This patch includes enabling render decompression (RC) after checking all the requirements (format, tiling, rotation etc.).
TODO: 1. Disable stereo 3D when render decomp is enabled (bit 7:6) 2. Render decompression must not be used in VTd pass-through mode 3. Program hashing select CHICKEN_MISC1 bit 15 4. For Gen10, add support for RGB 1010102 5. RC-FBC workaround 6. RC watermark calculation The reason for using a plane property instead of fb modifier:- In Android, OGL passes a render compressed buffer to hardware composer (HWC), which would then request a flip on that buffer after checking if the target can support render compressed buffer. For example, only planes 1 and 2 on pipes 1 and 2 can support RC. In case the target cannot support it, HWC will revert back to OGL requesting for uncompressed buffer. Here, if plane property is used, OGL would send back the buffer (same ID) after decompression, marked uncompressed. If fb modifier was used, a different version of the buffer would have to be maintained for different combinations - in the simple case of render compressed vs uncompressed buffer, there would be 2 fbs with 2 IDs. So, in this case, OGL would give a reference to a fb with a different ID. To avoid the difficulty of keeping track of multiple fbs and the subsequent complexity in debug, the architecture forum decided to go ahead with a plane property for RC. [Mayuresh] Added the plane check in skl_check_compression() v2: Ville's review comments addressed - Removed WAs specific to SKL-C and BXT-A - Assign capabilities according to pipe and plane during property creation - in skl_check_compression(), check for conditions that must be satisifed Maintaining the check for pixel format, even though compressed fb of format other RGB8888 should not have been created, to be on the safer side. Added checks for BGR8888 too. Bitmask is being used for the property to accommodate 2 more options expected to be added in future. This patch depends on Ville's patch series on fb->offsets. (Ref: git://github.com/vsyrjala/linux.git fb_offsets_14) Testing is in progress for v2 of the patch. Signed-off-by: Vandana Kannan <vandana.kan...@intel.com> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com> Cc: Smith, Gary K <gary.k.sm...@intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 22 +++++ drivers/gpu/drm/i915/intel_atomic_plane.c | 24 +++++- drivers/gpu/drm/i915/intel_display.c | 135 +++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_drv.h | 10 +++ drivers/gpu/drm/i915/intel_sprite.c | 27 +++++- 6 files changed, 213 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 32f0597..ba32e7c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1901,6 +1901,7 @@ struct drm_i915_private { struct drm_property *broadcast_rgb_property; struct drm_property *force_audio_property; + struct drm_property *render_comp_property; /* hda/i915 audio component */ struct i915_audio_component *audio_component; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25e229b..da45cc9 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -5816,6 +5816,28 @@ enum skl_disp_power_wells { _ID(id, _PS_ECC_STAT_1A, _PS_ECC_STAT_2A), \ _ID(id, _PS_ECC_STAT_1B, _PS_ECC_STAT_2B)) +#define PLANE_AUX_DIST_1_A 0x701c0 +#define PLANE_AUX_DIST_2_A 0x702c0 +#define PLANE_AUX_DIST_1_B 0x711c0 +#define PLANE_AUX_DIST_2_B 0x712c0 +#define _PLANE_AUX_DIST_1(pipe) \ + _PIPE(pipe, PLANE_AUX_DIST_1_A, PLANE_AUX_DIST_1_B) +#define _PLANE_AUX_DIST_2(pipe) \ + _PIPE(pipe, PLANE_AUX_DIST_2_A, PLANE_AUX_DIST_2_B) +#define PLANE_AUX_DIST(pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe)) + +#define PLANE_AUX_OFFSET_1_A 0x701c4 +#define PLANE_AUX_OFFSET_2_A 0x702c4 +#define PLANE_AUX_OFFSET_1_B 0x711c4 +#define PLANE_AUX_OFFSET_2_B 0x712c4 +#define _PLANE_AUX_OFFSET_1(pipe) \ + _PIPE(pipe, PLANE_AUX_OFFSET_1_A, PLANE_AUX_OFFSET_1_B) +#define _PLANE_AUX_OFFSET_2(pipe) \ + _PIPE(pipe, PLANE_AUX_OFFSET_2_A, PLANE_AUX_OFFSET_2_B) +#define PLANE_AUX_OFFSET(pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe)) + /* legacy palette */ #define _LGC_PALETTE_A 0x4a000 #define _LGC_PALETTE_B 0x4a800 diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c index 7de7721..2617b75 100644 --- a/drivers/gpu/drm/i915/intel_atomic_plane.c +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c @@ -228,8 +228,16 @@ intel_plane_atomic_get_property(struct drm_plane *plane, struct drm_property *property, uint64_t *val) { - DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name); - return -EINVAL; + struct drm_i915_private *dev_priv = state->plane->dev->dev_private; + struct intel_plane_state *intel_state = to_intel_plane_state(state); + + if (property == dev_priv->render_comp_property) { + *val = intel_state->render_comp_enable; + } else { + DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name); + return -EINVAL; + } + return 0; } /** @@ -250,6 +258,14 @@ intel_plane_atomic_set_property(struct drm_plane *plane, struct drm_property *property, uint64_t val) { - DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name); - return -EINVAL; + struct drm_i915_private *dev_priv = state->plane->dev->dev_private; + struct intel_plane_state *intel_state = to_intel_plane_state(state); + + if (property == dev_priv->render_comp_property) { + intel_state->render_comp_enable = val; + } else { + DRM_DEBUG_KMS("Unknown plane property '%s'\n", property->name); + return -EINVAL; + } + return 0; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bfcc2eb..9b2ff21 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -117,6 +117,9 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force); static void ironlake_pfit_enable(struct intel_crtc *crtc); static void intel_modeset_setup_hw_state(struct drm_device *dev); static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc); +static int skl_check_compression(struct drm_device *dev, + struct intel_plane_state *plane_state, + enum pipe pipe, int x, int y); typedef struct { int min, max; @@ -3045,7 +3048,7 @@ static void skylake_update_primary_plane(struct drm_plane *plane, int pipe = intel_crtc->pipe; u32 plane_ctl, stride_div, stride; u32 tile_height, plane_offset, plane_size; - unsigned int rotation = plane_state->base.rotation; + unsigned int rotation = plane_state->base.rotation, render_comp; int x_offset, y_offset; u32 surf_addr; int scaler_id = plane_state->scaler_id; @@ -3057,6 +3060,9 @@ static void skylake_update_primary_plane(struct drm_plane *plane, int dst_y = plane_state->dst.y1; int dst_w = drm_rect_width(&plane_state->dst); int dst_h = drm_rect_height(&plane_state->dst); + unsigned long aux_dist = 0; + u32 aux_x_offset = 0, aux_y_offset = 0, aux_stride = 0; + u32 tile_row_adjustment = 0, height_in_mem = 0; plane_ctl = PLANE_CTL_ENABLE | PLANE_CTL_PIPE_GAMMA_ENABLE | @@ -3093,10 +3099,28 @@ static void skylake_update_primary_plane(struct drm_plane *plane, intel_crtc->adjusted_x = x_offset; intel_crtc->adjusted_y = y_offset; + render_comp = plane_state->render_comp_enable; + if (render_comp) { + int cpp = drm_format_plane_cpp(fb->pixel_format, 0); + + tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp); + + height_in_mem = (fb->offsets[1]/fb->pitches[0]); + tile_row_adjustment = height_in_mem % tile_height; + aux_dist = (fb->pitches[0] * + (height_in_mem - tile_row_adjustment)); + aux_stride = skl_plane_stride(fb, 1, rotation); + plane_ctl |= PLANE_CTL_DECOMPRESSION_ENABLE; + } else { + plane_ctl &= ~PLANE_CTL_DECOMPRESSION_ENABLE; + } + I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl); I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset); I915_WRITE(PLANE_SIZE(pipe, 0), plane_size); I915_WRITE(PLANE_STRIDE(pipe, 0), stride); + I915_WRITE(PLANE_AUX_DIST(pipe, 0), aux_dist | aux_stride); + I915_WRITE(PLANE_AUX_OFFSET(pipe, 0), aux_y_offset<<16 | aux_x_offset); if (scaler_id >= 0) { uint32_t ps_ctrl = 0; @@ -11856,6 +11880,17 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state, return ret; } + if (fb && to_intel_plane_state(plane_state)-> + render_comp_enable) { + ret = skl_check_compression(dev, + to_intel_plane_state(plane_state), + intel_crtc->pipe, crtc->x, crtc->y); + if (ret) { + DRM_DEBUG_KMS("Render compr checks failed\n"); + return ret; + } + } + was_visible = old_plane_state->visible; visible = to_intel_plane_state(plane_state)->visible; @@ -13972,6 +14007,63 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state return max_scale; } +static int skl_check_compression(struct drm_device *dev, + struct intel_plane_state *plane_state, + enum pipe pipe, int x, int y) +{ + struct drm_framebuffer *fb = plane_state->base.fb; + int x_offset; + int src_w = drm_rect_width(&plane_state->src) >> 16; + + if (!IS_SKYLAKE(dev) && !IS_BROXTON(dev)) { + DRM_DEBUG_KMS("RC support on CNL+ needs to be revisited\n"); + return -EINVAL; + } + + /* + * TODO: + * 1. Disable stereo 3D when render decomp is enabled (bit 7:6) + * 2. Render decompression must not be used in VTd pass-through mode + * 3. Program hashing select CHICKEN_MISC1 bit 15 + */ + + if (plane_state->base.rotation & + ~(BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_180))) { + DRM_DEBUG_KMS("RC support only with 0/180 degree rotation\n"); + return -EINVAL; + } + + if ((fb->modifier[0] != I915_FORMAT_MOD_Y_TILED) && + (fb->modifier[0] != I915_FORMAT_MOD_Yf_TILED)) { + DRM_DEBUG_KMS("RC supported only with Y-tile\n"); + return -EINVAL; + } + + if ((fb->pixel_format != DRM_FORMAT_XBGR8888) && + (fb->pixel_format != DRM_FORMAT_ABGR8888) && + (fb->pixel_format != DRM_FORMAT_XRGB8888) && + (fb->pixel_format != DRM_FORMAT_ARGB8888)) { + DRM_DEBUG_KMS("RC supported only with RGB8888 formats\n"); + return -EINVAL; + } + + /* + * For SKL & BXT, + * When the render compression is enabled with plane + * width greater than 3840 and horizontal panning, + * the stride programmed in the PLANE_STRIDE register + * must be multiple of 4. + */ + x_offset = x; + + if (src_w > 3840 && x_offset != 0) { + DRM_DEBUG_KMS("RC: width > 3840, horizontal panning\n"); + return -EINVAL; + } + + return 0; +} + static int intel_check_primary_plane(struct drm_plane *plane, struct intel_crtc_state *crtc_state, @@ -14126,6 +14218,9 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, if (INTEL_INFO(dev)->gen >= 4) intel_create_rotation_property(dev, primary); + if (INTEL_INFO(dev)->gen >= 9) + intel_create_render_comp_property(dev, primary); + drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs); return &primary->base; @@ -14155,6 +14250,44 @@ void intel_create_rotation_property(struct drm_device *dev, struct intel_plane * plane->base.state->rotation); } +void intel_create_render_comp_property(struct drm_device *dev, + struct intel_plane *plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_plane *drm_plane = &plane->base; + unsigned long flags = BIT(COMP_UNCOMPRESSED); + + static const struct drm_prop_enum_list rc_status[] = { + { COMP_UNCOMPRESSED, "Uncompressed/not capable" }, + { COMP_RENDER, "Only render decompression" }, + }; + + if (plane->pipe != PIPE_C || + (drm_plane->type == DRM_PLANE_TYPE_PRIMARY || + (drm_plane->type == DRM_PLANE_TYPE_OVERLAY && + plane->plane == PLANE_A))) { + flags |= BIT(COMP_RENDER); + } + + if (!dev_priv->render_comp_property) { + dev_priv->render_comp_property = + drm_property_create_bitmask(dev, 0, + "render compression", + rc_status, ARRAY_SIZE(rc_status), + flags); + if (!dev_priv->render_comp_property) { + DRM_ERROR("RC: Failed to create property\n"); + return; + } + } + + if (dev_priv->render_comp_property) { + drm_object_attach_property(&plane->base.base, + dev_priv->render_comp_property, 0); + } + dev->mode_config.allow_aux_plane = true; +} + static int intel_check_cursor_plane(struct drm_plane *plane, struct intel_crtc_state *crtc_state, diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cf27989..38006e7 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -303,6 +303,10 @@ struct intel_atomic_state { bool skip_intermediate_wm; }; +/* render compression property bits */ +#define COMP_UNCOMPRESSED 0 +#define COMP_RENDER 1 + struct intel_plane_state { struct drm_plane_state base; struct drm_rect src; @@ -334,6 +338,9 @@ struct intel_plane_state { /* async flip related structures */ struct drm_i915_gem_request *wait_req; + + /* Render compression */ + unsigned int render_comp_enable; }; struct intel_initial_plane_config { @@ -1196,6 +1203,9 @@ intel_rotation_90_or_270(unsigned int rotation) void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane); +void intel_create_render_comp_property(struct drm_device *dev, + struct intel_plane *plane); + void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, enum pipe pipe); diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 0f3e230..2593bcf 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -193,7 +193,7 @@ skl_update_plane(struct drm_plane *drm_plane, const struct drm_intel_sprite_colorkey *key = &plane_state->ckey; u32 surf_addr; u32 tile_height, plane_offset, plane_size; - unsigned int rotation = plane_state->base.rotation; + unsigned int rotation = plane_state->base.rotation, render_comp; int x_offset, y_offset; int crtc_x = plane_state->dst.x1; int crtc_y = plane_state->dst.y1; @@ -205,6 +205,9 @@ skl_update_plane(struct drm_plane *drm_plane, uint32_t src_h = drm_rect_height(&plane_state->src) >> 16; const struct intel_scaler *scaler = &crtc_state->scaler_state.scalers[plane_state->scaler_id]; + unsigned long aux_dist = 0; + u32 aux_x_offset = 0, aux_y_offset = 0, aux_stride = 0; + u32 tile_row_adjustment = 0, height_in_mem = 0; plane_ctl = PLANE_CTL_ENABLE | PLANE_CTL_PIPE_GAMMA_ENABLE | @@ -254,9 +257,28 @@ skl_update_plane(struct drm_plane *drm_plane, } plane_offset = y_offset << 16 | x_offset; + render_comp = plane_state->render_comp_enable; + if (render_comp) { + int cpp = drm_format_plane_cpp(fb->pixel_format, 0); + + tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp); + + height_in_mem = (fb->offsets[1]/fb->pitches[0]); + tile_row_adjustment = height_in_mem % tile_height; + aux_dist = (fb->pitches[0] * + (height_in_mem - tile_row_adjustment)); + aux_stride = skl_plane_stride(fb, 1, rotation); + plane_ctl |= PLANE_CTL_DECOMPRESSION_ENABLE; + } else { + plane_ctl &= ~PLANE_CTL_DECOMPRESSION_ENABLE; + } + I915_WRITE(PLANE_OFFSET(pipe, plane), plane_offset); I915_WRITE(PLANE_STRIDE(pipe, plane), stride); I915_WRITE(PLANE_SIZE(pipe, plane), plane_size); + I915_WRITE(PLANE_AUX_DIST(pipe, plane), aux_dist | aux_stride); + I915_WRITE(PLANE_AUX_OFFSET(pipe, plane), + aux_y_offset<<16 | aux_x_offset); /* program plane scaler */ if (plane_state->scaler_id >= 0) { @@ -1120,6 +1142,9 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane) intel_create_rotation_property(dev, intel_plane); + if (INTEL_INFO(dev)->gen >= 9) + intel_create_render_comp_property(dev, intel_plane); + drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs); return 0; -- 1.9.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx