Faizal Rahim <faizal.abdul.ra...@linux.intel.com> writes:
> Following the implementation of "igc: Add TransmissionOverrun counter"
> patch, when a taprio command is triggered by user, igc processes two
> commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
> commands unconditionally pass through igc_tsn_offload_apply() which
> evaluates and triggers reset adapter. The double reset causes issues in
> the calculation of adapter->qbv_count in igc.
>
> TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
> activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
> because it doesn't configure any driver-specific TSN settings. So, the
> evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
>
> To address this, commands parsing are relocated to
> igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
> reset will exit after processing, thus avoiding igc_tsn_offload_apply().
>
> Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
> Signed-off-by: Faizal Rahim <faizal.abdul.ra...@linux.intel.com>
> ---
> drivers/net/ethernet/intel/igc/igc_main.c | 33 ++++++++++++-----------
> 1 file changed, 17 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_main.c
> b/drivers/net/ethernet/intel/igc/igc_main.c
> index 87b655b839c1..33069880c86c 100644
> --- a/drivers/net/ethernet/intel/igc/igc_main.c
> +++ b/drivers/net/ethernet/intel/igc/igc_main.c
> @@ -6310,21 +6310,6 @@ static int igc_save_qbv_schedule(struct igc_adapter
> *adapter,
> size_t n;
> int i;
>
> - switch (qopt->cmd) {
> - case TAPRIO_CMD_REPLACE:
> - break;
> - case TAPRIO_CMD_DESTROY:
> - return igc_tsn_clear_schedule(adapter);
> - case TAPRIO_CMD_STATS:
> - igc_taprio_stats(adapter->netdev, &qopt->stats);
> - return 0;
> - case TAPRIO_CMD_QUEUE_STATS:
> - igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
> - return 0;
> - default:
> - return -EOPNOTSUPP;
> - }
> -
> if (qopt->base_time < 0)
> return -ERANGE;
>
> @@ -6433,7 +6418,23 @@ static int igc_tsn_enable_qbv_scheduling(struct
> igc_adapter *adapter,
> if (hw->mac.type != igc_i225)
> return -EOPNOTSUPP;
>
> - err = igc_save_qbv_schedule(adapter, qopt);
> + switch (qopt->cmd) {
> + case TAPRIO_CMD_REPLACE:
> + err = igc_save_qbv_schedule(adapter, qopt);
> + break;
> + case TAPRIO_CMD_DESTROY:
> + err = igc_tsn_clear_schedule(adapter);
> + break;
> + case TAPRIO_CMD_STATS:
> + igc_taprio_stats(adapter->netdev, &qopt->stats);
> + return 0;
> + case TAPRIO_CMD_QUEUE_STATS:
> + igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
Yeah, moving the command parsing to be done earlier sounds like the
right fix:
Acked-by: Vinicius Costa Gomes <vinicius.go...@intel.com>
> if (err)
> return err;
>
> --
> 2.25.1
>
--
Vinicius
