On 12/09/2016 21:19, Dave Gordon wrote:
No functional changes; just renaming a bit, tweaking a datatype,
prettifying layout, and adding comments, in particular in the
GuC setup code that touches this data.

Signed-off-by: Dave Gordon <david.s.gor...@intel.com>
---
  drivers/gpu/drm/i915/i915_drv.h         |  1 +
  drivers/gpu/drm/i915/i915_irq.c         |  4 ++--
  drivers/gpu/drm/i915/i915_reg.h         |  2 +-
  drivers/gpu/drm/i915/intel_guc_loader.c | 27 +++++++++++++++++++++------
  4 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1e2dda8..d01a50e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1184,6 +1184,7 @@ struct intel_gen6_power_mgmt {
        bool interrupts_enabled;
        u32 pm_iir;
+ /* PM interrupt bits that should never be masked */
        u32 pm_intr_keep;
/* Frequencies are stored in potentially platform dependent multiples.
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8462817..c128fdb 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -371,7 +371,7 @@ void gen6_disable_rps_interrupts(struct drm_i915_private 
*dev_priv)
        spin_lock_irq(&dev_priv->irq_lock);
        dev_priv->rps.interrupts_enabled = false;
- I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0));
+       I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0u));
__gen6_disable_pm_irq(dev_priv, dev_priv->pm_rps_events);
        I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) &
@@ -4500,7 +4500,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
                dev_priv->rps.pm_intr_keep |= GEN6_PM_RP_UP_EI_EXPIRED;
if (INTEL_INFO(dev_priv)->gen >= 8)
-               dev_priv->rps.pm_intr_keep |= GEN8_PMINTR_REDIRECT_TO_NON_DISP;
+               dev_priv->rps.pm_intr_keep |= GEN8_PMINTR_REDIRECT_TO_GUC;
INIT_DELAYED_WORK(&dev_priv->gpu_error.hangcheck_work,
                          i915_hangcheck_elapsed);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a29d707..70d9616 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7067,7 +7067,7 @@ enum {
  #define VLV_RCEDATA                           _MMIO(0xA0BC)
  #define GEN6_RC6pp_THRESHOLD                  _MMIO(0xA0C0)
  #define GEN6_PMINTRMSK                                _MMIO(0xA168)
-#define   GEN8_PMINTR_REDIRECT_TO_NON_DISP     (1<<31)
+#define   GEN8_PMINTR_REDIRECT_TO_GUC            (1<<31)
  #define GEN8_MISC_CTRL0                               _MMIO(0xA180)
  #define VLV_PWRDWNUPCTL                               _MMIO(0xA294)
  #define GEN9_MEDIA_PG_IDLE_HYSTERESIS         _MMIO(0xA0C4)
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c 
b/drivers/gpu/drm/i915/intel_guc_loader.c
index 853928f..0021748 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -134,13 +134,28 @@ static void direct_interrupts_to_guc(struct 
drm_i915_private *dev_priv)
        I915_WRITE(GUC_WD_VECS_IER, ~irqs);
/*
-        * If GuC has routed PM interrupts to itself, don't keep it.
-        * and keep other interrupts those are unmasked by GuC.
-       */
+        * The REDIRECT_TO_GUC bit of the PMINTRMSK register directs all
+        * (unmasked) PM interrupts to the GuC. All other bits of this
+        * register *disable* generation of a specific interrupt.
+        *
+        * 'pm_intr_keep' indicates bits that are NOT to be set when
+        * writing to the PM interrupt mask register, i.e. interrupts
+        * that must not be disabled.
+        *
+        * If the GuC is handling these interrupts, then we must not let
+        * the PM code disable ANY interrupt that the GuC is expecting.
+        * So for each ENABLED (0) bit in this register, we must SET the
+        * bit in pm_intr_keep so that it's left enabled for the GuC.
+        *
+        * OTOH the REDIRECT_TO_GUC bit is initially SET in pm_intr_keep
+        * (so interrupts go to the DISPLAY unit at first); but here we
+        * need to CLEAR that bit, which will result in the register bit
+        * being left SET!
+        */
        tmp = I915_READ(GEN6_PMINTRMSK);
-       if (tmp & GEN8_PMINTR_REDIRECT_TO_NON_DISP) {
-               dev_priv->rps.pm_intr_keep |= ~(tmp & 
~GEN8_PMINTR_REDIRECT_TO_NON_DISP);
-               dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP;
+       if (tmp & GEN8_PMINTR_REDIRECT_TO_GUC) {
+               dev_priv->rps.pm_intr_keep |= ~tmp;
+               dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_GUC;
        }
  }

More comments is always good and the cleanup just above obviously good as well.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursu...@intel.com>

Regards,

Tvrtko

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to