On Thu, Jul 17, 2014 at 2:53 PM, Paulo Zanoni <przan...@gmail.com> wrote: > 2014-07-17 5:38 GMT-03:00 Daniel Vetter <dan...@ffwll.ch>: >> On Wed, Jul 16, 2014 at 05:06:34PM -0300, Paulo Zanoni wrote: >>> From: Paulo Zanoni <paulo.r.zan...@intel.com> >>> >>> Since we merged runtime PM support for DPMS, it is possible that these >>> functions will be called when the power wells are disabled but a mode >>> is "set", resulting in "failed assertion" and "device suspended while >>> reading register" WARNs. >>> >>> To reproduce the bug: disable all screens using mode unset, do a >>> modeset on one screen, disable it using DPMS, then try to do a mode >>> unset on it again to see the WARNs. >>> >>> Testcase: igt/rpm_rpm/dpms-mode-unset-lpsp >>> Testcase: igt/rpm_rpm/dpms-mode-unset-non-lpsp >>> Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com> >> >> Hm, where do we call these asserts while the pipe is off? Do you have some >> example backtraces at hand? > > Function __intel_set_mode() directly calls intel_crtc_disable(), which > calls both assert_plane_disabled() and assert_cursor_disabled().
Hm, I think it makes more sense to drop the three asserts in there. The modeset state checker will already notice when we've failed to turn off the pipe. And we check cursors and plane state in the enable sequence, too. Since we use these asserts a lot to lock down the precise modeset sequence I actually prefer if they're a bit dumb and don't check the power wells. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
