Hello,
Linux-6.5.8. X710 Network card, attached via 1meter DAC cable to an
Ubiquiti Aggregation switch (10Gbe).
Networking is fine, throughput as expected, but the X710 stops
forwarding packets after ~20 hours.
I have to "ifconfig enp1s0f1 down ; sleep 1; ifconfig enp1s0f1 up" to
get it working again;
pulling and reinserting the DAC cable does not help.
Interface is part of a linux ethernet bridge device (br0), the X710 is
used purely as a dumb fast
ethernet device, no advances features enabled.
Any ideas what could be wrong?
Thanks!
Manuel
[ 1.327924] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 1.327925] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 1.341521] i40e 0000:01:00.0: fw 6.0.48442 api 1.7 nvm 6.01
0x800035cf 1.1747.0 [8086:1572] [8086:0007]
[ 1.405557] i40e 0000:01:00.0: MAC address: 40:a6:b7:b9:d6:28
[ 1.414463] i40e 0000:01:00.0 eth0: NIC Link is Up, 10 Gbps Full
Duplex, Flow Control: RX/TX
[ 1.414634] i40e 0000:01:00.0: PCI-Express: Speed 8.0GT/s Width x8
[ 1.423363] i40e 0000:01:00.0: Features: PF-id[0] VSIs: 66 QP: 8
RSS FD_ATR FD_SB NTUPLE VxLAN Geneve VEPA
[ 1.435506] i40e 0000:01:00.1: fw 6.0.48442 api 1.7 nvm 6.01
0x800035cf 1.1747.0 [8086:1572] [8086:0007]
[ 1.499379] i40e 0000:01:00.1: MAC address: 40:a6:b7:b9:d6:29
[ 1.503350] i40e 0000:01:00.1: PCI-Express: Speed 8.0GT/s Width x8
[ 1.503796] i40e 0000:01:00.1: Features: PF-id[1] VSIs: 66 QP: 8
RSS FD_ATR FD_SB NTUPLE VxLAN Geneve VEPA
[ 3.405496] i40e 0000:01:00.1 enp1s0f1: renamed from eth1
[ 3.414522] i40e 0000:01:00.0 enp1s0f0: renamed from eth0
[ 3.447993] i40e 0000:01:00.1 enp1s0f1: entered allmulticast mode
[ 3.453846] i40e 0000:01:00.1 enp1s0f1: entered promiscuous mode
[ 3.455960] i40e 0000:01:00.1: entering allmulti mode.
[ 3.457363] i40e 0000:01:00.0 enp1s0f0: entered allmulticast mode
[ 3.457396] i40e 0000:01:00.0 enp1s0f0: entered promiscuous mode
[ 3.458964] i40e 0000:01:00.0: entering allmulti mode.
[284945.387974] i40e 0000:01:00.0: VSI seid 390 Rx ring 1 disable timeout
[284945.388260] i40e 0000:01:00.0: VSI seid 390 Rx ring 2 disable timeout
[284945.388538] i40e 0000:01:00.0: VSI seid 390 Rx ring 3 disable timeout
[284948.609618] i40e 0000:01:00.0: entering allmulti mode.
[344837.196104] i40e 0000:01:00.0: VSI seid 390 Rx ring 1 disable timeout
[344837.196399] i40e 0000:01:00.0: VSI seid 390 Rx ring 2 disable timeout
[344837.196683] i40e 0000:01:00.0: VSI seid 390 Rx ring 3 disable timeout
[344842.966942] i40e 0000:01:00.0: entering allmulti mode.
[451897.400889] i40e 0000:01:00.0: VSI seid 390 Rx ring 1 disable timeout
[451897.401176] i40e 0000:01:00.0: VSI seid 390 Rx ring 2 disable timeout
[451897.401456] i40e 0000:01:00.0: VSI seid 390 Rx ring 3 disable timeout
[451901.231805] i40e 0000:01:00.0: entering allmulti mode.
_______________________________________________
Intel-wired-lan mailing list
[email protected]
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
