This patch sets default initial phase and trip to scale NV12
content. In future, if needed these can be set via properties
or other means depending on incoming stream request. Until then
defaults are fine.
Signed-off-by: Chandra Konduru <chandra.kond...@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 7 +++++++
drivers/gpu/drm/i915/intel_sprite.c | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 6714066..3296d16 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3098,6 +3098,7 @@ static void skylake_update_primary_plane(struct drm_crtc
*crtc,
int scaler_id = -1;
u32 aux_dist = 0, aux_x_offset = 0, aux_y_offset = 0, aux_stride = 0;
u32 tile_row_adjustment = 0;
+ u32 hphase = 0, vphase = 0;
plane_state = to_intel_plane_state(plane->state);
@@ -3181,6 +3182,9 @@ static void skylake_update_primary_plane(struct drm_crtc
*crtc,
/* For tile-Yf, uv-subplane tile width is 2x of
Y-subplane */
aux_stride = fb->modifier[0] ==
I915_FORMAT_MOD_Yf_TILED ?
DIV_ROUND_UP(stride, 2) : stride;
+
+ hphase = 0x00010001; /* use trip for both Y and UV */
+ vphase = 0x00012000; /* use trip for Y and phase 0.5
for UV */
}
}
plane_offset = y_offset << 16 | x_offset;
@@ -3209,6 +3213,9 @@ static void skylake_update_primary_plane(struct drm_crtc
*crtc,
I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
}
+ I915_WRITE(SKL_PS_HPHASE(pipe, scaler_id), hphase);
+ I915_WRITE(SKL_PS_VPHASE(pipe, scaler_id), vphase);
+
I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
POSTING_READ(PLANE_SURF(pipe, 0));
diff --git a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index 347fb1f..5ca62b6 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -190,6 +190,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct
drm_crtc *crtc,
int scaler_id;
u32 aux_dist = 0, aux_x_offset = 0, aux_y_offset = 0, aux_stride = 0;
u32 tile_row_adjustment = 0;
+ u32 hphase = 0, vphase = 0;
plane_ctl = PLANE_CTL_ENABLE |
PLANE_CTL_PIPE_CSC_ENABLE;
@@ -264,6 +265,9 @@ skl_update_plane(struct drm_plane *drm_plane, struct
drm_crtc *crtc,
/* For tile-Yf, uv-subplane tile width is 2x of
Y-subplane */
aux_stride = fb->modifier[0] ==
I915_FORMAT_MOD_Yf_TILED ?
DIV_ROUND_UP(stride, 2) : stride;
+
+ hphase = 0x00010001; /* use trip for both Y and UV */
+ vphase = 0x00012000; /* use trip for Y and phase 0.5
for UV */
}
}
plane_offset = y_offset << 16 | x_offset;
@@ -292,6 +296,9 @@ skl_update_plane(struct drm_plane *drm_plane, struct
drm_crtc *crtc,
I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
}
+ I915_WRITE(SKL_PS_HPHASE(pipe, scaler_id), hphase);
+ I915_WRITE(SKL_PS_VPHASE(pipe, scaler_id), vphase);
+
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
I915_WRITE(PLANE_SURF(pipe, plane), surf_addr);
POSTING_READ(PLANE_SURF(pipe, plane));
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
