On Tue, 2016-09-13 at 18:08 -0700, Manasi Navare wrote:
> From: Jim Bride <jim.br...@linux.intel.com>
> 
> Add upfront link training to intel_dp_mst_mode_valid() so that we know
> topology constraints before we validate the legality of modes to be
> checked.
> 

The patch seems to do a lot more things than just what is described
here. I guess, it would be better to split this into multiple patches or
at least provide adequate description here.

> v3:
> * Reset the upfront values but dont unset the EDID for MST. (Manasi)
> v2:
> * Rebased on new revision of link training patch. (Manasi)
> 
> Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: Jim Bride <jim.br...@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c     | 15 ++++----
>  drivers/gpu/drm/i915/intel_dp_mst.c | 74 
> +++++++++++++++++++++++++++----------
>  drivers/gpu/drm/i915/intel_drv.h    |  3 ++
>  3 files changed, 64 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 9042d28..635830e 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -131,7 +131,7 @@ static void vlv_steal_power_sequencer(struct drm_device 
> *dev,
>                                     enum pipe pipe);
>  static void intel_dp_unset_edid(struct intel_dp *intel_dp);
>  
> -static int
> +int
>  intel_dp_max_link_bw(struct intel_dp  *intel_dp)
>  {
>       int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
> @@ -150,7 +150,7 @@ intel_dp_max_link_bw(struct intel_dp  *intel_dp)
>       return max_link_bw;
>  }
>  
> -static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
> +u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
>  {
>       struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>       u8 temp, source_max, sink_max;
> @@ -296,8 +296,7 @@ static int intersect_rates(const int *source_rates, int 
> source_len,
>       return k;
>  }
>  
> -static int intel_dp_common_rates(struct intel_dp *intel_dp,
> -                              int *common_rates)
> +int intel_dp_common_rates(struct intel_dp *intel_dp, int *common_rates)
>  {
>       const int *source_rates, *sink_rates;
>       int source_len, sink_len;
> @@ -321,7 +320,7 @@ static int intel_dp_common_rates(struct intel_dp 
> *intel_dp,
>                              common_rates);
>  }
>  
> -static bool intel_dp_upfront_link_train(struct intel_dp *intel_dp)
> +bool intel_dp_upfront_link_train(struct intel_dp *intel_dp)
>  {
>       struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>       struct intel_encoder *intel_encoder = &intel_dig_port->base;
> @@ -4545,12 +4544,12 @@ intel_dp_long_pulse(struct intel_connector 
> *intel_connector)
>       }
>  
>  out:
> -     if ((status != connector_status_connected) &&
> -         (intel_dp->is_mst == false)) {
> -             intel_dp_unset_edid(intel_dp);
> +     if (status != connector_status_connected) {
>               intel_dp->upfront_done = false;
>               intel_dp->max_lanes_upfront = 0;
>               intel_dp->max_link_rate_upfront = 0;
> +             if (intel_dp->is_mst == false)
> +                     intel_dp_unset_edid(intel_dp);
>       }
>  
>       intel_display_power_put(to_i915(dev), power_domain);
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c 
> b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 54a9d76..98d45a4 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -41,21 +41,30 @@ static bool intel_dp_mst_compute_config(struct 
> intel_encoder *encoder,
>       int bpp;
>       int lane_count, slots;
>       const struct drm_display_mode *adjusted_mode = 
> &pipe_config->base.adjusted_mode;
> -     int mst_pbn;
> +     int mst_pbn, common_len;
> +     int common_rates[DP_MAX_SUPPORTED_RATES] = {};
>  
>       pipe_config->dp_encoder_is_mst = true;
>       pipe_config->has_pch_encoder = false;
> -     bpp = 24;
> +
>       /*
> -      * for MST we always configure max link bw - the spec doesn't
> -      * seem to suggest we should do otherwise.
> +      * For MST we always configure for the maximum trainable link bw -
> +      * the spec doesn't seem to suggest we should do otherwise.  The
> +      * calls to intel_dp_max_lane_count() and intel_dp_common_rates()
> +      * both take successful upfront link training into account, and
> +      * return the DisplayPort max supported values in the event that
> +      * upfront link training was not done.
>        */
> -     lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
> +     lane_count = intel_dp_max_lane_count(intel_dp);
>  
>       pipe_config->lane_count = lane_count;
>  
> -     pipe_config->pipe_bpp = 24;
> -     pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
> +     pipe_config->pipe_bpp = bpp = 24;
> +     common_len = intel_dp_common_rates(intel_dp, common_rates);
> +     pipe_config->port_clock = common_rates[common_len - 1];
> +
> +     DRM_DEBUG_KMS("DP MST link configured for %d lanes @ %d.\n",
> +                   pipe_config->lane_count, pipe_config->port_clock);
>  
>       state = pipe_config->base.state;
>  
> @@ -137,6 +146,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder 
> *encoder,
>       enum port port = intel_dig_port->port;
>       struct intel_connector *connector =
>               to_intel_connector(conn_state->connector);
> +     struct intel_shared_dpll *pll = pipe_config->shared_dpll;
> +     struct intel_shared_dpll_config tmp_pll_config;
>       int ret;
>       uint32_t temp;
>       int slots;
> @@ -150,21 +161,23 @@ static void intel_mst_pre_enable_dp(struct 
> intel_encoder *encoder,
>       DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
>  
>       if (intel_dp->active_mst_links == 0) {
> -             intel_ddi_clk_select(&intel_dig_port->base,
> -                                  pipe_config->shared_dpll);
> -
> -             intel_prepare_dp_ddi_buffers(&intel_dig_port->base);
> -             intel_dp_set_link_params(intel_dp,
> -                                      pipe_config->port_clock,
> -                                      pipe_config->lane_count,
> -                                      true);
> -
> -             intel_ddi_init_dp_buf_reg(&intel_dig_port->base);
>  
> -             intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
> +             /* Disable the PLL since we need to acquire the PLL
> +              * based on the link rate in the link training sequence
> +              */
> +             tmp_pll_config = pll->config;
> +             pll->funcs.disable(dev_priv, pll);
> +             pll->config.crtc_mask = 0;
> +
> +             /* If Link Training fails, send a uevent to generate a
> +              *hotplug
> +              */
> +             if (!(intel_ddi_link_train(intel_dp, pipe_config->port_clock,
> +                                        pipe_config->lane_count, true,
> +                                        false)))
> +                     drm_kms_helper_hotplug_event(encoder->base.dev);
> +             pll->config = tmp_pll_config;
>  
> -             intel_dp_start_link_train(intel_dp);
> -             intel_dp_stop_link_train(intel_dp);
>       }
>  
>       ret = drm_dp_mst_allocate_vcpi(&intel_dp->mst_mgr,
> @@ -336,6 +349,27 @@ intel_dp_mst_mode_valid(struct drm_connector *connector,
>                       struct drm_display_mode *mode)
>  {
>       int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> +     struct intel_connector *intel_connector = to_intel_connector(connector);
> +     struct intel_dp *intel_dp = intel_connector->mst_port;
> +
> +     if (intel_dp->upfront_link_train && !intel_dp->upfront_done) {
> +             bool do_upfront_link_train;
> +
> +             do_upfront_link_train = intel_dp->compliance_test_type !=
> +                     DP_TEST_LINK_TRAINING;
> +             if (do_upfront_link_train) {
> +                     intel_dp->upfront_done =
> +                             intel_dp_upfront_link_train(intel_dp);
> +                     if (intel_dp->upfront_done) {
> +                             DRM_DEBUG_KMS("MST upfront trained at "
> +                                           "%d lanes @ %d.",
> +                                           intel_dp->max_lanes_upfront,
> +                                           intel_dp->max_link_rate_upfront);
> +                     } else
> +                             DRM_DEBUG_KMS("MST upfront link training "
> +                                           "failed.");
> +             }
> +     }
>  
>       /* TODO - validate mode against available PBN for link */
>       if (mode->clock < 10000)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h 
> b/drivers/gpu/drm/i915/intel_drv.h
> index fc2f1bc..b4bc002 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1416,6 +1416,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
>  void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector 
> *connector);
>  void intel_dp_mst_suspend(struct drm_device *dev);
>  void intel_dp_mst_resume(struct drm_device *dev);
> +u8 intel_dp_max_lane_count(struct intel_dp *intel_dp);
>  int intel_dp_max_link_rate(struct intel_dp *intel_dp);
>  int intel_dp_link_rate_index(struct intel_dp *intel_dp, int *common_rates,
>                            int link_rate);
> @@ -1446,6 +1447,8 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, 
> uint8_t voltage_swing);
>  void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
>                          uint8_t *link_bw, uint8_t *rate_select);
>  bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);
> +int intel_dp_common_rates(struct intel_dp *intel_dp, int *common_rates);
> +bool intel_dp_upfront_link_train(struct intel_dp *intel_dp);
>  bool
>  intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t 
> link_status[DP_LINK_STATUS_SIZE]);
>  

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to