14 +1136,23 @@ static int i915_cur_delayinfo(struct seq_file *m, void
*unused)
gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
mutex_unlock(&dev->struct_mutex);
+ seq_printf(m, "PM IER=0x%08x IMR=0x%08x ISR=0x%08x IIR=0x%08x,
MASK=0x%08x\n",
+ I915_READ(GEN6_PMIER),
+ I915_READ(GEN6_PMIMR),
+ I915_READ(GEN6_PMISR),
+ I915_READ(GEN6_PMIIR),
+ I915_READ(GEN6_PMINTRMSK));
seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
- seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat);
seq_printf(m, "Render p-state ratio: %d\n",
(gt_perf_status & 0xff00) >> 8);
seq_printf(m, "Render p-state VID: %d\n",
gt_perf_status & 0xff);
seq_printf(m, "Render p-state limit: %d\n",
rp_state_limits & 0xff);
+ seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat);
+ seq_printf(m, "RPMODECTL: 0x%08x\n", rpmodectl);
+ seq_printf(m, "RPINCLIMIT: 0x%08x\n", rpinclimit);
+ seq_printf(m, "RPDECLIMIT: 0x%08x\n", rpdeclimit);
seq_printf(m, "RPNSWREQ: %dMHz\n", reqf);
seq_printf(m, "CAGF: %dMHz\n", cagf);
seq_printf(m, "RP CUR UP EI: %dus\n", rpupei &
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
