Reviewed-by: Mika Kahola <mika.kah...@intel.com>
On Tue, 2015-09-08 at 13:40 +0300, ville.syrj...@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Replace intel_dvo->panel_fixed_mode with the appropriate intel_panel
> stuff. Now all connectors that have a fixed mode use intel_panel.
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_dvo.c | 49
> ++++++++++++++++++----------------------
> 1 file changed, 22 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dvo.c
> b/drivers/gpu/drm/i915/intel_dvo.c
> index c80fe1f..0bc8aa8 100644
> --- a/drivers/gpu/drm/i915/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/intel_dvo.c
> @@ -97,7 +97,8 @@ struct intel_dvo {
>
> struct intel_dvo_device dev;
>
> - struct drm_display_mode *panel_fixed_mode;
> + struct intel_connector *attached_connector;
> +
> bool panel_wants_dither;
> };
>
> @@ -201,6 +202,8 @@ intel_dvo_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
> + const struct drm_display_mode *fixed_mode =
> + to_intel_connector(connector)->panel.fixed_mode;
> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> int target_clock = mode->clock;
>
> @@ -209,13 +212,13 @@ intel_dvo_mode_valid(struct drm_connector *connector,
>
> /* XXX: Validate clock range */
>
> - if (intel_dvo->panel_fixed_mode) {
> - if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
> + if (fixed_mode) {
> + if (mode->hdisplay > fixed_mode->hdisplay)
> return MODE_PANEL;
> - if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
> + if (mode->vdisplay > fixed_mode->vdisplay)
> return MODE_PANEL;
>
> - target_clock = intel_dvo->panel_fixed_mode->clock;
> + target_clock = fixed_mode->clock;
> }
>
> if (target_clock > max_dotclk)
> @@ -228,6 +231,8 @@ static bool intel_dvo_compute_config(struct intel_encoder
> *encoder,
> struct intel_crtc_state *pipe_config)
> {
> struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
> + const struct drm_display_mode *fixed_mode =
> + intel_dvo->attached_connector->panel.fixed_mode;
> struct drm_display_mode *adjusted_mode =
> &pipe_config->base.adjusted_mode;
>
> /* If we have timings from the BIOS for the panel, put them in
> @@ -235,21 +240,8 @@ static bool intel_dvo_compute_config(struct
> intel_encoder *encoder,
> * with the panel scaling set up to source from the H/VDisplay
> * of the original mode.
> */
> - if (intel_dvo->panel_fixed_mode != NULL) {
> -#define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
> - C(hdisplay);
> - C(hsync_start);
> - C(hsync_end);
> - C(htotal);
> - C(vdisplay);
> - C(vsync_start);
> - C(vsync_end);
> - C(vtotal);
> - C(clock);
> -#undef C
> -
> - drm_mode_set_crtcinfo(adjusted_mode, 0);
> - }
> + if (fixed_mode)
> + intel_fixed_panel_mode(fixed_mode, adjusted_mode);
>
> return true;
> }
> @@ -318,8 +310,9 @@ intel_dvo_detect(struct drm_connector *connector, bool
> force)
>
> static int intel_dvo_get_modes(struct drm_connector *connector)
> {
> - struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
> struct drm_i915_private *dev_priv = connector->dev->dev_private;
> + const struct drm_display_mode *fixed_mode =
> + to_intel_connector(connector)->panel.fixed_mode;
>
> /* We should probably have an i2c driver get_modes function for those
> * devices which will have a fixed set of modes determined by the chip
> @@ -331,9 +324,9 @@ static int intel_dvo_get_modes(struct drm_connector
> *connector)
> if (!list_empty(&connector->probed_modes))
> return 1;
>
> - if (intel_dvo->panel_fixed_mode != NULL) {
> + if (fixed_mode) {
> struct drm_display_mode *mode;
> - mode = drm_mode_duplicate(connector->dev,
> intel_dvo->panel_fixed_mode);
> + mode = drm_mode_duplicate(connector->dev, fixed_mode);
> if (mode) {
> drm_mode_probed_add(connector, mode);
> return 1;
> @@ -346,6 +339,7 @@ static int intel_dvo_get_modes(struct drm_connector
> *connector)
> static void intel_dvo_destroy(struct drm_connector *connector)
> {
> drm_connector_cleanup(connector);
> + intel_panel_fini(&to_intel_connector(connector)->panel);
> kfree(connector);
> }
>
> @@ -372,8 +366,6 @@ static void intel_dvo_enc_destroy(struct drm_encoder
> *encoder)
> if (intel_dvo->dev.dev_ops->destroy)
> intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
>
> - kfree(intel_dvo->panel_fixed_mode);
> -
> intel_encoder_destroy(encoder);
> }
>
> @@ -438,6 +430,8 @@ void intel_dvo_init(struct drm_device *dev)
> return;
> }
>
> + intel_dvo->attached_connector = intel_connector;
> +
> intel_encoder = &intel_dvo->base;
> drm_encoder_init(dev, &intel_encoder->base,
> &intel_dvo_enc_funcs, encoder_type);
> @@ -542,8 +536,9 @@ void intel_dvo_init(struct drm_device *dev)
> * headers, likely), so for now, just get the current
> * mode being output through DVO.
> */
> - intel_dvo->panel_fixed_mode =
> - intel_dvo_get_current_mode(connector);
> + intel_panel_init(&intel_connector->panel,
> + intel_dvo_get_current_mode(connector),
> + NULL);
> intel_dvo->panel_wants_dither = true;
> }
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
