On Tue, 12 Apr 2016, ville.syrj...@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Set up DPLL and DPLL_MD even when driving DSI output on VLV/CHV. While
> the DPLL isn't used to provide the clock we still need the refclock, and
> it appears that the pixel repeat factor also has an effect on DSI
> output. So set up eveyrhing in DPLL and DPLL_MD as we would do for
> DP/HDMI/VGA, but don't actually enable the DPLL or configure the
> dividers via DPIO.
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nik...@intel.com>
I quickly glanced over 2-5 too, my earlier r-b on them still stand.
> ---
> drivers/gpu/drm/i915/intel_display.c | 120
> +++++++++++++++++++++--------------
> drivers/gpu/drm/i915/intel_dsi.c | 28 ++------
> 2 files changed, 80 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 607dc41bcc68..7c74a930f45d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1530,45 +1530,47 @@ static void assert_pch_ports_disabled(struct
> drm_i915_private *dev_priv,
> assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
> }
>
> +static void _vlv_enable_pll(struct intel_crtc *crtc,
> + const struct intel_crtc_state *pipe_config)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + enum pipe pipe = crtc->pipe;
> +
> + I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
> + POSTING_READ(DPLL(pipe));
> + udelay(150);
> +
> + if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) ==
> DPLL_LOCK_VLV), 1))
> + DRM_ERROR("DPLL %d failed to lock\n", pipe);
> +}
> +
> static void vlv_enable_pll(struct intel_crtc *crtc,
> const struct intel_crtc_state *pipe_config)
> {
> - struct drm_device *dev = crtc->base.dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> enum pipe pipe = crtc->pipe;
> - i915_reg_t reg = DPLL(pipe);
> - u32 dpll = pipe_config->dpll_hw_state.dpll;
>
> assert_pipe_disabled(dev_priv, pipe);
>
> /* PLL is protected by panel, make sure we can write it */
> assert_panel_unlocked(dev_priv, pipe);
>
> - I915_WRITE(reg, dpll);
> - POSTING_READ(reg);
> - udelay(150);
> -
> - if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
> - DRM_ERROR("DPLL %d failed to lock\n", pipe);
> + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
> + _vlv_enable_pll(crtc, pipe_config);
>
> I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
> POSTING_READ(DPLL_MD(pipe));
> }
>
> -static void chv_enable_pll(struct intel_crtc *crtc,
> - const struct intel_crtc_state *pipe_config)
> +
> +static void _chv_enable_pll(struct intel_crtc *crtc,
> + const struct intel_crtc_state *pipe_config)
> {
> - struct drm_device *dev = crtc->base.dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> enum pipe pipe = crtc->pipe;
> enum dpio_channel port = vlv_pipe_to_channel(pipe);
> u32 tmp;
>
> - assert_pipe_disabled(dev_priv, pipe);
> -
> - /* PLL is protected by panel, make sure we can write it */
> - assert_panel_unlocked(dev_priv, pipe);
> -
> mutex_lock(&dev_priv->sb_lock);
>
> /* Enable back the 10bit clock to display controller */
> @@ -1589,6 +1591,21 @@ static void chv_enable_pll(struct intel_crtc *crtc,
> /* Check PLL is locked */
> if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) ==
> DPLL_LOCK_VLV), 1))
> DRM_ERROR("PLL %d failed to lock\n", pipe);
> +}
> +
> +static void chv_enable_pll(struct intel_crtc *crtc,
> + const struct intel_crtc_state *pipe_config)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + enum pipe pipe = crtc->pipe;
> +
> + assert_pipe_disabled(dev_priv, pipe);
> +
> + /* PLL is protected by panel, make sure we can write it */
> + assert_panel_unlocked(dev_priv, pipe);
> +
> + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
> + _chv_enable_pll(crtc, pipe_config);
>
> if (pipe != PIPE_A) {
> /*
> @@ -6073,14 +6090,12 @@ static void valleyview_crtc_enable(struct drm_crtc
> *crtc)
> if (encoder->pre_pll_enable)
> encoder->pre_pll_enable(encoder);
>
> - if (!intel_crtc->config->has_dsi_encoder) {
> - if (IS_CHERRYVIEW(dev)) {
> - chv_prepare_pll(intel_crtc, intel_crtc->config);
> - chv_enable_pll(intel_crtc, intel_crtc->config);
> - } else {
> - vlv_prepare_pll(intel_crtc, intel_crtc->config);
> - vlv_enable_pll(intel_crtc, intel_crtc->config);
> - }
> + if (IS_CHERRYVIEW(dev)) {
> + chv_prepare_pll(intel_crtc, intel_crtc->config);
> + chv_enable_pll(intel_crtc, intel_crtc->config);
> + } else {
> + vlv_prepare_pll(intel_crtc, intel_crtc->config);
> + vlv_enable_pll(intel_crtc, intel_crtc->config);
> }
>
> for_each_encoder_on_crtc(dev, crtc, encoder)
> @@ -6118,7 +6133,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
> struct intel_encoder *encoder;
> struct intel_crtc_state *pipe_config =
> to_intel_crtc_state(crtc->state);
> - int pipe = intel_crtc->pipe;
> + enum pipe pipe = intel_crtc->pipe;
>
> if (WARN_ON(intel_crtc->active))
> return;
> @@ -7174,11 +7189,15 @@ static void vlv_compute_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
> - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
> - DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV;
> + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
> if (crtc->pipe != PIPE_A)
> pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
>
> + /* DPLL not used with DSI, but still need the rest set up */
> + if (!intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_DSI))
> + pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
> + DPLL_EXT_BUFFER_ENABLE_VLV;
> +
> pipe_config->dpll_hw_state.dpll_md =
> (pipe_config->pixel_multiplier - 1) <<
> DPLL_MD_UDI_MULTIPLIER_SHIFT;
> }
> @@ -7187,11 +7206,14 @@ static void chv_compute_dpll(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
> - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
> - DPLL_VCO_ENABLE;
> + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
> if (crtc->pipe != PIPE_A)
> pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
>
> + /* DPLL not used with DSI, but still need the rest set up */
> + if (!intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_DSI))
> + pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
> +
> pipe_config->dpll_hw_state.dpll_md =
> (pipe_config->pixel_multiplier - 1) <<
> DPLL_MD_UDI_MULTIPLIER_SHIFT;
> }
> @@ -7201,11 +7223,20 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - int pipe = crtc->pipe;
> + enum pipe pipe = crtc->pipe;
> u32 mdiv;
> u32 bestn, bestm1, bestm2, bestp1, bestp2;
> u32 coreclk, reg_val;
>
> + /* Enable Refclk */
> + I915_WRITE(DPLL(pipe),
> + pipe_config->dpll_hw_state.dpll &
> + ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
> +
> + /* No need to actually set up the DPLL with DSI */
> + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
> + return;
> +
> mutex_lock(&dev_priv->sb_lock);
>
> bestn = pipe_config->dpll.n;
> @@ -7292,14 +7323,21 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - int pipe = crtc->pipe;
> - i915_reg_t dpll_reg = DPLL(crtc->pipe);
> + enum pipe pipe = crtc->pipe;
> enum dpio_channel port = vlv_pipe_to_channel(pipe);
> u32 loopfilter, tribuf_calcntr;
> u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
> u32 dpio_val;
> int vco;
>
> + /* Enable Refclk and SSC */
> + I915_WRITE(DPLL(pipe),
> + pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
> +
> + /* No need to actually set up the DPLL with DSI */
> + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
> + return;
> +
> bestn = pipe_config->dpll.n;
> bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
> bestm1 = pipe_config->dpll.m1;
> @@ -7310,12 +7348,6 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
> dpio_val = 0;
> loopfilter = 0;
>
> - /*
> - * Enable Refclk and SSC
> - */
> - I915_WRITE(dpll_reg,
> - pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
> -
> mutex_lock(&dev_priv->sb_lock);
>
> /* p1 and p2 divider */
> @@ -7930,9 +7962,6 @@ static int chv_crtc_compute_clock(struct intel_crtc
> *crtc,
> memset(&crtc_state->dpll_hw_state, 0,
> sizeof(crtc_state->dpll_hw_state));
>
> - if (crtc_state->has_dsi_encoder)
> - return 0;
> -
> if (!crtc_state->clock_set &&
> !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
> refclk, NULL, &crtc_state->dpll)) {
> @@ -7954,9 +7983,6 @@ static int vlv_crtc_compute_clock(struct intel_crtc
> *crtc,
> memset(&crtc_state->dpll_hw_state, 0,
> sizeof(crtc_state->dpll_hw_state));
>
> - if (crtc_state->has_dsi_encoder)
> - return 0;
> -
> if (!crtc_state->clock_set &&
> !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
> refclk, NULL, &crtc_state->dpll)) {
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 9ff6435e7d38..22bd42a8aab0 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -311,6 +311,12 @@ static bool intel_dsi_compute_config(struct
> intel_encoder *encoder,
> pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
> }
>
> + /*
> + * FIXME move the DSI PLL calc from vlv_enable_dsi_pll()
> + * to .compute_config().
> + */
> + pipe_config->clock_set = true;
> +
> return true;
> }
>
> @@ -498,8 +504,6 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder)
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> - enum pipe pipe = intel_crtc->pipe;
> enum port port;
> u32 tmp;
>
> @@ -521,19 +525,7 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder)
> msleep(intel_dsi->panel_on_delay);
>
> if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
> - /*
> - * Disable DPOunit clock gating, can stall pipe
> - * and we need DPLL REFA always enabled
> - */
> - tmp = I915_READ(DPLL(pipe));
> - tmp |= DPLL_REF_CLK_ENABLE_VLV;
> - I915_WRITE(DPLL(pipe), tmp);
> -
> - /* update the hw state for DPLL */
> - intel_crtc->config->dpll_hw_state.dpll =
> - DPLL_INTEGRATED_REF_CLK_VLV |
> - DPLL_REF_CLK_ENABLE_VLV |
> DPLL_VGA_MODE_DIS;
> -
> + /* Disable DPOunit clock gating, can stall pipe */
> tmp = I915_READ(DSPCLK_GATE_D);
> tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
> I915_WRITE(DSPCLK_GATE_D, tmp);
> @@ -832,12 +824,6 @@ static void intel_dsi_get_config(struct intel_encoder
> *encoder,
> if (IS_BROXTON(dev))
> bxt_dsi_get_pipe_config(encoder, pipe_config);
>
> - /*
> - * DPLL_MD is not used in case of DSI, reading will get some default
> value
> - * set dpll_md = 0
> - */
> - pipe_config->dpll_hw_state.dpll_md = 0;
> -
> pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp);
> if (!pclk)
> return;
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
