On Wed, Feb 04, 2015 at 09:26:27PM +0300, Andrey Skvortsov wrote: > On Tue, Feb 03, 2015 at 08:21:52PM +0000, Chris Wilson wrote: > > On Tue, Feb 03, 2015 at 10:15:47PM +0300, Andrey Skvortsov wrote: > > > Hi, > > > > > > tested next-20150202. System boots, but graphic output is broken (empty > > > black screen). > > > Booted five times the same kernel, always got the same result. The system > > > works with 3.19-rc7. > > > > Those two warnings are more or less symptoms of the black screen (well > > the first is just overzealous). More important would be the drm.debug=6 > > dmesg from boot along with the gdm.log (or equivalent) aned Xorg.0.log > > as my guess is that X (or the display server) is crashing. > > Requested logs with drm.debug=6 are attached. lightdm was running after > WARN_ON, but I couldn't restart it. > The command hanged. > > As I booted next-20150202 system crashed several times with a lot of drm_ > calls in the backtrace, but I couldn't catch kernel logs, > because I have not serial port on the laptop. > > If you need to get other information or to test patches, I would be glad to > help.
Right, here it looks like it freezing in intel_get_load_detect_pipe() during the initial configuration probe of X. Given the other crashes, we're back to worring about memory corruption. > [ 29.292333] [drm:intel_tv_detect] [CONNECTOR:33:SVIDEO-1] force=1 > [ 29.292336] [drm:intel_get_load_detect_pipe] [CONNECTOR:33:SVIDEO-1], > [ENCODER:34:TV-34] > [ 29.292339] [drm:intel_get_load_detect_pipe] creating tmp fb for > load-detection > [ 29.292396] [drm:intel_modeset_affected_pipes] set mode pipe masks: > modeset: 1, prepare: 1, disable: 0 > [ 29.292408] [drm:connected_sink_compute_bpp] [CONNECTOR:33:SVIDEO-1] > checking for sink bpp constrains > [ 29.292413] [drm:intel_tv_compute_config] forcing bpc to 8 for TV > [ 29.292416] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, > dithering: 0 > [ 29.292418] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for > pipe A > [ 29.292419] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 29.292421] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 > [ 29.292423] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, > gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 29.292425] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, > link_m: 0, link_n: 0, tu: 0 > [ 29.292428] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, > link_m2: 0, link_n2: 0, tu2: 0 > [ 29.292429] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 29.292431] [drm:intel_dump_pipe_config] requested mode: > [ 29.292433] [drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 > 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 > [ 29.292435] [drm:intel_dump_pipe_config] adjusted mode: > [ 29.292438] [drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 > 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 > [ 29.292440] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1368 > 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0 > [ 29.292442] [drm:intel_dump_pipe_config] port clock: 108000 > [ 29.292444] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 > [ 29.292446] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, > ratios: 0x00000000, lvds border: 0x00000000 > [ 29.292447] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: > 0x00000000, disabled > [ 29.292449] [drm:intel_dump_pipe_config] ips: 0 > [ 29.292451] [drm:intel_dump_pipe_config] double wide: 0 > [ 29.292565] ------------[ cut here ]------------ > [ 29.293785] WARNING: CPU: 0 PID: 53 at include/linux/kref.h:47 > drm_framebuffer_reference+0x5b/0x64 [drm]() > [ 29.295032] Modules linked in: bnep(E) cfg80211(E) cpufreq_stats(E) > cpufreq_powersave(E) cpufreq_userspace(E) cpufreq_conservative(E) nfsd(E) > auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) cdc_wdm(E) cdc_acm(E) > cdc_ether(E) usbnet(E) joydev(E) coretemp(E) kvm_intel(E) kvm(E) i8k(E) > btusb(E) psmouse(E) snd_pcsp(E) i915(E) evdev(E) bluetooth(E) i2c_i801(E) > snd_hda_codec_generic(E) lpc_ich(E) mfd_core(E) xhci_pci(E) xhci_hcd(E) > serio_raw(E) rfkill(E) drm_kms_helper(E) drm(E) i2c_algo_bit(E) i2c_core(E) > snd_hda_intel(E) snd_hda_controller(E) snd_hda_codec(E) button(E) > snd_hwdep(E) battery(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) video(E) > ac(E) acpi_cpufreq(E) processor(E) fuse(E) parport_pc(E) ppdev(E) lp(E) > parport(E) autofs4(E) ext4(E) crc16(E) jbd2(E) mbcache(E) sd_mod(E) > ata_generic(E) > [ 29.295080] ahci(E) libahci(E) ata_piix(E) libata(E) scsi_mod(E) b44(E) > firewire_ohci(E) sdhci_pci(E) sdhci(E) firewire_core(E) crc_itu_t(E) mii(E) > ssb(E) mmc_core(E) libphy(E) uhci_hcd(E) ehci_pci(E) ehci_hcd(E) thermal(E) > thermal_sys(E) usbcore(E) usb_common(E) > [ 29.296301] CPU: 0 PID: 53 Comm: kworker/0:3 Tainted: G W E > 3.19.0-rc6-next-20150202-150201- #4 > [ 29.296303] Hardware name: Dell Inc. Vostro 1500 > /0NX907, BIOS A06 04/21/2008 > [ 29.296314] Workqueue: events output_poll_execute [drm_kms_helper] > [ 29.296316] 0000000000000000 0000000000000009 ffffffff813e790a > 0000000000000000 > [ 29.296319] ffffffff8104178e ffff880197a38e40 ffffffffa04eb56d > 0000000000000000 > [ 29.296323] ffff880195844d80 0000000000000500 0000000000000400 > 0000000000000000 > [ 29.296326] Call Trace: > [ 29.296332] [<ffffffff813e790a>] ? dump_stack+0x4a/0x74 > [ 29.296337] [<ffffffff8104178e>] ? warn_slowpath_common+0x9d/0xb5 > [ 29.296354] [<ffffffffa04eb56d>] ? drm_framebuffer_reference+0x5b/0x64 > [drm] > [ 29.296368] [<ffffffffa04eb56d>] ? drm_framebuffer_reference+0x5b/0x64 > [drm] > [ 29.296408] [<ffffffffa07e01fc>] ? intel_plane_duplicate_state+0x4d/0x69 > [i915] > [ 29.296415] [<ffffffffa054cb22>] ? drm_plane_helper_update+0x61/0xff > [drm_kms_helper] > [ 29.296439] [<ffffffffa07caf84>] ? __intel_set_mode+0x796/0x89a [i915] > [ 29.296464] [<ffffffffa07cfc43>] ? intel_set_mode+0x6e/0x8f [i915] > [ 29.296489] [<ffffffffa07d00b7>] ? intel_get_load_detect_pipe+0x382/0x420 > [i915] > [ 29.296517] [<ffffffffa07faa8c>] ? intel_tv_detect+0x116/0x43d [i915] > [ 29.296522] [<ffffffff8105f8ed>] ? preempt_count_sub+0xab/0xca > [ 29.296529] [<ffffffffa054bf5b>] ? > drm_helper_probe_single_connector_modes_merge_bits+0xc7/0x392 [drm_kms_helper] > [ 29.296538] [<ffffffffa0552fa2>] ? > drm_fb_helper_probe_connector_modes+0x3d/0x51 [drm_kms_helper] > [ 29.296545] [<ffffffffa0554a25>] ? drm_fb_helper_hotplug_event+0x75/0xac > [drm_kms_helper] > [ 29.296551] [<ffffffffa054bd85>] ? output_poll_execute+0x125/0x154 > [drm_kms_helper] > [ 29.296555] [<ffffffff810543c6>] ? process_one_work+0x171/0x28e > [ 29.296558] [<ffffffff810546b2>] ? worker_thread+0x1a5/0x272 > [ 29.296560] [<ffffffff8105450d>] ? process_scheduled_works+0x2a/0x2a > [ 29.296564] [<ffffffff8105812d>] ? kthread+0x9e/0xa6 > [ 29.296567] [<ffffffff8105808f>] ? __kthread_parkme+0x5c/0x5c > [ 29.296571] [<ffffffff813ec2ac>] ? ret_from_fork+0x7c/0xb0 > [ 29.296574] [<ffffffff8105808f>] ? __kthread_parkme+0x5c/0x5c > [ 29.296576] ---[ end trace 4742dbfffee243fc ]--- Which makes me wonder whether this is not the more significant warning? -Chris -- Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
