On Wed, Sep 16, 2015 at 02:48:41PM +0530, Gaurav K Singh wrote:
> Program the required mmio regs for hactive and vactive display size.
This doesn't program anything, just reads them out.
As for readout, do the pipe registers contain the same values? In that
case we could just do a sanity check to make sure the DSI and pipe
registers match.
>
> Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 37
> ++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index ab9f06a..0285af9 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7653,6 +7653,7 @@ static void intel_get_pipe_timings(struct intel_crtc
> *crtc,
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> + bool is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
> uint32_t tmp;
>
> tmp = I915_READ(HTOTAL(cpu_transcoder));
> @@ -7681,6 +7682,25 @@ static void intel_get_pipe_timings(struct intel_crtc
> *crtc,
> pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
> }
>
> + if (IS_BROXTON(dev) && is_dsi) {
> + struct intel_encoder *encoder;
> +
> + for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> + struct intel_dsi *intel_dsi =
> + enc_to_intel_dsi(&encoder->base);
> + enum port port;
> +
> + for_each_dsi_port(port, intel_dsi->ports) {
> + pipe_config->base.adjusted_mode.crtc_hdisplay =
> +
> I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
> + pipe_config->base.adjusted_mode.crtc_vdisplay =
> +
> I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
> + pipe_config->base.adjusted_mode.crtc_vtotal =
> +
> I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
> + }
> + }
> + }
> +
> tmp = I915_READ(PIPESRC(crtc->pipe));
> pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
> pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
> @@ -10569,6 +10589,7 @@ struct drm_display_mode *intel_crtc_mode_get(struct
> drm_device *dev,
> int vtot = I915_READ(VTOTAL(cpu_transcoder));
> int vsync = I915_READ(VSYNC(cpu_transcoder));
> enum pipe pipe = intel_crtc->pipe;
> + bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
>
> mode = kzalloc(sizeof(*mode), GFP_KERNEL);
> if (!mode)
> @@ -10598,6 +10619,22 @@ struct drm_display_mode *intel_crtc_mode_get(struct
> drm_device *dev,
> mode->vsync_start = (vsync & 0xffff) + 1;
> mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
>
> + if (IS_BROXTON(dev) && is_dsi) {
> + struct intel_encoder *encoder;
> +
> + for_each_encoder_on_crtc(dev, &intel_crtc->base, encoder) {
> + struct intel_dsi *intel_dsi =
> +
> enc_to_intel_dsi(&encoder->base);
> + enum port port;
> +
> + for_each_dsi_port(port, intel_dsi->ports) {
> + mode->vtotal =
> I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
> + mode->hdisplay =
> I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
> + mode->vdisplay =
> I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
> + }
> + }
> + }
> +
> drm_mode_set_name(mode);
>
> return mode;
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
