On Tue, 2026-01-27 at 14:18 +0200, Ville Syrjälä wrote:
> On Tue, Jan 27, 2026 at 01:13:45PM +0200, Vinod Govindapillai wrote:
> > Pixel normalizer is enabled with normalization factor as 1.0 for
> > FP16 formats in order to support FBC for those formats in xe3p_lpd.
> > Previously pixel normalizer gets disabled during the plane disable
> > routine. But there could be plane format settings without
> > explicitly
> > calling the plane disable in-between and we could endup keeping the
> > pixel normalizer enabled for formats which we don't require that.
> > This is causing crc mismatches in yuv formats and FIFO underruns in
> > planar formats like NV12.
> > 
> > Fix this by updating the pixel normalizer configuration based on
> > the
> > pixel formats explicitly during the plane settings arm calls itself
> > - enable it for FP16 and disable it for other formats in HDR
> > capable
> > planes. To avoid redundancies in these updates, normalization
> > factor
> > between old and new plane states are compared before the update.
> > The
> > function to check validity of the fp16 formats for fbc is now
> > updated
> > to return the normalization factor as 1.0 in case of fp16 formats
> > and
> > 0 in other cases.
> 
> This looks incredibly complex for just writing a single register.
> I think it should be just somehting like:
> 
> static u32 pixel_normalizer_val()
> {
>       if (!need_pixel_normalizer())
>               return 0;
> 
>       return ENABLE | FACTOR;
> }
> 
> plane_update(..)
> {
>       ...
>       if (HAS_PIXEL_NORMALIZER())
>               write(PIXEL_NOFMRALIZER, pixel_normalizer_val())
>       ...
> }
> 
> plane_disable()
> {
>       ...
>       // do we even need to disable it for disabled planes?
>       if (HAS_PIXEL_NORMALIZER())
>               write(PIXEL_NORMALIZER, 0);
>       ...
> }


Okay. Thanks for the suggestion. This is basically similar to the
revision 1 of this patch!

But before sending another revision, I would like to clarify about
HAS_PIXEL_NORMALIZER(). Pixel normalizer is there even in earlier
versions. We are using this mainly for the FP16 case. So do you agree
to use HAS_FP16_FORMATS instead of HAS_PIXEL_NORMALIZER?

Also normalizer is available for the HDR planes, so will have to use 

if (HAS_FP16_FORMATS(display) && skl_plane_has_fbc(display, fbc_id,
plane->id))
        write(PIXEL_NORMALIZER, val / 0)


BR
Vinod

> 
> > 
> > v2: avoid redundant pixel normalization setting updates
> > 
> > v3: moved the normalization factor definition to intel_fbc.c and
> > some
> >     updates to comments
> > 
> > Fixes: 5298eea7ed20 ("drm/i915/xe3p_lpd: use pixel normalizer for
> > fp16 formats for FBC")
> > Signed-off-by: Vinod Govindapillai <[email protected]>
> > ---
> >  .../drm/i915/display/intel_display_device.h   |  1 +
> >  .../drm/i915/display/intel_display_types.h    |  8 ++
> >  drivers/gpu/drm/i915/display/intel_fbc.c      | 19 ++++-
> >  drivers/gpu/drm/i915/display/intel_fbc.h      |  4 +-
> >  .../drm/i915/display/skl_universal_plane.c    | 82
> > +++++++++++++++----
> >  .../i915/display/skl_universal_plane_regs.h   |  1 -
> >  6 files changed, 92 insertions(+), 23 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_device.h
> > b/drivers/gpu/drm/i915/display/intel_display_device.h
> > index 6c74d6b0cc48..126aa1eeeb6d 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_device.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_device.h
> > @@ -175,6 +175,7 @@ struct intel_display_platforms {
> >  #define HAS_DSC_MST(__display)             (DISPLAY_VER(__display) >=
> > 12 && HAS_DSC(__display))
> >  #define
> > HAS_FBC(__display)          (DISPLAY_RUNTIME_INFO(__display)->fbc_mask != 0)
> >  #define HAS_FBC_DIRTY_RECT(__display)      (DISPLAY_VER(__display) >=
> > 30)
> > +#define
> > HAS_FBC_FP16_FORMATS(__display)     (DISPLAY_VER(__display) >= 35)
> >  #define HAS_FBC_SYS_CACHE(__display)       (DISPLAY_VER(__display) >=
> > 35 && !(__display)->platform.dgfx)
> >  #define
> > HAS_FPGA_DBG_UNCLAIMED(__display)   (DISPLAY_INFO(__display)->has_fpga_dbg)
> >  #define HAS_FW_BLC(__display)              (DISPLAY_VER(__display) >=
> > 3)
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index e6298279dc89..92bce232b2c5 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -686,6 +686,14 @@ struct intel_plane_state {
> >     unsigned long flags;
> >  #define PLANE_HAS_FENCE BIT(0)
> >  
> > +   /* xe3p_lpd+ */
> > +   struct {
> > +           /* In half-precision floating-point format. 0x3c00
> > (1.0) for fp16 formats */
> > +           unsigned int factor;
> > +           /* update is needed if factor differs between old
> > and new plane states */
> > +           bool needs_update;
> > +   } pixel_normalizer;
> > +
> >     struct intel_fb_view view;
> >  
> >     /* for legacy cursor fb unpin */
> > diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c
> > b/drivers/gpu/drm/i915/display/intel_fbc.c
> > index 1f3f5237a1c2..f9474e7741c8 100644
> > --- a/drivers/gpu/drm/i915/display/intel_fbc.c
> > +++ b/drivers/gpu/drm/i915/display/intel_fbc.c
> > @@ -71,6 +71,9 @@
> >  
> >  #define FBC_SYS_CACHE_ID_NONE      I915_MAX_FBCS
> >  
> > +/* Pixel normalization factor 1.0 in half-precision floating-point
> > format */
> > +#define NORM_FACTOR_1_0_IN_HALF_PRECISION_FP               0x3c00
> > +
> >  struct intel_fbc_funcs {
> >     void (*activate)(struct intel_fbc *fbc);
> >     void (*deactivate)(struct intel_fbc *fbc);
> > @@ -1215,13 +1218,21 @@ static bool
> > xe3p_lpd_fbc_pixel_format_is_valid(const struct intel_plane_state
> > *p
> >     }
> >  }
> >  
> > -bool
> > -intel_fbc_is_enable_pixel_normalizer(const struct
> > intel_plane_state *plane_state)
> > +unsigned int
> > +intel_fbc_normalization_factor(const struct intel_plane_state
> > *plane_state)
> >  {
> >     struct intel_display *display =
> > to_intel_display(plane_state);
> >  
> > -   return DISPLAY_VER(display) >= 35 &&
> > -          xe3p_lpd_fbc_fp16_format_is_valid(plane_state);
> > +   /*
> > +    * In order to have FBC for fp16 formats pixel normalizer
> > block must be
> > +    * active. For FP16 formats, use normalization factor as
> > 1.0 and enable
> > +    * the block.
> > +    */
> > +   if (HAS_FBC_FP16_FORMATS(display) &&
> > +       xe3p_lpd_fbc_fp16_format_is_valid(plane_state))
> > +           return NORM_FACTOR_1_0_IN_HALF_PRECISION_FP;
> > +
> > +   return 0;
> >  }
> >  
> >  static bool pixel_format_is_valid(const struct intel_plane_state
> > *plane_state)
> > diff --git a/drivers/gpu/drm/i915/display/intel_fbc.h
> > b/drivers/gpu/drm/i915/display/intel_fbc.h
> > index f0255ddae2b6..b5888e98a659 100644
> > --- a/drivers/gpu/drm/i915/display/intel_fbc.h
> > +++ b/drivers/gpu/drm/i915/display/intel_fbc.h
> > @@ -56,7 +56,7 @@ void intel_fbc_prepare_dirty_rect(struct
> > intel_atomic_state *state,
> >                               struct intel_crtc *crtc);
> >  void intel_fbc_dirty_rect_update_noarm(struct intel_dsb *dsb,
> >                                    struct intel_plane *plane);
> > -bool
> > -intel_fbc_is_enable_pixel_normalizer(const struct
> > intel_plane_state *plane_state);
> > +unsigned int
> > +intel_fbc_normalization_factor(const struct intel_plane_state
> > *plane_state);
> >  
> >  #endif /* __INTEL_FBC_H__ */
> > diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > index b3d41705448a..05c227913b8d 100644
> > --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > @@ -891,20 +891,49 @@ static void
> > icl_plane_disable_sel_fetch_arm(struct intel_dsb *dsb,
> >     intel_de_write_dsb(display, dsb, SEL_FETCH_PLANE_CTL(pipe,
> > plane->id), 0);
> >  }
> >  
> > -static void x3p_lpd_plane_update_pixel_normalizer(struct intel_dsb
> > *dsb,
> > -                                             struct
> > intel_plane *plane,
> > -                                             bool enable)
> > +static void xe3p_lpd_plane_disable_pixel_normalizer(struct
> > intel_dsb *dsb,
> > +                                               struct
> > intel_plane *plane)
> >  {
> >     struct intel_display *display = to_intel_display(plane);
> >     enum intel_fbc_id fbc_id = skl_fbc_id_for_pipe(plane-
> > >pipe);
> > -   u32 val;
> > +   const struct intel_plane_state *plane_state =
> > +           to_intel_plane_state(plane->base.state);
> > +
> > +   if (!HAS_FBC_FP16_FORMATS(display))
> > +           return;
> > +
> > +   if (!skl_plane_has_fbc(display, fbc_id, plane->id))
> > +           return;
> > +
> > +   if (!plane_state->pixel_normalizer.factor)
> > +           return;
> > +
> > +   intel_de_write_dsb(display, dsb,
> > +                      PLANE_PIXEL_NORMALIZE(plane->pipe,
> > plane->id), 0);
> > +}
> > +
> > +static void xe3p_lpd_plane_update_pixel_normalizer(struct
> > intel_dsb *dsb,
> > +                                              struct
> > intel_plane *plane)
> > +{
> > +   struct intel_display *display = to_intel_display(plane);
> > +   enum intel_fbc_id fbc_id = skl_fbc_id_for_pipe(plane-
> > >pipe);
> > +   const struct intel_plane_state *plane_state =
> > +           to_intel_plane_state(plane->base.state);
> > +   u32 val = 0;
> > +
> > +   if (!HAS_FBC_FP16_FORMATS(display))
> > +           return;
> >  
> > -   /* Only HDR planes have pixel normalizer and don't matter
> > if no FBC */
> > +   /* Only HDR planes have pixel normalizer and don't matter
> > if FBC is fused off */
> >     if (!skl_plane_has_fbc(display, fbc_id, plane->id))
> >             return;
> >  
> > -   val = enable ?
> > PLANE_PIXEL_NORMALIZE_NORM_FACTOR(PLANE_PIXEL_NORMALIZE_NORM_FACTOR
> > _1_0) |
> > -                  PLANE_PIXEL_NORMALIZE_ENABLE : 0;
> > +   if (!plane_state->pixel_normalizer.needs_update)
> > +           return;
> > +
> > +   if (plane_state->pixel_normalizer.factor)
> > +           val =
> > PLANE_PIXEL_NORMALIZE_NORM_FACTOR(plane_state-
> > >pixel_normalizer.factor) |
> > +                 PLANE_PIXEL_NORMALIZE_ENABLE;
> >  
> >     intel_de_write_dsb(display, dsb,
> >                        PLANE_PIXEL_NORMALIZE(plane->pipe,
> > plane->id), val);
> > @@ -926,8 +955,7 @@ icl_plane_disable_arm(struct intel_dsb *dsb,
> >  
> >     icl_plane_disable_sel_fetch_arm(dsb, plane, crtc_state);
> >  
> > -   if (DISPLAY_VER(display) >= 35)
> > -           x3p_lpd_plane_update_pixel_normalizer(dsb, plane,
> > false);
> > +   xe3p_lpd_plane_disable_pixel_normalizer(dsb, plane);
> >  
> >     intel_de_write_dsb(display, dsb, PLANE_CTL(pipe,
> > plane_id), 0);
> >     intel_de_write_dsb(display, dsb, PLANE_SURF(pipe,
> > plane_id), 0);
> > @@ -1674,13 +1702,7 @@ icl_plane_update_arm(struct intel_dsb *dsb,
> >  
> >     intel_color_plane_commit_arm(dsb, plane_state);
> >  
> > -   /*
> > -    * In order to have FBC for fp16 formats pixel normalizer
> > block must be
> > -    * active. Check if pixel normalizer block need to be
> > enabled for FBC.
> > -    * If needed, use normalization factor as 1.0 and enable
> > the block.
> > -    */
> > -   if (intel_fbc_is_enable_pixel_normalizer(plane_state))
> > -           x3p_lpd_plane_update_pixel_normalizer(dsb, plane,
> > true);
> > +   xe3p_lpd_plane_update_pixel_normalizer(dsb, plane);
> >  
> >     /*
> >      * The control register self-arms if the plane was
> > previously
> > @@ -2350,6 +2372,32 @@ static void clip_damage(struct
> > intel_plane_state *plane_state)
> >     drm_rect_intersect(damage, &src);
> >  }
> >  
> > +static void check_pixel_normalizer(struct intel_plane_state
> > *plane_state)
> > +{
> > +   struct intel_display *display =
> > to_intel_display(plane_state);
> > +   struct intel_plane *plane = to_intel_plane(plane_state-
> > >uapi.plane);
> > +   struct intel_atomic_state *state =
> > +           to_intel_atomic_state(plane_state->uapi.state);
> > +   const struct intel_plane_state *old_plane_state =
> > +           intel_atomic_get_old_plane_state(state, plane);
> > +
> > +   if (!HAS_FBC_FP16_FORMATS(display))
> > +           return;
> > +
> > +   plane_state->pixel_normalizer.factor =
> > +           intel_fbc_normalization_factor(plane_state);
> > +
> > +   /*
> > +    * In case of no old state to compare, better to force
> > update the pixel
> > +    * normalizer settings.
> > +    */
> > +   plane_state->pixel_normalizer.needs_update = true;
> > +   if (old_plane_state && old_plane_state->hw.fb)
> > +           plane_state->pixel_normalizer.needs_update =
> > +                   plane_state->pixel_normalizer.factor !=
> > +                   intel_fbc_normalization_factor(old_plane_s
> > tate);
> > +}
> > +
> >  static int skl_plane_check(struct intel_crtc_state *crtc_state,
> >                        struct intel_plane_state *plane_state)
> >  {
> > @@ -2400,6 +2448,8 @@ static int skl_plane_check(struct
> > intel_crtc_state *crtc_state,
> >  
> >     check_protection(plane_state);
> >  
> > +   check_pixel_normalizer(plane_state);
> > +
> >     /* HW only has 8 bits pixel precision, disable plane if
> > invisible */
> >     if (!(plane_state->hw.alpha >> 8)) {
> >             plane_state->uapi.visible = false;
> > diff --git
> > a/drivers/gpu/drm/i915/display/skl_universal_plane_regs.h
> > b/drivers/gpu/drm/i915/display/skl_universal_plane_regs.h
> > index 6fd4da9f63cf..651f3557b576 100644
> > --- a/drivers/gpu/drm/i915/display/skl_universal_plane_regs.h
> > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane_regs.h
> > @@ -580,6 +580,5 @@
> >  #define  
> > PLANE_PIXEL_NORMALIZE_ENABLE                        REG_BIT(31)
> >  #define  
> > PLANE_PIXEL_NORMALIZE_NORM_FACTOR_MASK      REG_GENMASK(15, 0)
> >  #define  
> > PLANE_PIXEL_NORMALIZE_NORM_FACTOR(val)      
> > REG_FIELD_PREP(PLANE_PIXEL_NORMALIZE_NORM_FACTOR_MASK,(val))
> > -#define  
> > PLANE_PIXEL_NORMALIZE_NORM_FACTOR_1_0               0x3c00
> >  
> >  #endif /* __SKL_UNIVERSAL_PLANE_REGS_H__ */
> > -- 
> > 2.43.0
> 

Reply via email to