Op 02-02-16 om 18:32 schreef Ville Syrjälä:
> On Tue, Feb 02, 2016 at 01:48:17PM +0100, Maarten Lankhorst wrote:
>> drm/i915: Use atomic state to obtain load detection crtc, v2.
>>
>> Instead of restoring dpms and a flag for whether a temp fb is allocated
>> duplicate
>> an atomic state before the new state is committed, and commit it the old
>> state
>> in intel_release_load_detect_pipe.
>>
>> Changes since v1:
>> - Use a real atomic state.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
>> ---
>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>> b/drivers/gpu/drm/i915/intel_display.c
>> index 4d8c9f7857db..c7ba8f4a971e 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -10361,6 +10361,7 @@ mode_fits_in_fbdev(struct drm_device *dev,
>> if (obj->base.size < mode->vdisplay * fb->pitches[0])
>> return NULL;
>>
>> + drm_framebuffer_reference(fb);
>> return fb;
>> #else
>> return NULL;
>> @@ -10416,7 +10417,7 @@ bool intel_get_load_detect_pipe(struct drm_connector
>> *connector,
>> struct drm_device *dev = encoder->dev;
>> struct drm_framebuffer *fb;
>> struct drm_mode_config *config = &dev->mode_config;
>> - struct drm_atomic_state *state = NULL;
>> + struct drm_atomic_state *state = NULL, *restore_state = NULL;
>> struct drm_connector_state *connector_state;
>> struct intel_crtc_state *crtc_state;
>> int ret, i = -1;
>> @@ -10425,6 +10426,8 @@ bool intel_get_load_detect_pipe(struct drm_connector
>> *connector,
>> connector->base.id, connector->name,
>> encoder->base.id, encoder->name);
>>
>> + old->restore_state = NULL;
>> +
>> retry:
>> ret = drm_modeset_lock(&config->connection_mutex, ctx);
>> if (ret)
>> @@ -10441,24 +10444,15 @@ retry:
>> */
>>
>> /* See if we already have a CRTC for this connector */
>> - if (encoder->crtc) {
>> - crtc = encoder->crtc;
>> + if (connector->state->crtc) {
>> + crtc = connector->state->crtc;
>>
>> ret = drm_modeset_lock(&crtc->mutex, ctx);
>> if (ret)
>> goto fail;
>> - ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
>> - if (ret)
>> - goto fail;
>> -
>> - old->dpms_mode = connector->dpms;
>> - old->load_detect_temp = false;
>>
>> /* Make sure the crtc and connector are running */
>> - if (connector->dpms != DRM_MODE_DPMS_ON)
>> - connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
>> -
>> - return true;
>> + goto found;
>> }
>>
>> /* Find an unused one (if possible) */
>> @@ -10466,8 +10460,15 @@ retry:
>> i++;
>> if (!(encoder->possible_crtcs & (1 << i)))
>> continue;
>> - if (possible_crtc->state->enable)
>> +
>> + ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
>> + if (ret)
>> + goto fail;
>> +
>> + if (possible_crtc->state->enable) {
>> + drm_modeset_unlock(&possible_crtc->mutex);
>> continue;
>> + }
>>
>> crtc = possible_crtc;
>> break;
>> @@ -10481,23 +10482,22 @@ retry:
>> goto fail;
>> }
>>
>> - ret = drm_modeset_lock(&crtc->mutex, ctx);
>> - if (ret)
>> - goto fail;
>> +found:
>> + intel_crtc = to_intel_crtc(crtc);
>> +
>> ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
>> if (ret)
>> goto fail;
>>
>> - intel_crtc = to_intel_crtc(crtc);
>> - old->dpms_mode = connector->dpms;
>> - old->load_detect_temp = true;
>> - old->release_fb = NULL;
>> -
>> state = drm_atomic_state_alloc(dev);
>> - if (!state)
>> - return false;
>> + restore_state = drm_atomic_state_alloc(dev);
>> + if (!state || !restore_state) {
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>>
>> state->acquire_ctx = ctx;
>> + restore_state->acquire_ctx = ctx;
>>
>> connector_state = drm_atomic_get_connector_state(state, connector);
>> if (IS_ERR(connector_state)) {
>> @@ -10505,7 +10505,9 @@ retry:
>> goto fail;
>> }
>>
>> - connector_state->crtc = crtc;
>> + ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
>> + if (ret)
>> + goto fail;
>>
>> crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> if (IS_ERR(crtc_state)) {
>> @@ -10529,7 +10531,6 @@ retry:
>> if (fb == NULL) {
>> DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
>> fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
>> - old->release_fb = fb;
>> } else
>> DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
>> if (IS_ERR(fb)) {
>> @@ -10541,15 +10542,28 @@ retry:
>> if (ret)
>> goto fail;
>>
>> - drm_mode_copy(&crtc_state->base.mode, mode);
>> + drm_framebuffer_unreference(fb);
>> +
>> + ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
>> + if (ret)
>> + goto fail;
>> +
>> + ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state,
>> connector));
>> + if (!ret)
>> + ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state,
>> crtc));
>> + if (!ret)
>> + ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state,
>> crtc->primary));
>> + if (ret) {
>> + DRM_DEBUG_KMS("Failed to create a copy of old state to restore:
>> %i\n", ret);
>> + goto fail;
>> + }
>>
>> if (drm_atomic_commit(state)) {
>> DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
>> - if (old->release_fb)
>> - old->release_fb->funcs->destroy(old->release_fb);
>> goto fail;
>> }
>> - crtc->primary->crtc = crtc;
>> +
>> + old->restore_state = restore_state;
>>
>> /* let the connector get through one full cycle before testing */
>> intel_wait_for_vblank(dev, intel_crtc->pipe);
>> @@ -10557,7 +10571,8 @@ retry:
>>
>> fail:
>> drm_atomic_state_free(state);
>> - state = NULL;
>> + drm_atomic_state_free(restore_state);
>> + restore_state = state = NULL;
>>
>> if (ret == -EDEADLK) {
>> drm_modeset_backoff(ctx);
>> @@ -10571,14 +10586,12 @@ void intel_release_load_detect_pipe(struct
>> drm_connector *connector,
>> struct intel_load_detect_pipe *old,
>> struct drm_modeset_acquire_ctx *ctx)
>> {
>> - struct drm_device *dev = connector->dev;
>> struct intel_encoder *intel_encoder =
>> intel_attached_encoder(connector);
>> struct drm_encoder *encoder = &intel_encoder->base;
>> - struct drm_crtc *crtc = encoder->crtc;
>> + struct drm_crtc *crtc = connector->state->crtc;
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> - struct drm_atomic_state *state;
>> - struct drm_connector_state *connector_state;
>> + struct drm_atomic_state *state = old->restore_state;
>> struct intel_crtc_state *crtc_state;
>> int ret;
>>
>> @@ -10586,50 +10599,17 @@ void intel_release_load_detect_pipe(struct
>> drm_connector *connector,
>> connector->base.id, connector->name,
>> encoder->base.id, encoder->name);
>>
>> - if (old->load_detect_temp) {
>> - state = drm_atomic_state_alloc(dev);
>> - if (!state)
>> - goto fail;
>> -
>> - state->acquire_ctx = ctx;
>> -
>> - connector_state = drm_atomic_get_connector_state(state,
>> connector);
>> - if (IS_ERR(connector_state))
>> - goto fail;
>> -
>> - crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> - if (IS_ERR(crtc_state))
>> - goto fail;
>> -
>> - connector_state->crtc = NULL;
>> -
>> - crtc_state->base.enable = crtc_state->base.active = false;
>> -
>> - ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
>> - 0, 0);
>> - if (ret)
>> - goto fail;
>> -
>> - ret = drm_atomic_commit(state);
>> - if (ret)
>> - goto fail;
>> -
>> - if (old->release_fb) {
>> - drm_framebuffer_unregister_private(old->release_fb);
>> - drm_framebuffer_unreference(old->release_fb);
>> - }
>> -
>> + if (!state)
>> return;
>> - }
>>
>> - /* Switch crtc and encoder back off if necessary */
>> - if (old->dpms_mode != DRM_MODE_DPMS_ON)
>> - connector->funcs->dpms(connector, old->dpms_mode);
>> + crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> + crtc_state->shared_dpll = to_intel_crtc_state(crtc->state)->shared_dpll;
> Hmm. What's this shared_dpll stuff?
It's for intel_modeset_clear_plls, normally we duplicate the new state and it's
handled correctly,
but when we duplicate the old state the pll may be different and unexpected
behavior could occur
otherwise.
~Maarten
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
