On Thu, 04 Feb 2016, "Deepak, M" <m.dee...@intel.com> wrote: >> -----Original Message----- >> From: Jani Nikula [mailto:jani.nik...@linux.intel.com] >> Sent: Thursday, February 4, 2016 6:29 PM >> To: Deepak, M <m.dee...@intel.com>; intel-gfx@lists.freedesktop.org >> Cc: Deepak, M <m.dee...@intel.com> >> Subject: Re: [Intel-gfx] [PATCH] drm/i915/bxt: Additional MIPI clock divider >> form B0 stepping onwards >> >> On Wed, 03 Feb 2016, Deepak M <m.dee...@intel.com> wrote: >> > The MIPI clock calculations for the addtional clock are revised from >> > B0 stepping onwards, the bit definitions have changed compared to old >> > stepping. >> > >> > v2: Fixing compilation warning. >> >> Why did you move and rename everything when it was not needed? >> >> BR, >> Jani. >> > [Deepak, M] I have deleted the old macro and added the new as per the new > definitions. With the new bit fields nothing was matching as that of the old.
It's not nothing. Plenty of masks and shifts matched, but you had renamed the defines. Besides, please don't move the definitions where they don't belong. We also have the convention of specifying the bits from highest to lowest. >> >> > >> > Signed-off-by: Deepak M <m.dee...@intel.com> >> > --- >> > drivers/gpu/drm/i915/i915_reg.h | 104 +++++++++++++++++------------ >> ------ >> > drivers/gpu/drm/i915/intel_dsi_pll.c | 64 ++++++++++++++------- >> > 2 files changed, 95 insertions(+), 73 deletions(-) >> > >> > diff --git a/drivers/gpu/drm/i915/i915_reg.h >> > b/drivers/gpu/drm/i915/i915_reg.h index c0bd691..2568f35 100644 >> > --- a/drivers/gpu/drm/i915/i915_reg.h >> > +++ b/drivers/gpu/drm/i915/i915_reg.h >> > @@ -7638,6 +7638,57 @@ enum skl_disp_power_wells { >> > >> > /* MIPI DSI registers */ >> > >> > +#define BXT_MIPI1_RX_LOWER_SHIFT 16 >> > +#define BXT_MIPI2_RX_LOWER_SHIFT 0 >> > +#define BXT_MIPI_RX_LOWER_SHIFT(port) \ >> > + _MIPI_PORT(port, BXT_MIPI1_RX_LOWER_SHIFT, \ >> > + BXT_MIPI2_RX_LOWER_SHIFT) >> > +#define BXT_MIPI1_RX_LOWER_DIVIDER_MASK (3 << 16) >> > +#define BXT_MIPI2_RX_LOWER_DIVIDER_MASK (3 << 0) >> > +#define BXT_MIPI_RX_LOWER_DIVIDER_MASK(port) \ >> > + (3 << BXT_MIPI_RX_LOWER_SHIFT(port)) >> > +#define BXT_MIPI_RX_LOWER_DIVIDER(port, val) \ >> > + ((val & 3) << BXT_MIPI_RX_LOWER_SHIFT(port)) >> > + >> > +#define BXT_MIPI1_8X_BY3_SHIFT 19 >> > +#define BXT_MIPI2_8X_BY3_SHIFT 3 >> > +#define BXT_MIPI_8X_BY3_SHIFT(port) \ >> > + _MIPI_PORT(port, BXT_MIPI1_8X_BY3_SHIFT, \ >> > + BXT_MIPI2_8X_BY3_SHIFT) >> > +#define BXT_MIPI1_8X_BY3_DIVIDER_MASK (3 << 19) >> > +#define BXT_MIPI2_8X_BY3_DIVIDER_MASK (3 << 3) >> > +#define BXT_MIPI_8X_BY3_DIVIDER_MASK(port) \ >> > + (3 << BXT_MIPI_8X_BY3_SHIFT(port)) >> > +#define BXT_MIPI_8X_BY3_DIVIDER(port, val) \ >> > + ((val & 3) << BXT_MIPI_8X_BY3_SHIFT(port)) >> > + >> > +#define BXT_MIPI1_RX_UPPER_SHIFT 21 >> > +#define BXT_MIPI2_RX_UPPER_SHIFT 5 >> > +#define BXT_MIPI_RX_UPPER_SHIFT(port) \ >> > + _MIPI_PORT(port, BXT_MIPI1_RX_UPPER_SHIFT, \ >> > + BXT_MIPI2_RX_UPPER_SHIFT) >> > +#define BXT_MIPI1_RX_UPPER_DIVIDER_MASK (3 << 21) >> > +#define BXT_MIPI2_RX_UPPER_DIVIDER_MASK (3 << 5) >> > +#define BXT_MIPI_RX_UPPER_DIVIDER_MASK(port) \ >> > + (3 << BXT_MIPI_RX_UPPER_SHIFT(port)) >> > +#define BXT_MIPI_RX_UPPER_DIVIDER(port, val) \ >> > + ((val & 3) << BXT_MIPI_RX_UPPER_SHIFT(port)) >> > + >> > +#define BXT_MIPI1_TX_SHIFT 26 >> > +#define BXT_MIPI2_TX_SHIFT 10 >> > +#define BXT_MIPI_TX_SHIFT(port) \ >> > + _MIPI_PORT(port, BXT_MIPI1_TX_SHIFT, \ >> > + BXT_MIPI2_TX_SHIFT) >> > +#define BXT_MIPI1_TX_DIVIDER_MASK (0x3F << 26) >> > +#define BXT_MIPI2_TX_DIVIDER_MASK (0x3F << 10) >> > +#define BXT_MIPI_TX_DIVIDER_MASK(port) \ >> > + (0x3F << BXT_MIPI_TX_SHIFT(port)) >> > +#define BXT_MIPI_TX_DIVIDER(port, val) \ >> > + ((val & 0x3F) << BXT_MIPI_TX_SHIFT(port)) >> > + >> > +#define RX_DIVIDER_BIT_1_2 0x3 >> > +#define RX_DIVIDER_BIT_3_4 0xC >> > + >> > #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A >> and C only */ >> > #define _MMIO_MIPI(port, a, c) _MMIO(_MIPI_PORT(port, a, c)) >> > >> > @@ -7650,59 +7701,6 @@ enum skl_disp_power_wells { >> > #define BXT_MIPI_DIV_SHIFT(port) \ >> > _MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \ >> > BXT_MIPI2_DIV_SHIFT) >> > -/* Var clock divider to generate TX source. Result must be < 39.5 M */ >> > -#define BXT_MIPI1_ESCLK_VAR_DIV_MASK (0x3F << 26) >> > -#define BXT_MIPI2_ESCLK_VAR_DIV_MASK (0x3F << 10) >> > -#define BXT_MIPI_ESCLK_VAR_DIV_MASK(port) \ >> > - _MIPI_PORT(port, >> BXT_MIPI1_ESCLK_VAR_DIV_MASK, \ >> > - >> BXT_MIPI2_ESCLK_VAR_DIV_MASK) >> > - >> > -#define BXT_MIPI_ESCLK_VAR_DIV(port, val) \ >> > - (val << BXT_MIPI_DIV_SHIFT(port)) >> > -/* TX control divider to select actual TX clock output from (8x/var) */ >> > -#define BXT_MIPI1_TX_ESCLK_SHIFT 21 >> > -#define BXT_MIPI2_TX_ESCLK_SHIFT 5 >> > -#define BXT_MIPI_TX_ESCLK_SHIFT(port) \ >> > - _MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \ >> > - BXT_MIPI2_TX_ESCLK_SHIFT) >> > -#define BXT_MIPI1_TX_ESCLK_FIXDIV_MASK (3 << 21) >> > -#define BXT_MIPI2_TX_ESCLK_FIXDIV_MASK (3 << 5) >> > -#define BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port) \ >> > - _MIPI_PORT(port, >> BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \ >> > - >> BXT_MIPI2_TX_ESCLK_FIXDIV_MASK) >> > -#define BXT_MIPI_TX_ESCLK_8XDIV_BY2(port) \ >> > - (0x0 << BXT_MIPI_TX_ESCLK_SHIFT(port)) >> > -#define BXT_MIPI_TX_ESCLK_8XDIV_BY4(port) \ >> > - (0x1 << BXT_MIPI_TX_ESCLK_SHIFT(port)) >> > -#define BXT_MIPI_TX_ESCLK_8XDIV_BY8(port) \ >> > - (0x2 << BXT_MIPI_TX_ESCLK_SHIFT(port)) >> > -/* RX control divider to select actual RX clock output from 8x*/ >> > -#define BXT_MIPI1_RX_ESCLK_SHIFT 19 >> > -#define BXT_MIPI2_RX_ESCLK_SHIFT 3 >> > -#define BXT_MIPI_RX_ESCLK_SHIFT(port) \ >> > - _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_SHIFT, \ >> > - BXT_MIPI2_RX_ESCLK_SHIFT) >> > -#define BXT_MIPI1_RX_ESCLK_FIXDIV_MASK (3 << 19) >> > -#define BXT_MIPI2_RX_ESCLK_FIXDIV_MASK (3 << 3) >> > -#define BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port) \ >> > - (3 << BXT_MIPI_RX_ESCLK_SHIFT(port)) >> > -#define BXT_MIPI_RX_ESCLK_8X_BY2(port) \ >> > - (1 << BXT_MIPI_RX_ESCLK_SHIFT(port)) >> > -#define BXT_MIPI_RX_ESCLK_8X_BY3(port) \ >> > - (2 << BXT_MIPI_RX_ESCLK_SHIFT(port)) >> > -#define BXT_MIPI_RX_ESCLK_8X_BY4(port) \ >> > - (3 << BXT_MIPI_RX_ESCLK_SHIFT(port)) >> > -/* BXT-A WA: Always prog DPHY dividers to 00 */ >> > -#define BXT_MIPI1_DPHY_DIV_SHIFT 16 >> > -#define BXT_MIPI2_DPHY_DIV_SHIFT 0 >> > -#define BXT_MIPI_DPHY_DIV_SHIFT(port) \ >> > - _MIPI_PORT(port, BXT_MIPI1_DPHY_DIV_SHIFT, \ >> > - BXT_MIPI2_DPHY_DIV_SHIFT) >> > -#define BXT_MIPI_1_DPHY_DIVIDER_MASK (3 << 16) >> > -#define BXT_MIPI_2_DPHY_DIVIDER_MASK (3 << 0) >> > -#define BXT_MIPI_DPHY_DIVIDER_MASK(port) \ >> > - (3 << BXT_MIPI_DPHY_DIV_SHIFT(port)) >> > - >> > /* BXT MIPI mode configure */ >> > #define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8 >> > #define _BXT_MIPIC_TRANS_HACTIVE 0x6B8F8 >> > diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c >> > b/drivers/gpu/drm/i915/intel_dsi_pll.c >> > index bb5e95a..7435115 100644 >> > --- a/drivers/gpu/drm/i915/intel_dsi_pll.c >> > +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c >> > @@ -362,35 +362,59 @@ static void vlv_dsi_reset_clocks(struct >> > intel_encoder *encoder, enum port port) >> > /* Program BXT Mipi clocks and dividers */ static void >> > bxt_dsi_program_clocks(struct drm_device *dev, enum port port) { >> > - u32 tmp; >> > - u32 divider; >> > - u32 dsi_rate; >> > - u32 pll_ratio; >> > struct drm_i915_private *dev_priv = dev->dev_private; >> > + u32 tmp; >> > + u32 dsi_rate = 0; >> > + u32 pll_ratio = 0; >> > + u32 rx_div; >> > + u32 tx_div; >> > + u32 rx_div_upper; >> > + u32 rx_div_lower; >> > + u32 mipi_8by3_divider; >> > >> > /* Clear old configurations */ >> > tmp = I915_READ(BXT_MIPI_CLOCK_CTL); >> > - tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_RX_LOWER_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_RX_UPPER_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_TX_DIVIDER_MASK(port)); >> > >> > /* Get the current DSI rate(actual) */ >> > pll_ratio = I915_READ(BXT_DSI_PLL_CTL) & >> > - BXT_DSI_PLL_RATIO_MASK; >> > + BXT_DSI_PLL_RATIO_MASK; >> > + >> > + /* To get 8X clock, divide ref_freq * pll ratio by 2 as per bspec */ >> > dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2; >> > >> > - /* Max possible output of clock is 39.5 MHz, program value -1 */ >> > - divider = (dsi_rate / BXT_MAX_VAR_OUTPUT_KHZ) - 1; >> > - tmp |= BXT_MIPI_ESCLK_VAR_DIV(port, divider); >> > + /* >> > + * tx clock should be <= 20MHz and the div value must be >> > + * subtracted by 1 as per bspec >> > + */ >> > + tx_div = DIV_ROUND_UP(dsi_rate, 20000) - 1; >> > + /* >> > + * rx clock should be <= 150MHz and the div value must be >> > + * subtracted by 1 as per bspec >> > + */ >> > + rx_div = DIV_ROUND_UP(dsi_rate, 150000) - 1; >> > >> > /* >> > - * Tx escape clock must be as close to 20MHz possible, but should >> > - * not exceed it. Hence select divide by 2 >> > + * rx divider value needs to be updated in the >> > + * two differnt bit fields in the register hence splitting the >> > + * rx divider value accordingly >> > */ >> > - tmp |= BXT_MIPI_TX_ESCLK_8XDIV_BY2(port); >> > + rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2; >> > + rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2; >> > + >> > + /* As per bpsec program the 8/3X clock divider to the below value */ >> > + if (dev_priv->vbt.dsi.config->is_cmd_mode) >> > + mipi_8by3_divider = 0x2; >> > + else >> > + mipi_8by3_divider = 0x3; >> > >> > - tmp |= BXT_MIPI_RX_ESCLK_8X_BY3(port); >> > + tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider); >> > + tmp |= BXT_MIPI_TX_DIVIDER(port, tx_div); >> > + tmp |= BXT_MIPI_RX_LOWER_DIVIDER(port, rx_div_lower); >> > + tmp |= BXT_MIPI_RX_UPPER_DIVIDER(port, rx_div_upper); >> > >> > I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); } @@ -512,10 +536,10 >> @@ static >> > void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port >> > port) >> > >> > /* Clear old configurations */ >> > tmp = I915_READ(BXT_MIPI_CLOCK_CTL); >> > - tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port)); >> > - tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_RX_LOWER_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_RX_UPPER_DIVIDER_MASK(port)); >> > + tmp &= ~(BXT_MIPI_TX_DIVIDER_MASK(port)); >> > I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); >> > I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); } >> >> -- >> Jani Nikula, Intel Open Source Technology Center -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx