> Rendering and display are quite separate in the hardware and in the
> driver. Perhaps you do not mean "rendering" here? Perhaps it can be used
> for rendering but not display?
Yeah, it can be used for rendering but not display, sorry for the wording.
> Okay, so perhaps there's no eDP connected. But what about the other
> connectors on the iGPU? What about everything else in the display
> hardware?
You cant use the iGPU to drive the display on any hardware (including external
displays).
> If you can figure out that it's specifically link training that fails (a
> dmesg would be useful to show this) there clearly is display hardware,
> right?
As said the iGPU cant drive the display on all monitors (even on macOS), but
still heres the dmesg before this patch:
[ 5.095489] i915 0000:00:02.0: [drm] Found cometlake (device ID 9bc8)
integrated display version 9.00 stepping N/A
[ 5.096061] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 5.096102] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 5.099214] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting
0xaa55, got 0xffff
[ 5.099217] i915 0000:00:02.0: [drm] Failed to find VBIOS tables (VBT)
[ 5.099324] i915 0000:00:02.0: vgaarb: VGA decodes changed:
olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.100960] i915 0000:00:02.0: [drm] Finished loading DMC firmware
i915/kbl_dmc_ver1_04.bin (v1.4)
[ 5.832214] i915 0000:00:02.0: [drm] [ENCODER:105:DDI A/PHY A] failed to
retrieve link info, disabling eDP
[ 5.835756] i915 0000:00:02.0: [drm] Registered 3 planes with drm panic
[ 6.428455] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 6.722404] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
> There's at least three levels where this could be handled, depending on
> details:
>
> - Display probe (the patch at hand). Assumes there's no display
> hardware, at all. The driver doesn't touch the hardware, which
> continues to consume power, it's not put in low power states. Not
> optimal if there actually is display hardware.
>
> - Display disable. See intel_display_device_enabled(). The driver takes
> over the hardware, puts it to sleep, but prevents all connectors from
> being connected.
>
> - eDP disable. Add a quirk somewhere to enforce eDP is disconnected, but
> other connectors can be used.
The main reason I sent this patch is that after i915 trys to probe the display,
the dGPU (amdgpu) is no longer able to detect the internal display,
resulting in a black screen.
> It would be quite useful to indicate the PCI ID of the device in
> question.
00:02.0 VGA compatible controller [0300]: Intel Corporation CometLake-S GT2
[UHD Graphics 630] [8086:9bc8] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Apple Inc. CometLake-S GT2 [UHD Graphics 630] [106b:ffff]
