On Thu, 2025-10-23 at 13:46 +0530, Ankit Nautiyal wrote:
> Currently the EMP_AS_SDP_TL is set to vrr.vsync_start which is
> incorrect.
>
> As per Bspec:71197 the transmission line must be within the SCL +
> guardband region. Before guardband optimization, guradband was same
> as
> vblank length so EMP_AS_SDP_TL set with vrr.sync_start was falling in
> this region and it was not giving an issue.
>
> Now with optimized guardband, this is falling outside the SCL +
> guardband region and since the same transmission line is used by VSC
> SDP
> also, this results in PSR timeout issues.
>
> Further restrictions on the position of the transmission line:
> For DP/eDP, if there is a set context latency (SCL) window, then it
> cannot be the first line of SCL
> For DP/eDP, if there is no SCL window, then it cannot be the first
> line of
> the Delayed V. Blank
>
> Fix the EMP_AS_SDP_TL to VTOTAL - (delayed vblank_start - SCL + 1)
> Internally the HW computes the value as VTOTAL - EMP_AS_SDP_TL.
>
> Fixes: e1123e617e51 ("drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS
> SDP")
> Cc: Ankit Nautiyal <[email protected]>
> Cc: Jouni Högander <[email protected]>
> Signed-off-by: Ankit Nautiyal <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
> ---
> drivers/gpu/drm/i915/display/intel_vrr.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c
> b/drivers/gpu/drm/i915/display/intel_vrr.c
> index 92fb72b56f16..dd81d2133aba 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> @@ -655,18 +655,24 @@ void
> intel_vrr_set_db_point_and_transmission_line(const struct
> intel_crtc_state
> {
> struct intel_display *display =
> to_intel_display(crtc_state);
> enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> + const struct drm_display_mode *adjusted_mode = &crtc_state-
> >hw.adjusted_mode;
> + int transmission_line;
>
> /*
> * For BMG and LNL+ onwards the EMP_AS_SDP_TL is used for
> programming
> * double buffering point and transmission line for VRR
> packets for
> * HDMI2.1/DP/eDP/DP->HDMI2.1 PCON.
> * Since currently we support VRR only for DP/eDP, so this
> is programmed
> - * to for Adaptive Sync SDP to Vsync start.
> + * for Adaptive Sync SDP.
> */
> - if (DISPLAY_VERx100(display) == 1401 || DISPLAY_VER(display)
> >= 20)
> + if (DISPLAY_VERx100(display) == 1401 || DISPLAY_VER(display)
> >= 20) {
> + transmission_line = adjusted_mode->crtc_vtotal -
> (adjusted_mode->crtc_vblank_start -
> +
> crtc_state->set_context_latency +
> +
> 1);
> intel_de_write(display,
> EMP_AS_SDP_TL(display,
> cpu_transcoder),
> - EMP_AS_SDP_DB_TL(crtc_state-
> >vrr.vsync_start));
> + EMP_AS_SDP_DB_TL(transmission_line));
> + }
> }
>
> static int intel_vrr_hw_vmin(const struct intel_crtc_state
> *crtc_state)
