On Tue, 29 Apr 2014 23:30:48 +0300
Jani Nikula <jani.nik...@intel.com> wrote:

> Somehow a few functions have been dropped in the middle of backlight
> code. Move them around. No functional changes.
> 
> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_panel.c | 150 
> ++++++++++++++++++-------------------
>  1 file changed, 75 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_panel.c 
> b/drivers/gpu/drm/i915/intel_panel.c
> index 44ad415e3706..776249bab488 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -42,6 +42,59 @@ intel_fixed_panel_mode(const struct drm_display_mode 
> *fixed_mode,
>       drm_mode_set_crtcinfo(adjusted_mode, 0);
>  }
>  
> +/**
> + * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> + * @dev: drm device
> + * @fixed_mode : panel native mode
> + * @connector: LVDS/eDP connector
> + *
> + * Return downclock_avail
> + * Find the reduced downclock for LVDS/eDP in EDID.
> + */
> +struct drm_display_mode *
> +intel_find_panel_downclock(struct drm_device *dev,
> +                     struct drm_display_mode *fixed_mode,
> +                     struct drm_connector *connector)
> +{
> +     struct drm_display_mode *scan, *tmp_mode;
> +     int temp_downclock;
> +
> +     temp_downclock = fixed_mode->clock;
> +     tmp_mode = NULL;
> +
> +     list_for_each_entry(scan, &connector->probed_modes, head) {
> +             /*
> +              * If one mode has the same resolution with the fixed_panel
> +              * mode while they have the different refresh rate, it means
> +              * that the reduced downclock is found. In such
> +              * case we can set the different FPx0/1 to dynamically select
> +              * between low and high frequency.
> +              */
> +             if (scan->hdisplay == fixed_mode->hdisplay &&
> +                 scan->hsync_start == fixed_mode->hsync_start &&
> +                 scan->hsync_end == fixed_mode->hsync_end &&
> +                 scan->htotal == fixed_mode->htotal &&
> +                 scan->vdisplay == fixed_mode->vdisplay &&
> +                 scan->vsync_start == fixed_mode->vsync_start &&
> +                 scan->vsync_end == fixed_mode->vsync_end &&
> +                 scan->vtotal == fixed_mode->vtotal) {
> +                     if (scan->clock < temp_downclock) {
> +                             /*
> +                              * The downclock is already found. But we
> +                              * expect to find the lower downclock.
> +                              */
> +                             temp_downclock = scan->clock;
> +                             tmp_mode = scan;
> +                     }
> +             }
> +     }
> +
> +     if (temp_downclock < fixed_mode->clock)
> +             return drm_mode_duplicate(dev, tmp_mode);
> +     else
> +             return NULL;
> +}
> +
>  /* adjusted_mode has been preset to be the panel's fixed mode */
>  void
>  intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
> @@ -323,6 +376,28 @@ out:
>       pipe_config->gmch_pfit.lvds_border_bits = border;
>  }
>  
> +enum drm_connector_status
> +intel_panel_detect(struct drm_device *dev)
> +{
> +     struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +     /* Assume that the BIOS does not lie through the OpRegion... */
> +     if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> +             return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> +                     connector_status_connected :
> +                     connector_status_disconnected;
> +     }
> +
> +     switch (i915.panel_ignore_lid) {
> +     case -2:
> +             return connector_status_connected;
> +     case -1:
> +             return connector_status_disconnected;
> +     default:
> +             return connector_status_unknown;
> +     }
> +}
> +
>  static u32 intel_panel_compute_brightness(struct intel_connector *connector,
>                                         u32 val)
>  {
> @@ -795,28 +870,6 @@ void intel_panel_enable_backlight(struct intel_connector 
> *connector)
>       spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
>  }
>  
> -enum drm_connector_status
> -intel_panel_detect(struct drm_device *dev)
> -{
> -     struct drm_i915_private *dev_priv = dev->dev_private;
> -
> -     /* Assume that the BIOS does not lie through the OpRegion... */
> -     if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> -             return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> -                     connector_status_connected :
> -                     connector_status_disconnected;
> -     }
> -
> -     switch (i915.panel_ignore_lid) {
> -     case -2:
> -             return connector_status_connected;
> -     case -1:
> -             return connector_status_disconnected;
> -     default:
> -             return connector_status_unknown;
> -     }
> -}
> -
>  #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
>  static int intel_backlight_device_update_status(struct backlight_device *bd)
>  {
> @@ -1103,59 +1156,6 @@ void intel_panel_destroy_backlight(struct 
> drm_connector *connector)
>       intel_backlight_device_unregister(intel_connector);
>  }
>  
> -/**
> - * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> - * @dev: drm device
> - * @fixed_mode : panel native mode
> - * @connector: LVDS/eDP connector
> - *
> - * Return downclock_avail
> - * Find the reduced downclock for LVDS/eDP in EDID.
> - */
> -struct drm_display_mode *
> -intel_find_panel_downclock(struct drm_device *dev,
> -                     struct drm_display_mode *fixed_mode,
> -                     struct drm_connector *connector)
> -{
> -     struct drm_display_mode *scan, *tmp_mode;
> -     int temp_downclock;
> -
> -     temp_downclock = fixed_mode->clock;
> -     tmp_mode = NULL;
> -
> -     list_for_each_entry(scan, &connector->probed_modes, head) {
> -             /*
> -              * If one mode has the same resolution with the fixed_panel
> -              * mode while they have the different refresh rate, it means
> -              * that the reduced downclock is found. In such
> -              * case we can set the different FPx0/1 to dynamically select
> -              * between low and high frequency.
> -              */
> -             if (scan->hdisplay == fixed_mode->hdisplay &&
> -                 scan->hsync_start == fixed_mode->hsync_start &&
> -                 scan->hsync_end == fixed_mode->hsync_end &&
> -                 scan->htotal == fixed_mode->htotal &&
> -                 scan->vdisplay == fixed_mode->vdisplay &&
> -                 scan->vsync_start == fixed_mode->vsync_start &&
> -                 scan->vsync_end == fixed_mode->vsync_end &&
> -                 scan->vtotal == fixed_mode->vtotal) {
> -                     if (scan->clock < temp_downclock) {
> -                             /*
> -                              * The downclock is already found. But we
> -                              * expect to find the lower downclock.
> -                              */
> -                             temp_downclock = scan->clock;
> -                             tmp_mode = scan;
> -                     }
> -             }
> -     }
> -
> -     if (temp_downclock < fixed_mode->clock)
> -             return drm_mode_duplicate(dev, tmp_mode);
> -     else
> -             return NULL;
> -}
> -
>  /* Set up chip specific backlight functions */
>  void intel_panel_init_backlight_funcs(struct drm_device *dev)
>  {

Reviewed-by: Jesse Barnes <jbar...@virtuousgeek.org>

-- 
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to