On 21/06/16 19:11, Peter Antoine wrote:
From: Alex Dai <yu....@intel.com>
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.
HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.
Signed-off-by: Alex Dai <yu....@intel.com>
Signed-off-by: Peter Antoine <peter.anto...@intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_dma.c | 3 +
drivers/gpu/drm/i915/i915_drv.h | 3 +
drivers/gpu/drm/i915/i915_gem.c | 13 +-
drivers/gpu/drm/i915/i915_guc_reg.h | 3 +
drivers/gpu/drm/i915/intel_guc.h | 1 +
drivers/gpu/drm/i915/intel_guc_loader.c | 11 +-
drivers/gpu/drm/i915/intel_huc.h | 44 ++++++
drivers/gpu/drm/i915/intel_huc_loader.c | 262 ++++++++++++++++++++++++++++++++
9 files changed, 331 insertions(+), 10 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_huc.h
create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 276abf1..7384db0 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -44,6 +44,7 @@ i915-y += i915_cmd_parser.o \
# general-purpose microcontroller (GuC) support
i915-y += intel_guc_loader.o \
+ intel_huc_loader.o \
i915_guc_submission.o
# autogenerated null render state
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index e28c0dd..a449a59 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -507,6 +507,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
* working irqs for e.g. gmbus and dp aux transfers. */
intel_modeset_init(dev);
+ intel_huc_init(dev);
intel_guc_init(dev);
ret = i915_gem_init(dev);
@@ -532,6 +533,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
cleanup_gem:
i915_gem_fini(dev);
cleanup_irq:
+ intel_huc_fini(dev);
intel_guc_fini(dev);
drm_irq_uninstall(dev);
intel_teardown_gmbus(dev);
@@ -1563,6 +1565,7 @@ int i915_driver_unload(struct drm_device *dev)
/* Flush any outstanding unpin_work. */
flush_workqueue(dev_priv->wq);
+ intel_huc_fini(dev);
intel_guc_fini(dev);
i915_gem_fini(dev);
intel_fbc_cleanup_cfb(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7c81757..8b88227 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -54,6 +54,7 @@
#include "intel_bios.h"
#include "intel_dpll_mgr.h"
#include "intel_guc.h"
+#include "intel_huc.h"
#include "intel_lrc.h"
#include "intel_ringbuffer.h"
@@ -1749,6 +1750,7 @@ struct drm_i915_private {
struct intel_gvt gvt;
+ struct intel_huc huc;
struct intel_guc guc;
struct intel_csr csr;
@@ -2841,6 +2843,7 @@ struct drm_i915_cmd_table {
#define HAS_GUC(dev) (IS_GEN9(dev) && !IS_KABYLAKE(dev))
#define HAS_GUC_UCODE(dev) (HAS_GUC(dev))
#define HAS_GUC_SCHED(dev) (HAS_GUC(dev))
+#define HAS_HUC_UCODE(dev) (HAS_GUC(dev))
#define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \
INTEL_INFO(dev)->gen >= 8)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6abd5e5..549dd3f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -5143,9 +5143,16 @@ i915_gem_init_hw(struct drm_device *dev)
intel_mocs_init_l3cc_table(dev);
/* We can't enable contexts until all firmware is loaded */
- ret = intel_guc_setup(dev);
- if (ret)
- goto out;
+ if (HAS_GUC(dev)) {
+ /* init WOPCM */
+ I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev));
+ I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
+
+ intel_huc_load(dev);
+ ret = intel_guc_setup(dev);
+ if (ret)
+ goto out;
+ }
No -- the call to intel_guc_setup() at least should not be inside the
HAS_GUC() clause. It needs to be called anyway, to ensure execlist mode
is set up correctly if GuC mode is not supported.
See e556f7c16 drm/i915/guc: fix GuC loading/submission check
/*
* Increment the next seqno by 0x100 so we have a visible break
diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h
b/drivers/gpu/drm/i915/i915_guc_reg.h
index cf5a65b..51533f1 100644
--- a/drivers/gpu/drm/i915/i915_guc_reg.h
+++ b/drivers/gpu/drm/i915/i915_guc_reg.h
@@ -61,9 +61,12 @@
#define DMA_ADDRESS_SPACE_GTT (8 << 16)
#define DMA_COPY_SIZE _MMIO(0xc310)
#define DMA_CTRL _MMIO(0xc314)
+#define HUC_UKERNEL (1<<9)
#define UOS_MOVE (1<<4)
#define START_DMA (1<<0)
#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)
+#define HUC_LOADING_AGENT_VCR (0<<1)
+#define HUC_LOADING_AGENT_GUC (1<<1)
#define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h
index 0b4ed88..c4b92f3 100644
--- a/drivers/gpu/drm/i915/intel_guc.h
+++ b/drivers/gpu/drm/i915/intel_guc.h
@@ -160,6 +160,7 @@ extern const char *intel_uc_fw_status_repr(enum
intel_uc_fw_status status);
extern int intel_guc_suspend(struct drm_device *dev);
extern int intel_guc_resume(struct drm_device *dev);
void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_device *dev);
/* i915_guc_submission.c */
int i915_guc_submission_init(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c
b/drivers/gpu/drm/i915/intel_guc_loader.c
index 70575bd..c4a210d 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -270,7 +270,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private
*dev_priv)
I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
/* Finally start the DMA */
- I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+ _MASKED_BIT_DISABLE(HUC_UKERNEL));
/*
* Wait for the DMA to complete & the GuC to start up.
@@ -295,12 +296,12 @@ static int guc_ucode_xfer_dma(struct drm_i915_private
*dev_priv)
return ret;
}
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_device *dev)
{
u32 wopcm_size = GUC_WOPCM_TOP;
/* On BXT, the top of WOPCM is reserved for RC6 context */
- if (IS_BROXTON(dev_priv))
+ if (IS_BROXTON(dev))
No -- dev_priv is preferred.
wopcm_size -= BXT_GUC_WOPCM_RC6_RESERVED;
return wopcm_size;
@@ -332,10 +333,6 @@ static int guc_ucode_xfer(struct drm_i915_private
*dev_priv)
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
- /* init WOPCM */
- I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
- I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
-
/* Enable MIA caching. GuC clock gating is disabled. */
I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
diff --git a/drivers/gpu/drm/i915/intel_huc.h b/drivers/gpu/drm/i915/intel_huc.h
new file mode 100644
index 0000000..946caa7
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2 _MMIO(0xD3B0)
+#define HUC_FW_VERIFIED (1<<7)
+
+struct intel_huc {
+ /* Generic uC firmware management */
+ struct intel_uc_fw huc_fw;
+
+ /* HuC-specific additions */
+};
+
+extern void intel_huc_init(struct drm_device *dev);
+extern int intel_huc_load(struct drm_device *dev);
+extern void intel_huc_auth(struct drm_device *dev);
+extern void intel_huc_fini(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c
b/drivers/gpu/drm/i915/intel_huc_loader.c
new file mode 100644
index 0000000..472fabe
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc_loader.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * On supported platforms, i915's job is to load the firmware stored on the
+ * file system and assist with authentication. It is up to userspace to
+ * detect the presence of HuC support on a platform, on their own.
+ * For debugging, i915 provides a debugfs file, i915_huc_load_status_info
+ * which displays the firmware load status.
+ *
+ * The unified uC firmware loader is used. Firmware binary is fetched by the
+ * loader asynchronously from the driver init process. However, the actual
+ * loading to HW is deferred until GEM initialization is done. Be note that HuC
+ * firmware loading must be done before GuC loading.
+ */
+
+#define I915_SKL_HUC_UCODE "i915/skl_huc_ver1.bin"
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * intel_huc_load_ucode() - DMA's the firmware
+ * @dev: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+ unsigned long offset = 0;
+ u32 size;
+ int ret;
+
+ ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+ if (ret) {
+ DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+ return ret;
+ }
+
+ ret = i915_gem_obj_ggtt_pin(huc_fw->uc_fw_obj, 0, 0);
+ if (ret) {
+ DRM_DEBUG_DRIVER("pin failed %d\n", ret);
+ return ret;
+ }
+
+ /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+ I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+ intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+ /* Set the source address for the uCode */
+ offset = i915_gem_obj_ggtt_offset(huc_fw->uc_fw_obj) +
+ huc_fw->header_offset;
+ I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+ I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+ /* Hardware doesn't look at destination address for HuC. Set it to 0,
+ * but still program the correct address space.
+ */
+ I915_WRITE(DMA_ADDR_1_LOW, 0);
+ I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+ size = huc_fw->header_size + huc_fw->ucode_size;
+ I915_WRITE(DMA_COPY_SIZE, size);
+
+ /* Start the DMA */
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+ /* Wait for DMA to finish */
+ ret = wait_for_atomic((I915_READ(DMA_CTRL) & START_DMA) == 0, 50);
+
+ DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+ /*
+ * We keep the object pages for reuse during resume. But we can unpin it
+ * now that DMA has completed, so it doesn't continue to take up space.
+ */
+ i915_gem_object_ggtt_unpin(huc_fw->uc_fw_obj);
+
+ return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_ucode_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_huc *huc = &dev_priv->huc;
+ struct intel_uc_fw *huc_fw = &huc->huc_fw;
+ const char *fw_path = NULL;
+
+ huc_fw->uc_dev = dev;
+ huc_fw->uc_fw_path = NULL;
+ huc_fw->fetch_status = UC_FIRMWARE_NONE;
+ huc_fw->load_status = UC_FIRMWARE_NONE;
+ huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+ if (!HAS_HUC_UCODE(dev))
dev_priv is preferred for all such macros
+ return;
+
+ if (IS_SKYLAKE(dev)) {
and again.
The rest looks OK.
.Dave.
+ fw_path = I915_SKL_HUC_UCODE;
+ huc_fw->major_ver_wanted = 1;
+ huc_fw->minor_ver_wanted = 5;
+ }
+
+ if (fw_path == NULL)
+ return;
+
+ huc_fw->uc_fw_path = fw_path;
+ huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+ DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+ intel_uc_fw_fetch(dev, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return: non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+ int err;
+
+ if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+ return 0;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+ huc_fw->load_status == UC_FIRMWARE_FAIL)
+ return -ENOEXEC;
+
+ huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+ switch (huc_fw->fetch_status) {
+ case UC_FIRMWARE_FAIL:
+ /* something went wrong :( */
+ err = -EIO;
+ goto fail;
+
+ case UC_FIRMWARE_NONE:
+ case UC_FIRMWARE_PENDING:
+ default:
+ /* "can't happen" */
+ WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ huc_fw->fetch_status);
+ err = -ENXIO;
+ goto fail;
+
+ case UC_FIRMWARE_SUCCESS:
+ break;
+ }
+
+ err = huc_ucode_xfer(dev_priv);
+ if (err)
+ goto fail;
+
+ huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ return 0;
+
+fail:
+ if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+ huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+ DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+ return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+ mutex_lock(&dev->struct_mutex);
+ if (huc_fw->uc_fw_obj)
+ drm_gem_object_unreference(&huc_fw->uc_fw_obj->base);
+ huc_fw->uc_fw_obj = NULL;
+ mutex_unlock(&dev->struct_mutex);
+
+ huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
