There is no dedicated aux channel for port E on SKL. Instead the VBT
describes which of the other aux channels to use. When grabbing an aux
power domain for port E we need to take this into account.
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: Patrik Jakobsson <patrik.jakobs...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 19 +++++++++++++++----
drivers/gpu/drm/i915/intel_dp.c | 2 +-
drivers/gpu/drm/i915/intel_drv.h | 1 +
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 0743337..86c89d4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5212,8 +5212,11 @@ static enum intel_display_power_domain
port_to_power_domain(enum port port)
}
}
-static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
+static enum intel_display_power_domain port_to_aux_power_domain(
+ struct drm_i915_private *dev_priv, enum port port)
{
+ enum port alternate_port;
+
switch (port) {
case PORT_A:
return POWER_DOMAIN_AUX_A;
@@ -5224,7 +5227,14 @@ static enum intel_display_power_domain
port_to_aux_power_domain(enum port port)
case PORT_D:
return POWER_DOMAIN_AUX_D;
case PORT_E:
- /* FIXME: Check VBT for actual wiring of PORT E */
+ if (IS_SKYLAKE(dev_priv)) {
+ alternate_port = skl_porte_aux_port(dev_priv);
+ if (alternate_port != PORT_E)
+ return port_to_aux_power_domain(dev_priv,
+ alternate_port);
+ WARN_ON_ONCE(alternate_port == PORT_E);
+ }
+
return POWER_DOMAIN_AUX_D;
default:
MISSING_CASE(port);
@@ -5263,6 +5273,7 @@ enum intel_display_power_domain
intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
{
struct drm_device *dev = intel_encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
switch (intel_encoder->type) {
@@ -5279,10 +5290,10 @@ intel_display_port_aux_power_domain(struct
intel_encoder *intel_encoder)
case INTEL_OUTPUT_DISPLAYPORT:
case INTEL_OUTPUT_EDP:
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
- return port_to_aux_power_domain(intel_dig_port->port);
+ return port_to_aux_power_domain(dev_priv, intel_dig_port->port);
case INTEL_OUTPUT_DP_MST:
intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
- return port_to_aux_power_domain(intel_dig_port->port);
+ return port_to_aux_power_domain(dev_priv, intel_dig_port->port);
default:
MISSING_CASE(intel_encoder->type);
return POWER_DOMAIN_AUX_A;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f2bfca0..81eb558 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1070,7 +1070,7 @@ static i915_reg_t ilk_aux_data_reg(struct
drm_i915_private *dev_priv,
* On SKL we don't have Aux for port E so we rely
* on VBT to set a proper alternate aux channel.
*/
-static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
+enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
{
const struct ddi_vbt_port_info *info =
&dev_priv->vbt.ddi_port_info[PORT_E];
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8fae824..1ef2c0e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1248,6 +1248,7 @@ void intel_dp_hot_plug(struct intel_encoder
*intel_encoder);
void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv);
uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes);
void intel_plane_destroy(struct drm_plane *plane);
+enum port skl_porte_aux_port(struct drm_i915_private *dev_priv);
void intel_edp_drrs_enable(struct intel_dp *intel_dp);
void intel_edp_drrs_disable(struct intel_dp *intel_dp);
void intel_edp_drrs_invalidate(struct drm_device *dev,
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
