Both execlists and legacy need to reset the context (and mode) of the
GPU before we lose control of the system. By resetting the GPU, we
revert back to default settings. This simplifies the life of any
subsequent driver (in particular for virtualized setups) as it does not
then have to try and recover from an unknown condition. As both paths
need to reset for the same reason, move the reset to a common point.
This unifies the resets added in a647828afc (drm/i915: Also perform gpu
reset under execlist mode) and 8e96d9c4d9 (drm/i915: reset the GPU on
context fini).
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursu...@linux.intel.com>
CC: Joonas Lahtinen <joonas.lahti...@linux.intel.com>
Cc: Mika Kuoppala <mika.kuopp...@intel.com>
Cc: "Niu, Bing" <bing....@intel.com>
---
drivers/gpu/drm/i915/i915_dma.c | 41 ++++++++++++++++++++++++++-------
drivers/gpu/drm/i915/i915_gem.c | 8 -------
drivers/gpu/drm/i915/i915_gem_context.c | 8 +------
3 files changed, 34 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5c7615041b31..68c60f4fd44d 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -425,6 +425,37 @@ static const struct vga_switcheroo_client_ops
i915_switcheroo_ops = {
.can_switch = i915_switcheroo_can_switch,
};
+static void i915_gem_fini(struct drm_device *dev)
+{
+ int reset;
+
+ /*
+ * Neither the BIOS, ourselves or any other kernel
+ * expects the system to be in execlists mode on startup,
+ * so we need to reset the GPU back to legacy mode. And the only
+ * known way to disable logical contexts is through a GPU reset.
+ *
+ * So in order to leave the system in a known default configuration,
+ * always reset the GPU upon unload. Afterwards we then clean up the
+ * GEM state tracking, flushing off the requests and leaving the
+ * system in a known idle state.
+ *
+ * Note that is of the upmost importance that the GPU is idle and
+ * all stray writes are flushed *before* we dismantle the backing
+ * storage for the pinned objects.
+ */
+ reset = intel_gpu_reset(dev, ALL_ENGINES);
+ WARN_ON(reset && reset != -ENODEV);
+
+ mutex_lock(&dev->struct_mutex);
+ i915_gem_reset(dev);
+ i915_gem_cleanup_engines(dev);
+ i915_gem_context_fini(dev);
+ mutex_unlock(&dev->struct_mutex);
+
+ WARN_ON(!list_empty(&to_i915(dev)->context_list));
+}
+
static int i915_load_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -506,10 +537,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
return 0;
cleanup_gem:
- mutex_lock(&dev->struct_mutex);
- i915_gem_cleanup_engines(dev);
- i915_gem_context_fini(dev);
- mutex_unlock(&dev->struct_mutex);
+ i915_gem_fini(dev);
cleanup_irq:
intel_guc_ucode_fini(dev);
drm_irq_uninstall(dev);
@@ -1456,10 +1484,7 @@ int i915_driver_unload(struct drm_device *dev)
flush_workqueue(dev_priv->wq);
intel_guc_ucode_fini(dev);
- mutex_lock(&dev->struct_mutex);
- i915_gem_cleanup_engines(dev);
- i915_gem_context_fini(dev);
- mutex_unlock(&dev->struct_mutex);
+ i915_gem_fini(dev);
intel_fbc_cleanup_cfb(dev_priv);
intel_power_domains_fini(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index a88aa7f11a9c..82e41eeb36bb 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4970,14 +4970,6 @@ i915_gem_cleanup_engines(struct drm_device *dev)
for_each_engine(engine, dev_priv)
dev_priv->gt.cleanup_engine(engine);
-
- if (i915.enable_execlists)
- /*
- * Neither the BIOS, ourselves or any other kernel
- * expects the system to be in execlists mode on startup,
- * so we need to reset the GPU back to legacy mode.
- */
- intel_gpu_reset(dev, ALL_ENGINES);
}
static void
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c
b/drivers/gpu/drm/i915/i915_gem_context.c
index fef33a3ce3b7..26122de365b2 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -452,14 +452,8 @@ void i915_gem_context_fini(struct drm_device *dev)
i915_gem_context_lost(dev_priv);
- if (dctx->legacy_hw_ctx.rcs_state) {
- /* The only known way to stop the gpu from accessing the hw
context is
- * to reset it. Do this as the very last operation to avoid
confusing
- * other code, leading to spurious errors. */
- intel_gpu_reset(dev, ALL_ENGINES);
-
+ if (dctx->legacy_hw_ctx.rcs_state)
i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state);
- }
i915_gem_context_unreference(dctx);
dev_priv->kernel_context = NULL;
--
2.8.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
