On Tue, Dec 08, 2015 at 07:59:44PM +0200, ville.syrj...@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> 
> Move the ddi buffer translation programming to occur from the encoder
> .pre_enable() hook, for just the ddi port we are enabling. Previously
> we used to reprogram the translations for all ddi ports during
> init and during power well enabling.
> 
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.c         |  1 -
>  drivers/gpu/drm/i915/intel_ddi.c        | 99 
> ++++++++++-----------------------
>  drivers/gpu/drm/i915/intel_display.c    |  3 -
>  drivers/gpu/drm/i915/intel_dp_mst.c     |  2 +
>  drivers/gpu/drm/i915/intel_drv.h        |  2 +-
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 12 ----
>  6 files changed, 31 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index e6935f1cb689..4d8feff411bb 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1062,7 +1062,6 @@ static int bxt_resume_prepare(struct drm_i915_private 
> *dev_priv)
>        */
>       broxton_init_cdclk(dev);
>       broxton_ddi_phy_init(dev);
> -     intel_prepare_ddi(dev);
>  
>       return 0;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c 
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 152c813cc43e..074121efb265 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -342,12 +342,6 @@ enum port intel_ddi_get_encoder_port(struct 
> intel_encoder *intel_encoder)
>       return port;
>  }
>  
> -static bool
> -intel_dig_port_supports_hdmi(const struct intel_digital_port *intel_dig_port)
> -{
> -     return i915_mmio_reg_valid(intel_dig_port->hdmi.hdmi_reg);
> -}
> -
>  static const struct ddi_buf_trans *
>  skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
>  {
> @@ -409,28 +403,34 @@ skl_get_buf_trans_hdmi(struct drm_i915_private 
> *dev_priv, int *n_entries)
>   * in either FDI or DP modes only, as HDMI connections will work with both
>   * of those
>   */
> -static void intel_prepare_ddi_buffers(struct drm_i915_private *dev_priv,
> -                                   enum port port, bool supports_hdmi)
> +void intel_prepare_ddi_buffers(struct intel_encoder *encoder)

s/buffers/buffer/ since it's not just for one encoder? Or do we have a
pile of buffers per encoder? Seems a bit confusing to me, but really just
a bikeshed and was there before.

>  {
> +     struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>       u32 iboost_bit = 0;
>       int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry,
>           size;
> -     int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> +     int hdmi_level;
> +     enum port port;
>       const struct ddi_buf_trans *ddi_translations_fdi;
>       const struct ddi_buf_trans *ddi_translations_dp;
>       const struct ddi_buf_trans *ddi_translations_edp;
>       const struct ddi_buf_trans *ddi_translations_hdmi;
>       const struct ddi_buf_trans *ddi_translations;
>  
> +     port = intel_ddi_get_encoder_port(encoder);
> +     hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> +
>       if (IS_BROXTON(dev_priv)) {
> -             if (!supports_hdmi)
> +             if (encoder->type != INTEL_OUTPUT_HDMI)
>                       return;
>  
>               /* Vswing programming for HDMI */
>               bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
>                                       INTEL_OUTPUT_HDMI);
>               return;
> -     } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> +     }
> +
> +     if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
>               ddi_translations_fdi = NULL;
>               ddi_translations_dp =
>                               skl_get_buf_trans_dp(dev_priv, &n_dp_entries);
> @@ -483,30 +483,18 @@ static void intel_prepare_ddi_buffers(struct 
> drm_i915_private *dev_priv,
>               hdmi_default_entry = 7;
>       }
>  
> -     switch (port) {
> -     case PORT_A:
> +     switch (encoder->type) {
> +     case INTEL_OUTPUT_EDP:
>               ddi_translations = ddi_translations_edp;
>               size = n_edp_entries;
>               break;
> -     case PORT_B:
> -     case PORT_C:
> +     case INTEL_OUTPUT_DISPLAYPORT:
> +     case INTEL_OUTPUT_HDMI:
>               ddi_translations = ddi_translations_dp;
>               size = n_dp_entries;
>               break;
> -     case PORT_D:
> -             if (intel_dp_is_edp(dev_priv->dev, PORT_D)) {
> -                     ddi_translations = ddi_translations_edp;
> -                     size = n_edp_entries;
> -             } else {
> -                     ddi_translations = ddi_translations_dp;
> -                     size = n_dp_entries;
> -             }
> -             break;
> -     case PORT_E:
> -             if (ddi_translations_fdi)
> -                     ddi_translations = ddi_translations_fdi;
> -             else
> -                     ddi_translations = ddi_translations_dp;
> +     case INTEL_OUTPUT_ANALOG:
> +             ddi_translations = ddi_translations_fdi;
>               size = n_dp_entries;
>               break;
>       default:
> @@ -520,7 +508,7 @@ static void intel_prepare_ddi_buffers(struct 
> drm_i915_private *dev_priv,
>                          ddi_translations[i].trans2);
>       }
>  
> -     if (!supports_hdmi)
> +     if (encoder->type != INTEL_OUTPUT_HDMI)
>               return;
>  
>       /* Choose a good default if VBT is badly populated */
> @@ -535,37 +523,6 @@ static void intel_prepare_ddi_buffers(struct 
> drm_i915_private *dev_priv,
>                  ddi_translations_hdmi[hdmi_level].trans2);
>  }
>  
> -/* Program DDI buffers translations for DP. By default, program ports A-D in 
> DP
> - * mode and port E for FDI.
> - */
> -void intel_prepare_ddi(struct drm_device *dev)
> -{
> -     struct intel_encoder *intel_encoder;
> -     bool visited[I915_MAX_PORTS] = { 0, };
> -
> -     if (!HAS_DDI(dev))
> -             return;
> -
> -     for_each_intel_encoder(dev, intel_encoder) {
> -             struct intel_digital_port *intel_dig_port;
> -             enum port port;
> -             bool supports_hdmi;
> -
> -             if (intel_encoder->type == INTEL_OUTPUT_DSI)
> -                     continue;
> -
> -             ddi_get_encoder_port(intel_encoder, &intel_dig_port, &port);
> -             if (visited[port])
> -                     continue;
> -
> -             supports_hdmi = intel_dig_port &&
> -                             intel_dig_port_supports_hdmi(intel_dig_port);
> -
> -             intel_prepare_ddi_buffers(to_i915(dev), port, supports_hdmi);
> -             visited[port] = true;
> -     }
> -}
> -
>  static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
>                                   enum port port)
>  {
> @@ -594,8 +551,14 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
>       struct drm_device *dev = crtc->dev;
>       struct drm_i915_private *dev_priv = dev->dev_private;
>       struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +     struct intel_encoder *encoder;
>       u32 temp, i, rx_ctl_val;
>  
> +     for_each_encoder_on_crtc(dev, crtc, encoder) {
> +             WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
> +             intel_prepare_ddi_buffers(encoder);
> +     }

I still maintain that on hsw the entire fdi stuff really should all be
part of the encoder, since it's all behind the pipe/port crossbar. Would
avoid this little annoyance here.

> +
>       /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
>        * mode set "sequence for CRT port" document:
>        * - TP1 to TP2 time with the default value
> @@ -2321,12 +2284,12 @@ void intel_ddi_clk_select(struct intel_encoder 
> *encoder,
>  static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
>  {
>       struct drm_encoder *encoder = &intel_encoder->base;
> -     struct drm_device *dev = encoder->dev;
> -     struct drm_i915_private *dev_priv = dev->dev_private;
> +     struct drm_i915_private *dev_priv = to_i915(encoder->dev);
>       struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
>       enum port port = intel_ddi_get_encoder_port(intel_encoder);
>       int type = intel_encoder->type;
> -     int hdmi_level;
> +
> +     intel_prepare_ddi_buffers(intel_encoder);
>  
>       if (type == INTEL_OUTPUT_EDP) {
>               struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> @@ -2344,17 +2307,11 @@ static void intel_ddi_pre_enable(struct intel_encoder 
> *intel_encoder)
>  
>               intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
>               intel_dp_start_link_train(intel_dp);
> -             if (port != PORT_A || INTEL_INFO(dev)->gen >= 9)
> +             if (port != PORT_A || INTEL_INFO(dev_priv)->gen >= 9)
>                       intel_dp_stop_link_train(intel_dp);
>       } else if (type == INTEL_OUTPUT_HDMI) {
>               struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
>  
> -             if (IS_BROXTON(dev)) {
> -                     hdmi_level = dev_priv->vbt.
> -                             ddi_port_info[port].hdmi_level_shift;
> -                     bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
> -                                             INTEL_OUTPUT_HDMI);
> -             }
>               intel_hdmi->set_infoframes(encoder,
>                                          crtc->config->has_hdmi_sink,
>                                          &crtc->config->base.adjusted_mode);
> diff --git a/drivers/gpu/drm/i915/intel_display.c 
> b/drivers/gpu/drm/i915/intel_display.c
> index f1a5404728df..bc7aaa3c431e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9649,8 +9649,6 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv)
>               val |= PCH_LP_PARTITION_LEVEL_DISABLE;
>               I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
>       }
> -
> -     intel_prepare_ddi(dev);
>  }
>  
>  static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
> @@ -15172,7 +15170,6 @@ static void i915_disable_vga(struct drm_device *dev)
>  void intel_modeset_init_hw(struct drm_device *dev)
>  {
>       intel_update_cdclk(dev);
> -     intel_prepare_ddi(dev);

This patch is worth it just for this hunk here and the one below in the
skl dmc code.

Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>

>       intel_init_clock_gating(dev);
>       intel_enable_gt_powersave(dev);
>  }
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c 
> b/drivers/gpu/drm/i915/intel_dp_mst.c
> index abfc171888b8..73ac68e21b7e 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -173,6 +173,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder 
> *encoder)
>       intel_mst->port = found->port;
>  
>       if (intel_dp->active_mst_links == 0) {
> +             intel_prepare_ddi_buffers(&intel_dig_port->base);
> +
>               intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
>  
>               intel_dp_set_link_params(intel_dp, intel_crtc->config);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h 
> b/drivers/gpu/drm/i915/intel_drv.h
> index 43d451c7c366..a8a84b8c2bac 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -996,7 +996,7 @@ void intel_crt_init(struct drm_device *dev);
>  /* intel_ddi.c */
>  void intel_ddi_clk_select(struct intel_encoder *encoder,
>                         const struct intel_crtc_state *pipe_config);
> -void intel_prepare_ddi(struct drm_device *dev);
> +void intel_prepare_ddi_buffers(struct intel_encoder *encoder);
>  void hsw_fdi_link_train(struct drm_crtc *crtc);
>  void intel_ddi_init(struct drm_device *dev, enum port port);
>  enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c 
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 2c2151f1c47e..60a592d20402 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -625,7 +625,6 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
>  static void skl_set_power_well(struct drm_i915_private *dev_priv,
>                       struct i915_power_well *power_well, bool enable)
>  {
> -     struct drm_device *dev = dev_priv->dev;
>       uint32_t tmp, fuse_status;
>       uint32_t req_mask, state_mask;
>       bool is_enabled, enable_requested, check_fuse_status = false;
> @@ -669,17 +668,6 @@ static void skl_set_power_well(struct drm_i915_private 
> *dev_priv,
>                               !I915_READ(HSW_PWR_WELL_BIOS),
>                               "Invalid for power well status to be enabled, 
> unless done by the BIOS, \
>                               when request is to disable!\n");
> -                     if (power_well->data == SKL_DISP_PW_2) {
> -                             /*
> -                              * DDI buffer programming unnecessary during
> -                              * driver-load/resume as it's already done
> -                              * during modeset initialization then. It's
> -                              * also invalid here as encoder list is still
> -                              * uninitialized.
> -                              */
> -                             if (!dev_priv->power_domains.initializing)
> -                                     intel_prepare_ddi(dev);
> -                     }
>                       I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
>               }
>  
> -- 
> 2.4.10
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to