On Thursday 11 December 2014 05:39 PM, Jani Nikula wrote:
On Fri, 12 Dec 2014, deepa...@linux.intel.com wrote:
From: Deepak S <deepa...@linux.intel.com>
Starting with Cherryview, devices may have a varying number of EU for
a given ID due to creative fusing. Punit support different frequency for
different fuse data. We use this patch to help get total eu enabled and
read the right offset to get RP0
Based upon a patch from Jeff, but reworked to only store eu_total and
avoid sending info to userspace
Signed-off-by: Deepak S <deepa...@linux.intel.com>
Signed-off-by: Jeff McGee <jeff.mc...@intel.com>
---
drivers/gpu/drm/i915/i915_dma.c | 11 +++++++++++
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_reg.h | 11 +++++++++++
3 files changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 887d88f..2bd36b6 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -598,6 +598,17 @@ static void intel_device_info_runtime_init(struct
drm_device *dev)
info->num_pipes = 0;
}
}
+
+ if (IS_CHERRYVIEW(dev)) {
+ u32 fuse, mask_eu;
+
+ fuse = I915_READ(CHV_FUSE_GT);
+ mask_eu = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+ CHV_FGT_EU_DIS_SS0_R1_MASK |
+ CHV_FGT_EU_DIS_SS1_R0_MASK |
+ CHV_FGT_EU_DIS_SS1_R1_MASK);
+ info->eu_total = 16 - hweight32(mask_eu);
+ }
}
/**
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9381504..b58bad4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -624,6 +624,7 @@ struct intel_device_info {
int trans_offsets[I915_MAX_TRANSCODERS];
int palette_offsets[I915_MAX_PIPES];
int cursor_offsets[I915_MAX_PIPES];
+ unsigned int eu_total;
};
#undef DEFINE_FLAG
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 93fdad8..b57cba3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1466,6 +1466,17 @@ enum punit_power_well {
#define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12)
#define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10)
+/* Fuse readout registers for GT */
+#define CHV_FUSE_GT 0x182168
Should this be (VLV_DISPLAY_BASE + 0x2168)?
+#define CHV_FGT_EU_DIS_SS0_R0_SHIFT 16
+#define CHV_FGT_EU_DIS_SS0_R0_MASK (0xf<<CHV_FGT_EU_DIS_SS0_R0_SHIFT)
+#define CHV_FGT_EU_DIS_SS0_R1_SHIFT 20
+#define CHV_FGT_EU_DIS_SS0_R1_MASK (0xf<<CHV_FGT_EU_DIS_SS0_R1_SHIFT)
+#define CHV_FGT_EU_DIS_SS1_R0_SHIFT 24
+#define CHV_FGT_EU_DIS_SS1_R0_MASK (0xf<<CHV_FGT_EU_DIS_SS1_R0_SHIFT)
+#define CHV_FGT_EU_DIS_SS1_R1_SHIFT 28
+#define CHV_FGT_EU_DIS_SS1_R1_MASK (0xf<<CHV_FGT_EU_DIS_SS1_R1_SHIFT)
Please add spaces both sides of "<<" if you end up sending a v2.
Thanks for review.
I will address both the comment and send v2
+
#define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050
#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)
#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
