On Fri, Apr 15, 2016 at 03:40:10PM -0400, Lyude wrote: > While VGA hotplugging worked(ish) before, it looks like that was mainly > because we'd unintentionally enable it in > valleyview_crt_detect_hotplug() when we did a force trigger. This > doesn't work reliably enough because whenever the display powerwell on > vlv gets disabled, the values set in VLV_ADPA get cleared and > consequently VGA hotplugging gets disabled. This causes bugs such as one > we found on an Intel NUC, where doing the following sequence of > hotplugs: > > - Disconnect all monitors > - Connect VGA > - Disconnect VGA > - Connect HDMI > > Would result in VGA hotplugging becoming disabled, due to the powerwells > getting toggled in the process of connecting HDMI. > > Changes since v1: > - Instead of handling the register writes ourself, we just reuse > intel_crt_detect() > - Instead of resetting the ADPA during display IRQ installation, we now > reset them in vlv_display_power_well_init() > > CC: sta...@vger.kernel.org > Signed-off-by: Lyude <cp...@redhat.com> > --- > drivers/gpu/drm/i915/intel_runtime_pm.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c > b/drivers/gpu/drm/i915/intel_runtime_pm.c > index 80e8bd4..c7d195f 100644 > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c > @@ -902,6 +902,7 @@ static bool vlv_power_well_enabled(struct > drm_i915_private *dev_priv, > > static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) > { > + struct drm_encoder *encoder, *vga_encoder = NULL; > enum pipe pipe; > > /* > @@ -935,6 +936,17 @@ static void vlv_display_power_well_init(struct > drm_i915_private *dev_priv) > > intel_hpd_init(dev_priv); > > + /* Re-enable the ADPA, if we have one */ > + drm_for_each_encoder(encoder, dev_priv->dev) { > + if (encoder->encoder_type == DRM_MODE_ENCODER_DAC) { > + vga_encoder = encoder; > + break; > + } > + } > + > + if (vga_encoder && vga_encoder->funcs->reset) > + vga_encoder->funcs->reset(vga_encoder); > +
Something like struct intel_encoder *encoder; ... for_each_intel_encoder(encoder) { if (encoder->type == ANALOG) intel_crt_reset(&encoder->base); } would be neater in my eyes. > i915_redisable_vga_power_on(dev_priv->dev); > } > > -- > 2.5.5 -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx