On Thu, Dec 10, 2015 at 02:52:29PM +0100, Daniel Vetter wrote:
> On Tue, Dec 08, 2015 at 07:59:47PM +0200, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > DDI buffer prorgramming works quite differently depending on
> > the mode of the DDI port (DP/eDP/FDI vs. HDMI/DVI). Let's split
> > the function that does the programming into two matching variants
> > as well.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_ddi.c | 94
> > ++++++++++++++++++++++---------------
> > drivers/gpu/drm/i915/intel_dp_mst.c | 4 +-
> > drivers/gpu/drm/i915/intel_drv.h | 2 +-
> > 3 files changed, 60 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > b/drivers/gpu/drm/i915/intel_ddi.c
> > index f812607045d6..c47f45c0f4a2 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -397,37 +397,22 @@ skl_get_buf_trans_hdmi(struct drm_i915_private
> > *dev_priv, int *n_entries)
> >
> > /*
> > * Starting with Haswell, DDI port buffers must be programmed with correct
> > - * values in advance. The buffer values are different for FDI and DP modes,
> > - * but the HDMI/DVI fields are shared among those. So we program the DDI
> > - * in either FDI or DP modes only, as HDMI connections will work with both
> > - * of those
> > + * values in advance. This function programs the correct values for
> > + * DP/eDP/FDI use cases.
> > */
> > -void intel_prepare_ddi_buffers(struct intel_encoder *encoder)
> > +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder)
> > {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > u32 iboost_bit = 0;
> > - int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry,
> > - size;
> > - int hdmi_level;
> > - enum port port;
> > + int i, n_dp_entries, n_edp_entries, size;
> > + enum port port = intel_ddi_get_encoder_port(encoder);
> > const struct ddi_buf_trans *ddi_translations_fdi;
> > const struct ddi_buf_trans *ddi_translations_dp;
> > const struct ddi_buf_trans *ddi_translations_edp;
> > - const struct ddi_buf_trans *ddi_translations_hdmi;
> > const struct ddi_buf_trans *ddi_translations;
> >
> > - port = intel_ddi_get_encoder_port(encoder);
> > - hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> > -
> > - if (IS_BROXTON(dev_priv)) {
> > - if (encoder->type != INTEL_OUTPUT_HDMI)
> > - return;
> > -
> > - /* Vswing programming for HDMI */
> > - bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
> > - INTEL_OUTPUT_HDMI);
> > + if (IS_BROXTON(dev_priv))
> > return;
> > - }
> >
> > if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> > ddi_translations_fdi = NULL;
> > @@ -435,9 +420,6 @@ void intel_prepare_ddi_buffers(struct intel_encoder
> > *encoder)
> > skl_get_buf_trans_dp(dev_priv, &n_dp_entries);
> > ddi_translations_edp =
> > skl_get_buf_trans_edp(dev_priv, &n_edp_entries);
> > - ddi_translations_hdmi =
> > - skl_get_buf_trans_hdmi(dev_priv,
> > &n_hdmi_entries);
> > - hdmi_default_entry = 8;
> > /* If we're boosting the current, set bit 31 of trans1 */
> > if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level ||
> > dev_priv->vbt.ddi_port_info[port].dp_boost_level)
> > @@ -454,11 +436,8 @@ void intel_prepare_ddi_buffers(struct intel_encoder
> > *encoder)
> > ddi_translations_fdi = bdw_ddi_translations_fdi;
> > ddi_translations_dp = bdw_ddi_translations_dp;
> > ddi_translations_edp = bdw_ddi_translations_edp;
> > - ddi_translations_hdmi = bdw_ddi_translations_hdmi;
> > n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
> > n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
> > - n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
> > - hdmi_default_entry = 7;
> > } else if (IS_HASWELL(dev_priv)) {
> > BUILD_BUG_ON(ARRAY_SIZE(hsw_ddi_translations_fdi) != 9);
> > BUILD_BUG_ON(ARRAY_SIZE(hsw_ddi_translations_dp) != 9);
> > @@ -466,20 +445,14 @@ void intel_prepare_ddi_buffers(struct intel_encoder
> > *encoder)
> > ddi_translations_fdi = hsw_ddi_translations_fdi;
> > ddi_translations_dp = hsw_ddi_translations_dp;
> > ddi_translations_edp = hsw_ddi_translations_dp;
> > - ddi_translations_hdmi = hsw_ddi_translations_hdmi;
> > n_dp_entries = n_edp_entries =
> > ARRAY_SIZE(hsw_ddi_translations_dp);
> > - n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
> > - hdmi_default_entry = 6;
> > } else {
> > WARN(1, "ddi translation table missing\n");
> > ddi_translations_edp = bdw_ddi_translations_dp;
> > ddi_translations_fdi = bdw_ddi_translations_fdi;
> > ddi_translations_dp = bdw_ddi_translations_dp;
> > - ddi_translations_hdmi = bdw_ddi_translations_hdmi;
> > n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
> > n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
> > - n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
> > - hdmi_default_entry = 7;
> > }
> >
> > switch (encoder->type) {
> > @@ -488,7 +461,6 @@ void intel_prepare_ddi_buffers(struct intel_encoder
> > *encoder)
> > size = n_edp_entries;
> > break;
> > case INTEL_OUTPUT_DISPLAYPORT:
> > - case INTEL_OUTPUT_HDMI:
> > ddi_translations = ddi_translations_dp;
> > size = n_dp_entries;
> > break;
> > @@ -506,10 +478,54 @@ void intel_prepare_ddi_buffers(struct intel_encoder
> > *encoder)
> > I915_WRITE(DDI_BUF_TRANS_HI(port, i),
> > ddi_translations[i].trans2);
> > }
> > +}
> > +
> > +/*
> > + * Starting with Haswell, DDI port buffers must be programmed with correct
> > + * values in advance. This function programs the correct values for
> > + * HDMI/DVI use cases.
> > + */
> > +static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > + u32 iboost_bit = 0;
> > + int n_hdmi_entries, hdmi_default_entry, hdmi_level;
> > + enum port port = intel_ddi_get_encoder_port(encoder);
> > + const struct ddi_buf_trans *ddi_translations_hdmi;
> >
> > if (encoder->type != INTEL_OUTPUT_HDMI)
>
> WARN_ON?
Yeah, or just drop it entirely. Doesn't seem very likely that anyone
would mess this up since it's called from one place only.
>
> > return;
> >
> > + hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
> > +
> > + if (IS_BROXTON(dev_priv)) {
> > + bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port,
> > + INTEL_OUTPUT_HDMI);
> > + return;
> > + }
> > +
> > + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> > + ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv,
> > &n_hdmi_entries);
> > + hdmi_default_entry = 8;
> > + /* If we're boosting the current, set bit 31 of trans1 */
> > + if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level ||
> > + dev_priv->vbt.ddi_port_info[port].dp_boost_level)
> > + iboost_bit = 1<<31;
> > + } else if (IS_BROADWELL(dev_priv)) {
> > + ddi_translations_hdmi = bdw_ddi_translations_hdmi;
> > + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
> > + hdmi_default_entry = 7;
> > + } else if (IS_HASWELL(dev_priv)) {
> > + ddi_translations_hdmi = hsw_ddi_translations_hdmi;
> > + n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
> > + hdmi_default_entry = 6;
> > + } else {
> > + WARN(1, "ddi translation table missing\n");
> > + ddi_translations_hdmi = bdw_ddi_translations_hdmi;
> > + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
> > + hdmi_default_entry = 7;
> > + }
> > +
> > /* Choose a good default if VBT is badly populated */
> > if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN ||
> > hdmi_level >= n_hdmi_entries)
> > @@ -555,7 +571,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
> >
> > for_each_encoder_on_crtc(dev, crtc, encoder) {
> > WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
> > - intel_prepare_ddi_buffers(encoder);
> > + intel_prepare_dp_ddi_buffers(encoder);
> > }
> >
> > /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
> > @@ -2376,8 +2392,6 @@ static void intel_ddi_pre_enable(struct intel_encoder
> > *intel_encoder)
> > enum port port = intel_ddi_get_encoder_port(intel_encoder);
> > int type = intel_encoder->type;
> >
> > - intel_prepare_ddi_buffers(intel_encoder);
> > -
> > if (type == INTEL_OUTPUT_EDP) {
> > struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > intel_edp_panel_on(intel_dp);
> > @@ -2388,6 +2402,8 @@ static void intel_ddi_pre_enable(struct intel_encoder
> > *intel_encoder)
> > if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
> > struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> >
> > + intel_prepare_dp_ddi_buffers(intel_encoder);
> > +
> > intel_dp_set_link_params(intel_dp, crtc->config);
> >
> > intel_ddi_init_dp_buf_reg(intel_encoder);
> > @@ -2399,9 +2415,13 @@ static void intel_ddi_pre_enable(struct
> > intel_encoder *intel_encoder)
> > } else if (type == INTEL_OUTPUT_HDMI) {
> > struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> >
> > + intel_prepare_hdmi_ddi_buffers(intel_encoder);
> > +
> > intel_hdmi->set_infoframes(encoder,
> > crtc->config->has_hdmi_sink,
> > &crtc->config->base.adjusted_mode);
> > + } else if (type == INTEL_OUTPUT_ANALOG) {
> > + intel_prepare_dp_ddi_buffers(intel_encoder);
>
> Hm, I was hoping with an encoder split that we could use the vfunc hooks
> instead of these massive if ladders everywhere ... too much trouble still?
I didn't really think about that TBH. But sounds like a decent idea for
a followup patch.
>
> Anyway, besides the WARN_ON request the patch looks correct, so with that
> addressed Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> > }
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > b/drivers/gpu/drm/i915/intel_dp_mst.c
> > index 73ac68e21b7e..d8e9b28bb2e0 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > @@ -173,10 +173,10 @@ static void intel_mst_pre_enable_dp(struct
> > intel_encoder *encoder)
> > intel_mst->port = found->port;
> >
> > if (intel_dp->active_mst_links == 0) {
> > - intel_prepare_ddi_buffers(&intel_dig_port->base);
> > -
> > intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
> >
> > + intel_prepare_dp_ddi_buffers(&intel_dig_port->base);
> > +
> > intel_dp_set_link_params(intel_dp, intel_crtc->config);
> >
> > intel_ddi_init_dp_buf_reg(&intel_dig_port->base);
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index 9e5db3d71e12..f7ee4bc39b33 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -995,7 +995,7 @@ void intel_crt_init(struct drm_device *dev);
> > /* intel_ddi.c */
> > void intel_ddi_clk_select(struct intel_encoder *encoder,
> > const struct intel_crtc_state *pipe_config);
> > -void intel_prepare_ddi_buffers(struct intel_encoder *encoder);
> > +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder);
> > void hsw_fdi_link_train(struct drm_crtc *crtc);
> > void intel_ddi_init(struct drm_device *dev, enum port port);
> > enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
> > --
> > 2.4.10
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
